• Journal of Advanced Marine Engineering and Technology
• /
• 제28권1호
• /
• pp.145-151
• /
• 2004

This paper proposes the calculation method of magnetic coupling coefficient of contact-less power supply by the 3D finite element method with a variation of the secondary core position. The primary, secondary self and leakage inductances and the capacitances of a resonant circuit are calculated by the finite element analysis results. The magnetic coupling coefficients are obtained also. The power factors are obtained by simulation for the magnetic coupling coefficients and compared.

• 대한전기학회논문지
• /
• 제34권7호
• /
• pp.276-282
• /
• 1985

This study is concerned with the analysis of two-dimensional steady magnetic fields by the coupling of FEM and BEM. FEM(Finite Element Method)is most widely used as a method of numerical analysis and BEM (Boundary Element Method)is a newest method for it. And the results from this coupling method are compared and discussed with those of FEM only. Consequently, it is shown that to obtain the same accuracy of results the coupling method requires less calculating time and dimension than the FEM.

• Journal of Magnetics
• /
• 제22권2호
• /
• pp.344-351
• /
• 2017

Wireless magnet pumps are used in medical applications and are particularly useful as artificial heart ventricular assist devices (VADs). To investigate wireless operation of magnetic pumps, we fabricated three types of magnetic impellers using bonded magnets by blending magnetic powders of SmFeN, NdFeB, and Sr-ferrite. We investigated the magnetic properties of the fabricated magnetic impellers, which are driven by the application of magnetic coupling with an external driving magnet or external coil system, without a driving motor, shaft, or mechanical bearings. The use of wireless magnetic pumps is therefore not complicated by critical issues of size, heat, and vibration, which are very important issues for blood pumps. The magnetic properties of the impellers, such as their rotational speed, driving torque and hydrodynamic performance, determine their wireless driving ranges. We conducted performance evaluations of the impeller's magnetic wireless manipulation, heat, and vibration. In addition, we carried out an animal test to confirm the suitability of the wireless magnetic pumps for use as biventricular assist devices (BiVADs).

• Journal of Magnetics
• /
• 제9권4호
• /
• pp.121-124
• /
• 2004

NiO thickness dependences of perpendicular magnetic anisotropy (PMA) in the $NiO/[CoFe/Pt]_5$ multilayers for exchange biasing and $[CoFe/Pt]_4/Pt/[CoFe/Pt]_4$ for interlayer exchange coupling were investigated. Perpendicular magnetization curve was obtained by out-of-plane extraordinary Hall measurement. Magnetic force microscopy (MFM) has been used for the investigation of magnetic domains on thin films. We confirmed that the interlayer exchange coupling (IEC) as a function of NiO thickness at room temperature existed with a period of two monolayers.

• Journal of electromagnetic engineering and science
• /
• 제8권1호
• /
• pp.23-27
• /
• 2008

Magnetic coupling delivering wireless power in capsular endoscope(CE) is described in this paper. The characteristic of the magnetic flux linkage coil which generates the induced electromotive force(emf) under the magnetic field was analyzed. With the analyzed results, a magnetic flux linkage coil system was developed and tested. It was confirmed that the magnetic flux linkage coil system could supply more than 50 mW power at 125 kHz without changing the structure of conventional CE.

• Journal of Power Electronics
• /
• 제19권3호
• /
• pp.637-644
• /
• 2019

Wireless power transfer (WPT) technology with various transfer mechanisms such as inductive coupling, magnetic resonance and capacitive coupling is being widely researched. Until now, power transfer efficiency (PTE) and power transfer capability (PTC) have been the primary concerns for designing and developing WPT systems. Therefore, a lot of studies have been documented to improve PTE and PTC. However, power consumption in the standby mode, also defined as the no-load mode, has been rarely studied. Recently, since the number of WPT products has been gradually increasing, it is necessary to develop techniques for reducing the standby power consumption of WPT systems. This paper investigates the standby power consumption of commercial WPT products. Moreover, a standby power reduction technique for WPT systems via magnetic resonance coupling (MRC) with a parallel resonance type resonator is proposed. To achieve a further standby power reduction, the voltage control of an AC/DC travel adapter is also adopted. The operational principles and characteristics are described and verified with simulation and experimental results. The proposed method greatly reduces the standby power consumption of a WPT system via MRC from 2.03 W to 0.19 W.

• 한국자기학회지
• /
• 제26권5호
• /
• pp.149-153
• /
• 2016

Fe/Gd 다층박막 내 자성층간 결합에 미치는 패턴의 영향을 연구하였다. 이를 위하여 하나의 다층박막 시료를 나누어서 패턴한 것과 패턴하지 않은 것으로 제작하여 비교하였다. X선 자기 원편광 이색성(X-ray magnetic circular dichrosim: XMCD)을 이용하여 Gd 원소에 선택적인 자화 벡터의 온도 변화를 비교한 결과, 패턴 시료의 경우 Gd 자화 벡터의 온도의존성이 패턴 전에 비해 뚜렷하게 변화했음을 관측하였다. 이는 패턴 효과와 반강자성의 층간 결합 효과가 서로 경쟁하여 나타난 결과이다.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.747-750
• /
• 2019

웨어러블 디바이스는 일상생활에서 실질적으로 필수적이며 사용자들에게 편리하게 이용되고 건강관리와 의학 분야 등에 활용되고 있다. 전력분야에서 전원 배터리의 사용시간의 한계를 극복하고 효율적인 충전방법에 관한 많은 연구가 진행되고 있다. 무선전력전송은 전선을 사용하지 않고 무선으로 전기장을 부하에 전력을 전달하는 기술이다. 이 전송기술은 저 전력의 스마트폰에서부터 고 전력을 사용하는 철도 충전시스템까지 응용분야가 다양하다. 충전방식은 유도방법과 자기공진방법의 2 종류로 나누는데 자기공진주파수는 13.45 Mhz를 사용하였다. 본 연구에서는 전송효율을 측정 비교하기 위하여 2 종류의 하드웨어를 구현한 후 비교하는데 있다.

• 한국자기공명학회논문지
• /
• 제25권1호
• /
• pp.1-7
• /
• 2021

Employing of 13C stable-isotopes in NMR metabolomics can give unique splitting patterns and coupling constants information originated from 13C-13C coupling interaction that provide an important structural information regarding the cellular metabolic process. But it has been known that an undesirable signal distortion in 2D heteronuclear correlation study, due to 13C-13C interaction, hampers an analysis of the coupling information. Recently, we proposed J-scaled distortion-free heteronuclear single-quantum coherence (HSQC) sequence which provides a distortion-free 13C-13C coupling information with a selective resolution enhancement of JCC splitting. In this paper, we dicuss theoretical aspect and practical feature of J-scaled HSQC pulse sequence. The conceptual explanation of orgin of the signal distortion by 13C-13C coupling interaction and design of J-scaled HSQC through exemplified results are provided in brief.

• Bulletin of the Korean Chemical Society
• /
• 제26권12호
• /
• pp.1965-1968
• /
• 2005

Extended H$\ddot{u}$ckel molecular calculations have been used to analyze how the magnitude of exchange coupling is influenced by the structural distortions in a series of dinuclear six-coordinate copper(II) complexes bridged by the planar bis-bidentate oxalate anion. Copper(II) ions have distorted octahedral surroundings, one being axially elongated and the other compressed. The magnetic interaction is strong in the former complexes and very weak in the latter. This is interpreted as resulting from a switching of magnetic spin orbitals due to the structural distortions (bond elongation or compression) of the copper sites.