• 정보저장시스템학회논문집
• /
• 제3권4호
• /
• pp.191-195
• /
• 2007

The optical disc drive has used a high NA objective lens and a shorter wavelength laser diode for high recording density. But high NA and shorter wavelength cause several margins to become short. Focusing and tracking servo has to be more accurate and active tilt compensation mechanism is also needed for coma aberration compensation. In this paper, we proposed 3-axis moving magnet type actuator. For 3-DOF motion, moving coil actuator has to be equipped with 6 wires for supplying 3 independent signals. However, moving magnet type actuator doesn't need to change the configuration of wires because coils are in stator. So, we added a tilt mechanism to the 2-axis moving magnet actuator which is designed in previous research. Addition of the tilt mechanism cuts down the focus sensitivity. So, maximization the tilting sensitivity and securing the focusing sensitivity are objectivities of this research. DOE (design of experiments) procedures of electromagnetic circuit are performed for parameter study and the optimization is also performed to maximize the tilt sensitivity. And then the final design is suggested and its performance is verified by FE simulation.

• 전기학회논문지
• /
• 제59권4호
• /
• pp.715-721
• /
• 2010

This paper deals with the design and characteristic analysis of electro-magnet/permanent-magnet (EM-PM) hybrid levitation and propulsion device for high-speed magnetically levitated (maglev) vehicle. The machine requires PMs with high coercive force in order to levitate the vehicle by only PMs, and propulsion force is supplied by long-stator linear synchronous motor (LSM). The advantages of this configuration are an increasing levitation airgap length and decreasing total weight of the vehicle, because of the zero-power levitation control. Several design considerations such as machine structure, manufacturing, and control strategy are described. Moreover, the levitation and propulsion device for high-speed maglev vehicle has been designed and analyzed usign the electromagnetic circuit and FE analysis. In order to verify the design scheme and feasibility of maglev application, 3-DOF static force test set is implemented and tested. The obtained experimental data using the static tester shows the validity of the design and analysis approaches.

• International Journal of Control, Automation, and Systems
• /
• 제1권3호
• /
• pp.351-357
• /
• 2003

A method of design optimization for minimization of force ripple and maximization of thrust force in a linear brushless permanent magnet motor without finite element analysis is represented. The design optimization method calculated the driving force in the function of electric and geometric parameters of a linear brushless PM motor using the sequential quadratic programming method. Using electric and geometric parameters obtained by this method, the normalized force ripple is reduced 7.7% (9.7% to 2.0%) and the thrust force is increased 12.88N (111.55N to 124.43N) compared to those not using design optimization.

• 전기학회논문지
• /
• 제66권5호
• /
• pp.765-771
• /
• 2017

This paper presents concurrent design methods of surface permanent magnet synchronous machines for saliency-tracking self-sensing position estimation. Magnetic saliency for the self-sensing is created by stator pole saturation due to the rotor zigzag leakage flux. The power conversion properties such as saliency ratio, torque ripple, and efficiency vary according to motor design. The property change due to design modification is analysed by using finite element analysis, and with the appropriate design modification, proper saliency is created while preserving their power conversion capabilities.

• 전기전자학회논문지
• /
• 제11권1호통권20호
• /
• pp.46-53
• /
• 2007

Design characteristics of PMLSM(Permanent Magnet Linear Synchronous Motor) considering the dynamic running condition under the limited input voltage and current for short reciprocating trajectory are presented. Particularly, the dynamic constraints resulted from the dynamic capability of PMLSM and the required motional performance of the repeated short stroke are applied to determine the design specification of PMLSM. In addition, optimal design flow based on the dynamic constraints is specified with the design parameters, such as coil resistances, the EMF constants, inductances, pole-pitch. Furthermore, proposed methods and results are validated by the experimental ones measured with the purpose-built prototype.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.740-741
• /
• 2015

This paper presents the design and dynamic analysis of surface-mounted type variable flux permanent magnet(VFPM) machines. VFPM machines with a low-coercive-force (LCF) magnetic material have been studied extensively for their potential to improve the efficiency and extend the flux-weakening range of permaennt magnet (PM) machines. In order to implement the design of the VFPM machines effectively, we perform a characteristic analysis of the LCF magnet with respect to design parameters. The analysis results of the designed VFPM machines are compared with measured results, and the validity of the design of the VFPM machines is confirmed.

