• Asian-Australasian Journal of Animal Sciences
• /
• 제26권6호
• /
• pp.879-885
• /
• 2013

Fifty-four, mixed-sex, halothane-carrier crossbred (Yorkshire${\times}$Landrace) pigs with an average initial BW of $108.2{\pm}0.8$ kg were randomly allotted to one of three dietary treatments for 5 d before slaughter: i) a control corn-soybean meal finisher diet devoid of supplemental magnesium; ii) a diet supplemented with 1.5 g/kg of elemental Mg from magnesium acetate; and iii) a diet supplemented with 1.5 g/kg of elemental Mg from magnesium sulfate heptahydrate. Serum creatine kinase (CK), lactate and glucose were analyzed at slaughter. Muscles from longissimus (LM) were packaged and stored to simulate display storage for muscle lactate and glycogen determinations at 0, 1, 2, 3, and 4 d. Mg supplementation reduced (p<0.05) serum CK and lactate concentration, but had no effect (p>0.05) on serum glucose. Daily change of muscle lactate concentration linearly increased (p<0.01), while glucose concentration linearly decreased (p<0.05) as storage time increased in all treatments. However, dietary Mg acetate and Mg sulfate supplementation in pigs elevated (p<0.05) muscle glycogen and reduced (p<0.05) muscle lactate concentrations, especially during the first 2 d of display, compared with pigs fed the control diet. This study suggests that short-term feeding of magnesium acetate and magnesium sulfate to heterozygous carriers of the halothane gene has beneficial effects on stress response and pork quality by improving blood and muscle biochemical indexes.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권2호
• /
• pp.94-101
• /
• 2016

본 연구는 플라이애시 및 고로슬래그를 활용하여 알칼리 활성화 결합재로 제조된 모르타르 및 페이스트 샘플의 황산염 저항성을 평가하고 황산염 침투에 대한 고저항성 결합재를 제시하는 것이다. 이를 위하여 플라이애시 및 고로슬래그미분말 등의 광물질 혼화재를 결합재로 활용하여 고로슬래그미분말 치환율을 0, 30, 50 및 100%로 제작하였다. 규산나트륨 모듈 $Ms[SiO_2/Na_2O]$은 1.0, 1.5 및 2.0으로 조정하였으며, 초기 24시간 양생조건을 $23^{\circ}C$ 및 $70^{\circ}C$로 하고, 10% 황산나트륨 및 10% 황산마그네슘 용액에 각각 침지시키고, 황산염 저항성을 평가하기 위하여 압축강도, 질량변화율, 길이변화율 및 X선 회절분석을 측정하였다. 그 결과 고로슬래그미분말 치환량 및 Ms비가 증가할수록 재령 28일 압축강도 발현이 우수한 결과가 나타났다. 10% 황산나트륨에 침지한 경우에는 모든 시험조건에서 장기적인 강도발현과 질량 및 길이변화율이 작아 황산나트륨 침투에 대한 저항성이 우수한 것으로 나타났으나, 10% 황산마그네슘에 침지한 경우에는 장기적인 강도저하와 질량 및 길이변화가 크게 나타났으며, 그 경향은 고로슬래그미분말 치환량 및 Ms비가 증가할수록 현저하였다. 이것은 황산마그네슘의 경우 규산마그네슘수화물의 생성으로 인한 열화가 지배적으로 작용한 결과로 판단된다. 또한, X선 회절분석 결과 $MgSO_4$ 용액 침지에서의 알칼리 활성화 결합재의 팽창은 Gypsum($CaSO_4{\cdot}2H_2O$) 생성 반응에 의한 것으로 확인되었으며, 침지 6개월까지는 Gypsum의 생성이 지속적으로 증가되는 것을 알 수 있다.

• 한국건축시공학회지
• /
• 제9권1호
• /
• pp.81-87
• /
• 2009

The purpose of this study is to investigate the sulfate attack resistance of concrete using the EAF(electric arc furnace) Slag as fine aggregate. In order to figure out the effects of magnesium sulfate solution on the durability of concrete using the EAF Slag as fine aggregate, the experiments for the immerging test in the 10% magnesium sulfate solution was executed by selecting factors such as aging processes, replacement ratio(0, 10, 20, 30, 50%), and duration of immerging. The specimens were made with various EAF slag replacements for fine aggregates and with W/C ratio fixed 0.45. compressive strength and S.D.F(Sulfate Deterioration Factor), weight change, and SEM(Scanning Electron Microscope) were tested. From the test results, EAF slag aggregate treated with accelerated aging is better than treated with air aging. The compressive strength and resistance to the sulfate attack is slightly improved with an increase in the EAF slag aggregate treated with accelerated aging replacement for aggregate.

