• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.75-79
• /
• 2001

This paper presents a novel version of an active voltage clamped ZVS-PWM high frequency inverter using IGBTs for electromagnetic induction eddy current-based rolling drum heating in new generation copy and printing machines in consumer business use. The operating principle of this inverter circuit and unique features are described herein. Its constant frequency duty cycle (asymmetrical PWM) controlled voltage source quasi-resonant soft switching high frequency inverter employing IGBTs is proposed, which is capable of achieving stable and efficient zero voltage soft switching commutation over a widely specified power regulation range from full power to low power. The operating performances in a steady state of this inverter is discussed and evaluated on basis of simulation and experimental results as an induction heated roller in new generation copy machine.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.458-461
• /
• 2002

This study presents development of a machine for shrink wrapping of cans or drink bottles with thermoplastic films. The accurate position-control, the safety factor of chains, the reduction-ratio of the chain and gear, the appropriate heating temperature for banding vinyl are discussed for the optimum shrink wrapping M/C design.

• Journal of Welding and Joining
• /
• 제28권1호
• /
• pp.92-99
• /
• 2010

For the last couple of decades many studies have been carried out to find out solutions to improve the effectiveness and productivity of the plate forming process. The practical way for the automation of the plate forming process has not been, however, developed yet. Since the characteristics of heating machines may be different form each other, it is necessary to investigate the thermal deformation characteristics of the heating machine to be used in the automation system. And their characteristics may be updated as new information about thermal deformation by heating is accumulated. In this paper, data base system has been constructed based on the results of experiments and numerical analyses, which will be used in deriving the deformation estimation formula. The computer code which can automatically derive the deformation estimation formula has been also developed. This paper also illustrates how the formula is updated as experimental data are added. From the present findings, it can be said that the automatic deriving procedure may be important in the automated plate forming system since the heating line information to be generated must be directly influenced by the deformation estimation formula.

• 대한건축학회논문집:구조계
• /
• 제35권10호
• /
• pp.235-243
• /
• 2019

In South Korea, millions of poultry have died due to repeated heat waves every year. The purpose of this study is to analyze the characteristics of heating and cooling loads of chicken houses in Korea and to present an effective insulation and ventilation measures to minimize the damage of poultry due to summer heat wave and to save energy in chicken houses in winter. The heating and cooling loads of standard chicken house were calculated. As a result of the calculation of maximum heating load based on the minimum ventilation rate in winter, the outdoor air temperature requiring heating was $6{\sim}7^{\circ}C$ to keep the indoor air temperature of chicken houses as $24^{\circ}C$. The peak cooling load of chicken houses was mostly taken by the heat generated by chickens and the heat gain due to ventilation. The heat gain through building envelopes was as small as neglectable. Most of chicken houses is usually cooled by gigantic forced ventilation in summer in Korea. When the chicken houses are cooled by electric cooling machine such as cooler or air conditioner, it is more effective to keep minimum ventilation rate to reduce the maximum cooling load. To lower the temperature of supplying water to cooling pad, it is recommended to use the underground water below 10 meters from the ground if there is abundant underground water.

• 한국산업정보학회논문지
• /
• 제29권2호
• /
• pp.47-54
• /
• 2024

현재, 전세계적으로 에너지 자원은 점차적으로 감소하고 있음에도 불구하고 에너지 수요 및 소비는 지속적으로 증가하고 있다. 이에 따른 에너지 자원을 대체하기 위한 범국가적인 노력 및 연구가 수행되고 있다. 에너지 수요에 따른 공급의 증가 뿐만 아니라 에너지를 효율적으로 소비하는 것은 현 에너지 부족 현상을 해결하기 위한 적절한 수단이 될 수 있다. 본 연구는 에너지를 가장 많이 소비하는 제조 공장의 에너지를 효율적으로 소비할 수 있는 방법을 시뮬레이션하고 분석하였다. 제조 공장에서 가장 많은 에너지를 소비하는 HVAC (Heating, Ventilating, and Air Conditioning) 시스템의 효율적인 운전을 위해 온도기반의 제어를 통한 공장의 에너지 최적화 시뮬레이션을 수행하였다. 이를 기반으로 실제 공장의 온도와 전력 데이터를 이용하여 머신러닝 알고리즘을 적용하고 공장 온도를 예측하였다. 또한 예측 온도를 이용한 제어 시스템 시뮬레이션으로 공장 에너지의 소비패턴을 분석하고 에너지(전력량) 소비량을 감소할 수 있는 운전 모델을 제안하였다. 공장 에너지 패턴에 있어 HVAC 시스템의 예측 기반 프리 쿨링을 통한 온도제어 알고리즘은 기존 대비 10% 이상의 에너지 절감 효과를 보여 준다. 이 결과는 HVAC 시스템의 최적 제어가 공장 에너지 소비를 절감할 수 있음을 나타낸다. 향후 본 제어 시스템의 알고리즘은 실제 공장의 최적 제어에 적용되어 에너지 소비 절감 운전을 수행할 예정이다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2004년도 추계학술발표회 발표논문집
• /
• pp.979-980
• /
• 2004