• Journal of Magnetics
• /
• 제18권3호
• /
• pp.361-364
• /
• 2013

Permanent magnet flux switching motor (PMFSM) is a novel double salient machine which employs PMs instead of field winding for excitation. PMFSM contains only one set of armature winding, thereby features simple control strategy, low cost power inverter and substantial high efficiency. Due to the unique double salient structure and operation principle, the generated cogging torque in PMFSM is critical and quite different compared to the traditional PM machines. This paper presents and investigates various design techniques for reducing cogging torque in PMFSM. Firstly, an analytical model is proposed to study the influence of different methods on cogging torque. Then the optimal design parameters for minimizing cogging torque are determined by the analytical model, which significantly reduces the computational efforts. At last, the cogging torque with different design approaches are simulated by FEA along with the average output electromagnetic torque, which validates the analysis above.

• 한국철도학회논문집
• /
• 제15권2호
• /
• pp.135-140
• /
• 2012

집중권 방식의 견인용 영구자석 매입형 동기전동기(IPMSM)는 출력밀도의 관점에서 우수하나 심각한 영구자석 와전류 손실을 가지고 있다. 본 논문에서는 영구자석 매입형 동기전동기의 자기적 특성을 분석하여 V-타입 회전자 영구자석의 각도와 폭을 변경함으로써 철손을 최소화하는 최적설계를 수행하였다. 자성체의 비선형성을 고려하기 위하여 자기등가회로법 대신 유한요소법을 이용하였으며, 각 파라메타가 영구자석에 발생하는 철손에의 영향 및 파라메타간의 교호작용을 파악하기 위하여 시뮬레이션 기반의 실험계획법을 사용하였다. 이를 통하여 모터의 성능을 유지하면서 철손을 상당히 줄인 집중권 방식의 영구자석 매입형 동기전동기의 최적설계를 반응표면법을 이용하여 도출하였으며, 유한요소법을 이용하여 이를 검증하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2310-2316
• /
• 2011

In order to apply Interior Permanet Magnet Synchronous Motor(IPMSM) to the propulsion system of the railway transit, 110 (kW) class IPMSMs with high-power density are designed as a concentrated winding model and a distributed winding model in this study. The concentrated winding model designed in this study is 6 poles/9 slots and the distributed winding model is 6 poles/36 slots. In general, the eddy current losses in the permanent magnets of IPMSM are caused by the slot harmonics. The thermal demagnetization of the magnet by the eddy current losses at high rotational speed often becomes one of the major problems in the IPMSM with a concentrated windings especially. A design to reduce eddy current losses in permanent magnets design is important in IPMSM for the railway vehicle propulsion system which requires high-speed operation. Therefore, a method to devide the permanent magnet is proposed to reduce the eddy current losses in permanent magnet in this study. Authors analyze the variation characteristics of the eddy current losses generated in permanent magnet of the concentrated winding model by changing the number of the division of the permanent magnets.

• Agricultural and Biosystems Engineering
• /
• 제1권1호
• /
• pp.49-53
• /
• 2000

A magnet assembly is a critical element of a nuclear magnetic resonance(NMR) based sensor. Magnetic flux density and homogeneity are essential to its optimum performance. Geometry and magnet material properties determine the magnetic flux density and homogeneity of the assembly. This study was carried out to develop the design for a magnet assembly. A 2-D finite element model for the magnetic assembly was developed using ANSYS and evaluated the effects of adding shimming frames and steel bars in the corners of the rectangular steel cover which surrounded the magnet. The assembly was manufactured and evaluated. According to the ANSYS model, modified pole frames increased magnetic flux density by 8.3% and increased homogeneity by 83%. Addition of steel bars in the corners increased the magnetic flux density by 1%, and improved homogeneity up to three times. The difference between simulated and measured magnetic flux densities at the center point of the air gap was within 2.4%.