• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.117-121
• /
• 2001

This paper presents a new approach to the calibration of a SCARA robot orientation with a camera modeling that accounts for major sources of camera distortion, namely, radial, decentering, and thin prism distortion. Radial distortion causes an inward or outward displacement of a given image point from its ideal location. Actual optical systems are subject to various degrees of decentering, that is, the optical centers of lens elements are not strictly collinear. Thin prism distortion arises from imperfection in lens design and manufacturing as well as camera assembly. It is our purpose to develop the vision system for the pattern recognition and the automatic test of parts and to apply the line of manufacturing.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.591-595
• /
• 1990

This paper describes a method of aisle following of a mobile robot using machine vision. As a navigation guide, Black strip painted on the lower part of wall of aisle is used. The offset of the vehicle position from the center of aisle and the heading angle are determined from the binary image of guide strip captured by a CCD camera. To remove the effect of noise. i.e. break of guide strip for the door or reflection of light, pixel sampling method together with consistency check of the incline for the sampled pixels is used.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.403-404
• /
• 2008

This report described the development of Vision Inspector program which can simulate numerically the image acquisition process of Machine Vision System for automatic optical inspection of any products. The program consists of an illuminator, a product to be inspected, and a camera with image sensor, and the final image obtained by ray tracing.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.11-13
• /
• 2007

The appearance inspection of various electronic products and parts has been executed by the eyesight of human. But inspection by eyesight can't bring about uniform inspection result. Because the appearance inspection result by eyesight of human is changed by condition of physical and spirit of the checker. So machine vision inspection system is currently used to many appearance inspection fields instead of the checker. However the inspection result of machine vision is changed by the illumination of workplace. Therefore we have used a power-law transformation in this paper. for improvement of vision inspection accuracy and could increase inspection accuracy of vision system. Also this system has been developed only using PC, CCD Camera and Visual C++ for universal workplace.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.3
• /
• pp.274-279
• /
• 2008

Roll to roll (R2R) manufacturing process, also known as 'web processing', has been tried for producing electronic devices on a flexible plastic or metal foil. To increase the performance and productivity the R2R process, effective control and on-line supervision for web quality becomes very important. Wrinkle is one of the defects, which is incurred due to compressive stresses. A system for on-line measurement of wrinkle is developed using area scan camera and machine vision laser. The 2D image, obtained by area scan camera, is produced by Gaussian regression method to characterize the wrinkle on a transparent web. The experiment proves that 0.3mm wrinkle height can be measured successfully with 74fps.

• Journal of Biosystems Engineering
• /
• v.26 no.2
• /
• pp.169-176
• /
• 2001

Defect of apple was depreciated the product value and causes storage disease seriously. To detect the defect of ‘Fuji’apple with machine vision system, the optical characteristics of defect should be investigated. In this research, absorbance spectra of defect were acquired by spectrophotometer in the range of visible and NIR region(400∼1,100nm) and L*a*b* color values were also acquired by colorimeter. NIR machine vision system was constructed with B&W camera, frame grabber, 16 tungsten-halogen lamps, variable focal length lens and NIR bandpass filter which was mounted to lens outward. Average gray values of defect at 15 NIR wavelength were acquired and the significant NIR wavelength was selected by comparing Mahalanobis distance between sound and defective apple. As the result of Mahalanobis distance analysis, the significant wavelength to discriminate the defectives in ‘Fuji’apple were found to be 720nm for scab and 970nm for bruise and cuts and 920nm was also effective regardless of defective types.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.2
• /
• pp.152-158
• /
• 2003

A machine-vision guided inspection system with go-no gauges for inspecting eggcrate assemblies in steam generators is considered. To locate the gauge at the right place, periodic corrective actions for its position and traveling direction are required. We present a machine vision algorithm for determining inserting position and traveling direction of the go-no gauge. The overall procedure of the algorithm is composed of camera calibration, eggcrate image preprocessing, grid-height adjustment, intersection point estimation between two intersecting grids, and adjustment of position and traveling direction of the gauge. The intersection point estimation is performed by using linear regression with a constraint. A test with a real eggcrate specimen shows the feasibility of the algorithm.

• Proceedings of the KIEE Conference
• /
• 2007.11c
• /
• pp.191-193
• /
• 2007

Pantograph sliding plate abrasion auto-detect system, one of the electric rail car auto-detecting devices, is a system that decides how much abrasion and when to replace without an inspector physically looking at the abrasion on the wet plate using machine vision, a cutting-edge technology. This paper covers the cause of deteriorating reliability that affects pantograph wet plate edge detection due to noise added to the video when it rains. In order to remove such noise, problems should be checked through Smoothing, Averaging mask and Median filter using filtering technique and stable edge detection without being affected by noise should be induced in video measurement used in machine vision technology.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.6
• /
• pp.494-500
• /
• 2004

This paper presents a machine vision system, which inspects the measurement of the ALC block on a real-time basis in the production process. The automatic measurement system was established with a CCD camera, an image grabber, and a personal computer without using assembled measurement equipment. Images obtained by this system was processed by an algorithm, specially designed for an enhanced measurement accuracy. For the realization of the proposed algorithm, a preprocessing method that can be applied to overcome uneven lighting environment, boundary decision method, unit length decision method in uneven condition with rocking objects, and a projection of region using pixel summation are developed. From our experimental results, we could find that the required measurement accuracy specification is sufficiently satisfied by using the proposed method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.4
• /
• pp.266-270
• /
• 2016

In this paper, we propose a technique of drowsiness detection using machine vision. The drowsiness of vehicle driver is often the primary cause of motor vehicle accidents. Therefore, the checking of eye images for detecting drowsiness status of driver is critical for preventing these accidents. In our suggested method, we analyze the changes of histogram and edge of eye region images which are acquired using CCD camera. We developed a drowsiness detection system using the histogram and edge change information. The experimental results show that our proposed method enhances the accuracy of detecting drowsiness nearly to 98%, and can be used for preventing vehicle accidents due to the drowsiness of drivers.