A multi-channel mechanical test machine for HANARO was designed and fabricated based on the design criteria of the multi-channel mechanical test machine sustained at the working conditions of $<400{\square}$, 3 W/g of gamma heating rate, $5{\times}10^{20}\;n/cm^2$, neutron flux and maximum load of 200 MPa. The multi-channel mechanical test machine made of 304 stainless steel consisted of four modules. Two of them locate upper part of the machine and the others locate lower part with 90 degree rotation. Each module was evaluated by determine load-displacement curve of zirconium specimen. Thermal insulators were also made by electron spark-machining of pure aluminum which was prepared in a domestic company.

• Agricultural and Biosystems Engineering
• /
• 제5권2호
• /
• pp.50-54
• /
• 2004

The study aimed to develop a mechanized mushroom growing system for the substrate materials mixing and wetting, materials fermentation and pasteurisation through the design of integrated cultivation machine system for oyster mushroom. The power requirement of the prototype during fermentation operation was measured in the range of 31$\~$33 kg-m and the torque has not so much differ by the kinds and quantity of materials. The work efficiency of conventional method for stacking the heap and turning the heap of cotton waste by tractor rotavator and manual wetting required 78 hours. But the watering, fermentation and sterilisation by the prototype use same operation required 25.5 hours, which can save the operation labour by $67\%$. The machine can be saved the requirement of heating energy by $63\%$, and the machine can also be saved the material cost by $44\%$. It is envisaged that the machine can effectively be used for large mushroom growing farms or joint use mushroom growing group-farmers in a village.

• 설비공학논문집
• /
• 제28권9호
• /
• pp.355-360
• /
• 2016

Continuing to the modeling of heating load, this paper, as the second part of consecutive works, presents LS-SVM (least square support vector machine) based model of winter time apartment hot water supply load in a district heating system, so as to be used in prediction of heating energy usage. Similar, but more severely, to heating load, hot water supply load varies in highly nonlinear manner. Such nonlinearity makes analytical model of it hardly exist in the literatures. LS-SVM is known as a good modeling tool for the system, especially for the nonlinear system depended by many independent factors. We collect 26,208 data of hot water supply load over a 13-week period in winter time, from 12 heat exchangers in seven different apartments. Then part of the collected data were used to construct LS-SVM based model and the rest of those were used to test the formed model accuracy. In modeling, we first constructed the model of district heating system's hot water supply load, using the unit heating area's hot water supply load of seven apartments. Such model will be used to estimate the total hot water supply load of which the district heating system needs to provide. Then the individual apartment hot water supply load model is also formed, which can be used to predict and to control the energy consumption of the individual apartment. The results obtained show that the total hot water supply load, which will be provided by the district heating system in winter time, can be predicted within 10% in MAPE (mean absolute percentage error). Also the individual apartment models can predict the individual apartment energy consumption for hot water supply load within 10% ~ 20% in MAPE.

• Tribology and Lubricants
• /
• 제34권6호
• /
• pp.284-291
• /
• 2018

Ball-milling for reactant powders in advance and using an induction heating system for Ni-Al intermetallic coating process are known to enhance the reactivity of combustion synthesis. In this work, the effects of the charging weight ratio of ball to powder in ball-milling for reactant Ni-Al powders and the synthesizing temperature in induction heating on sliding wear behavior of the coating layers are investigated. Sliding wear behavior of the coating layers is examined against a tool steel using a pin-on-disc type sliding wear machine. As results, wear of the coating layer ball-milled without ball was severely worn out at the sliding speed of 2m/s, regardless of the synthesizing temperature in induction heating. However, the wear rate of the coating layers at the sliding speed was remarkably decreased with increasing the charging weight ratio of ball in ball-milling for reactant powders. This can be explained by the fact that the void in the coating layer is disappeared and the coating layer is densified by the ball-milling. The evidence showed that pitting damages were disappeared on the worn surface of ball-milled coating layer. Consequentially, the Ni-Al intermetallic coating layer could have better wear resistance at all sliding speed ranges with the ball-milling for reactant powders in advance.

• 한국자동차공학회논문집
• /
• 제25권3호
• /
• pp.267-272
• /
• 2017

Automotive seat covers with olefin film imported from foreign companies exhibit some problems such as low peeling strength and high burning rate. The traditional manufacturing process requires gas flame or direct heating for the laminating step. This paper introduces an alternative solution that replaces the olefin film and flame lamination method in making automotive seat covers or interior fabrics. We adopt a new manufacturing concept that applies a water-based resin coating to develop a coating system. The coating machine was successfully developed and tested. Results are intended to contribute to improving the quality and productivity of automotive seat cover production.