• 한국정밀공학회지
• /
• 제20권1호
• /
• pp.229-239
• /
• 2003

The design process of machine tools is regarded as a sequential, discrete, and inefficient works as it requires various kinds of design tools and many working hours. This paper describes an integrated design system embedding a design methodology that can support efficiently and systematically the conceptual structural design of machine tools. The system is a knowledge-based design system and has four machine-tool-specific functional modules including configuration design, configuration analysis, structure design, and structural analysis support module. Through the configuration design and analysis module, a machine configuration appropriate for design requirements is selected, and then the arrangement of ribs fer each structural part is decided in the structure design module. Also, the structural analysis support module is used to evaluate design result by utilizing structural analysis software, ANSYS. The system is applied to design of a tapping machine, and shows that the machine structure can be designed fast and conveniently by processing each design step interactively.

• 한국정밀공학회지
• /
• 제15권5호
• /
• pp.161-166
• /
• 1998

As a part of the configuration design expert system of machine tools, inference mechanisms are constructed in this paper. In addition to procedural inference, the method of multivariable inference is considered as an efficient approach to deal with the cases of highly coupled condition. We propose a generalized multi-variable inference procedure. The procedure is applied to the type selection module of the configuration design expert system of machine tools in order to demonstrate the efficiency and validity.

• 한국산학기술학회논문지
• /
• 제2권1호
• /
• pp.13-17
• /
• 2001

본 논문에서는 공업용 재봉기의 구성설계를 기능적 접근법을 이용하여 수행하였다. 구성설계 방법을 설계에 이용하면 제품의 개발시간을 줄일 수 있고, 기존의 기구 메커니즘 데이터를 효율적으로 이용할 수 있는데 이러한 구성설계를 구현하기 위해 전문가 시스템을 이용 하였다. 설계 구속조건은 전문가 시스템의 추론기능과 CBR(Case Based Reasoning) 방법을 사용하여 만족되도록 하였으며 전문가 시스템의 API 기능을 이용하여 기구해석과 최적설계가 외부 프로그램을 이용하여 수행됨으로서, 공업용 재봉기의 개념설계가 효율적으로 수행될 수 있도록 하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.307-308
• /
• 2010

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.435-440
• /
• 2005

This study describes a new method of constructing Reconfigurable machine tools configurations from a set of modules or components. This proposed method defines combinability vector for each module and mutual combinability coefficient matrix for adjacent two modules. All of machine configurations possible to be generated from any two adjacent modules can be determined by quadratic form of two associated combinability vectors. Furthermore, all of possible RMT configurations generating from a series of multiple modules also can be obtained by multiplying quadratic form of two adjacent conbinability vectors recursively. Our proposed RMT configuration generating method can be successfully applied to determining all of possible machine configurations from several modules or components at conceptual- or preliminary- design stage.

• 한국정밀공학회지
• /
• 제22권3호
• /
• pp.146-153
• /
• 2005

In this paper, a multi-step optimization using genetic algorithm with variable penalty function is introduced to the structural design optimization of a grinding machine. The design problem, in this study, is to find out the optimum configuration and dimensions of structural members which minimize the static compliance, the dynamic compliance, and the weight of the machine structure simultaneously under several design constraints such as dimensional constraints, maximum deflection limit, safety criterion, and maximum vibration amplitude limit. The first step is shape optimization, in which the best structural configuration is found by getting rid of structural members that have no contributions to the design objectives from the given initial design configuration. The second and third steps are sizing optimization. The second design step gives a set of good design solutions having higher fitness for lightweight and minimum static compliance. Finally the best solution, which has minimum dynamic compliance and weight, is extracted from the good solution set. The proposed design optimization method was successfully applied to the structural design optimization of a grinding machine. After optimization, both static and dynamic compliances are reduced more than 58.4% compared with the initial design, which was designed empirically by experienced engineers. Moreover the weight of the optimized structure are also slightly reduced than before.

• 산업공학
• /
• 제11권3호
• /
• pp.23-40
• /
• 1998

In this paper, a method to determine the optimal configuration of operating policies in an integrated-automated manufacturing system using the Taguchi method and computer simulation experiments is presented. An integrated-automated manufacturing system called direct-input-output manufacturing system(DIOMS) is described. We only consider the operational aspect of the DIOMS. Four operating policies including input sequencing control, dispatching rule for the storage/retrieval(S/R) machine, machine center-based part type selection rule, and storage assignment policy are treated as design factors. The number of machine centers, the number of part types, demand rate, processing time and the rate of each part type, vertical and horizontal speed of the S/R machine, and the size of a local buffer in the machine centers are considered as noise factors in generating various manufacturing system environment. For the performance characteristics, mean flow time and throughput are adopted. A robust design experiment with inner and outer orthogonal arrays are conducted by computer simulation, and an optimal configuration of operating policies is presented which consists of a combination of the level of each design factor. The validity of the optimal configurations is investigated by comparing their signal-to-noise ratios with those obtained with full factorial designs.

• 한국정밀공학회지
• /
• 제16권10호
• /
• pp.172-181
• /
• 1999

The objective of this research is to develop a measurement error model for sculptured surfaces in On-Machine Measurement (OMM) process based on a closed-loop configuration. The geometric error model of each axis of a vertical CNC Machining center is derived using a 4${\times}$4 homogeneous transformation matrix. The ideal locations of a touch-type probe for the scupltured surface measurement are calculated from the parametric surface representation and X-, Y- directional geometric errors of the machine. Also, the actual coordinates of the probe are calculated by considering the pre-travel variation of a probe and Z-directional geometric errors. Then, the step-by-step measurement error analysis method is suggested based on a closed-loop configuration of the machining center including workpiece and probe errors. The simulation study shows the simplicity and effectiveness of the proposed error modeling strategy.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.720-723
• /
• 1995

As a part of the configuration design expert system of machine tools, inference mechanisms are constructed in this paper. In addition to procedural inference, the method of multivariable inference is considered as an efficient approach to deal with the cases of highly coupled condition. We propose a generalized multivariable inference procedure. The procedure is applied to the type selection module of the configuration design expert system of machine tools in order to demonstrate the efficiency and validity.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.457-458
• /
• 2010