• 한국세라믹학회지
• /
• 제25권3호
• /
• pp.300-306
• /
• 1988

The catalytic effect of salts on formation of ${\alpha}$-calcium sulfate hemihydrate under water vapor at atmospheric pressure was studied and the formation of q-calcium sulfate hemilydrate from by-product gypsum of phosphoric acid process was investigated. The order of catalytic effect of salts are as follow: Ammonium chloride>Sodium succinate>Calcium chloride>Sodium tartrate>Magnesium chloride The prismatic crystals was formed when ammonium chloride, calcium chloride and magnesium chloride was added, whereas the needle crystals was formed when sodium tartrate was added. Ammonium chlorideis most successful in catalytic effects in formation of ${\alpha}$-calcium sulfate hermihydrate for the by-product gypsum of phosphoric acid process.

• Bulletin of the Korean Chemical Society
• /
• 제26권2호
• /
• pp.292-296
• /
• 2005

Physical and chemical properties of thexylboronic acid and its derivatives such as thexylboroxine and ethylene glycol or diethanolamine thexylboronic ester have been studied. Thexylboronic acid can be extracted from an organic solution with an aqueous sodium hydroxide solution as an “te”complex. It is readily converted into thexylboroxine in the presence of anhydrous magnesium sulfate in pentane. It reacts with simple alcohols only slowly; however, it reacts readily with excess diethanolamine in the presence of anhydrous magnesium sulfate to give the corresponding ester.

• Advanced Composite Materials
• /
• 제18권2호
• /
• pp.187-195
• /
• 2009

Much attention has been paid to the processing of inorganic whisker, especially calcium carbonate whisker, which can be used as reinforcement materials of polymer composite due to its low price. Unfortunately, the present synthesis technique of calcium carbonate whisker starts from calcinations of limestone, which involves high energy consumption and furthermore is a highly environment polluting reaction. In this report, needle-like aragonite was synthesized with a reversible solution reaction from limestone without calcination. Optical microscopy, scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques were used to characterize the morphology and crystal structure of intermediates as well as that of the product, aragonite. GCC (grinding calcium carbonate) powder was dissolved in an aqueous solution of magnesium sulfate with reflux and air flush. EDTA titration was used to evaluate reaction rate of the dissolution. A kinetics equation of the dissolution reaction was constructed, which displayed second-order kinetics with respect to the concentration of magnesium sulfate. A rate constant of $0.0015\;l^{-3}{\cdot}mol^{-1}{\cdot}h^{-1}$ was obtained. The dissolution reaction gave fiber-like magnesium hydroxide sulfate and gypsum crystal. Then needle-like aragonite with a length of $9.13\;{\pm}\;1.02\;{\mu}m$ and an aspect ratio of $5.64\;{\pm}\;1.37$ was synthesized from the dissolution product with $CO_2$ bubbling at $70^{\circ}C$.

• Applied Biological Chemistry
• /
• 제37권5호
• /
• pp.370-378
• /
• 1994

두유에 우유를 40% 첨가시킨 두부 제조를 위하여 각 응고제별 및 첨가농도별로 두부를 제조하여 gel형성, 순물(whey)의 탁도, 단백질함량, 두부 생산량, 무기질함량, 조직특성과 색도를 비교 조사하였다. Calcium염 응고제는 0.3%(v/v), magnesium chloride는 0.4%, 유기산 응고제는 0.2% 첨가수준에서 대두와 우유 단백질의 공침전이 일어났으며 각 응고제 첨가비율에 비례하여 whey 탁도와 단백질의 유출량이 낮아졌다. 각 응고제 첨가 적정수준은 calcium acetate, calcium sulfate, calcium lactate 가 각각 1.2%(v/v), calcium chloride, gluconodelta-lactone이 각각 1.0%(v/v), magnesium chloride, lactic acid 0.8%(v/v), acetic acid는 0.6%(v/v)였으며 두부 생산량은 calcium chloride를 응고제로 사용했을 때 가장 높았다. 무기질의 함량은 calcium염 응고제가 유기산 응고제보다 Ca은 약 3.3배 많았고 K, Mg, Na, Fe도 약간 높았다. Texturemeter에 의한 우유 첨가 두부의 조직특성 조사결과 가장 단단한 두부는 acetic acid 두부이었고 calcium염 중에서는 calcium sulfate가 단단하였다. 응고제별 두부의 색도 비교에서 명도는 유기산 두부가 약간 높았고 적색도와 황색도는 calcium염 두부가 높았다.

• 한국축산식품학회지
• /
• 제38권2호
• /
• pp.240-250
• /
• 2018

This study was undertaken to find the optimum soy-peptone, glucose, yeast extract, and magnesium sulfate amounts for the maximum growth of Lactobacillus plantarum JNU 2116 and to assess the effects of these medium factors through the use of response surface methodology. A central composite design was used as the experimental design for the allocation of treatment combinations. In the analysis of the experiment, due to a significant lack of fit of the second-order polynomial regression model that was used at first, cubic terms were added to the model, and then two-way interaction terms were deleted from the model since they were found to be all statistically insignificant. A relative comparison among the four factors showed that the growth of L. plantarum JNU 2116 was affected strongly by yeast extract, moderately by glucose and peptone, and slightly by magnesium sulfate. The estimated optimum amounts of the medium factors for the growth of L. plantarum JNU 2116 are as follows: soy-peptone 0.213%, glucose 1.232%, yeast extract 1.97%, and magnesium sulfate 0.08%. These results may contribute to the production of L. plantarum L67 as a starter culture that may have potential application in yogurt and fermented meat products.

• Fibers and Polymers
• /
• 제5권3호
• /
• pp.230-233
• /
• 2004

The optimum conditions for durable press treatment of cotton fabrics using glyoxal as a nonformaldehyde crosslinking agent were investigated. Crosslinking reaction was conducted in the presence of different catalysts such as aluminum sulfate, magnesium chloride, or magnesium chloride-citric acid mixture at various mole ratios of catalyst to glyoxal. Aluminum sulfate was proven the most effective one among those used. Glycol addition into a glyoxal padding bath increased the wrinkle recovery angle(WRA) and whiteness of treated fabrics. The optimum mole ratio of glycol to glyoxal was 1:1. Diethylene glycol addition produced better overall performance to the glyoxal-crosslinked fabric compared to ethylene glycol addition.

• Journal of Microbiology and Biotechnology
• /
• 제23권2호
• /
• pp.211-217
• /
• 2013

Corynebacterium glutamicum is one of the well-studied industrial strain that is used for the production of nucleotides and amino acids. Recently, it has also been studied as a possible producer of organic acids such as succinic acid, based on its ability to produce organic acids under an oxygen deprivation condition. In this study, we conducted the optimization of medium components for improved succinate production from C. glutamicum under an oxygen deprivation condition by Plackett-Burman design and applied a response surface methodology. A Plackett-Burman design for ten factors such as glucose, ammonium sulfate, magnesium sulfate, potassium phosphate ($K_2HPO_4$ and $KH_2PO_4$), iron sulfate, manganese sulfate, biotin, thiamine, and sodium bicarbonate was applied to evaluate the effects on succinate production. Glucose, ammonium sulfate, magnesium sulfate, and dipotassium phosphate were found to have significant influence on succinate production, and the optimal concentrations of these four factors were sequentially investigated by the response surface methodology using a Box-Behnken design. The optimal medium components obtained for achieving maximum concentration of succinic acid were as follows: glucose 10 g/l, magnesium sulfate 0.5 g/l, dipotassium phosphate ($K_2HPO_4$) 0.75 g/l, potassium dihydrogen phosphate ($KH_2PO_4$) 0.5 g/l, iron sulfate 6 mg/l, manganese sulfate 4.2 mg/l, biotin 0.2 mg/l, thiamine 0.2 mg/l, and sodium bicarbonate 100 mM. The parameters that differed from a normal BT medium were glucose changed from 40 g/l to 10 g/l, dipotassium phosphate ($K_2HPO_4$) 0.5 g/l changed to 0.75 g/l, and ammonium sulfate ($(NH_4)_2SO_4$) 7 g/l changed to 0 g/l. Under these conditions, the final succinic acid concentration was 16.3 mM, which is about 1.46 fold higher than the original medium (11.1 mM) at 24 h. This work showed the improvement of succinate production by a simple change of media components deduced from sequential optimization.