• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.48.1-48.1
• /
• 2019

We found a diffuse Hα feature with a large size of ~2' around a Herbig star, MWC 1080. It shows a strong correlation with the elongated outflow cavity centered on the star. To investigate the diffuse Hα source and the molecular cavity in detail, we carried out the high-resolution NIR spectroscopy using IGRINS. We detected six hydrogen Brackett line series, seven H2 lines, and an [Fe II] forbidden line. With the obtained spatial, kinematic, and line ratio results, we discuss the characteristics of the central MWC 1080A, the NE outflow cavity, and the SE molecular cloud regions separately. Most of the bright Brγ sources around MWC 1080A were found to be reflection nebulae, but a point-like Brγ source close to another young star, MWC 1080E, was identified as a distinct source due to MWC 1080E itself. The narrow components of the H2 lines observed around MWC 1080A were found to trace PDRs located on the wall of the main outflow cavity. Based on the shock-excited H2 and [Fe II] lines detected just inside a bow-shock shape Hα feature, we suggest that it represents the actual shock at the head of the NE outflow from MWC 1080A. Also, we newly detected the shock-excited H2 and [Fe II] lines with highly blueshifted velocities in the SE molecular cloud region. They could be related to unrevealed outflows from other young stars existing around MWC 1080A.

• 대한생식의학회:학술대회논문집
• /
• 2003.12a
• /
• pp.92-92
• /
• 2003

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.68.1-68.1
• /
• 2019

Using IPHAS $H{\alpha}$ data, we found bright $H{\alpha}$ regions inside the elongated $^{13}CO$ cavity around a Herbig star, MWC 1080. To investigate the ionized hydrogen regions and the molecular cavity, we perform near-IR high-resolution spectroscopic of hydrogen Brackett lines and molecular hydrogen lines by Immersion GRating INfrared Spectrograph (IGRINS) observations. We detected broad Brackett line series and sharp molecular lines with various velocity components. We present three ionized hydrogen regions (near MWC 1080A, MWC 1080E, and CO boundary) with different line widths, central radial velocities, and line ratios. We also show two spatially-separate $Br{\gamma}$ ${\lambda}2.1662{\mu}m$ peaks near MWC 1080A. To reveal a 3D structure of the cavity around MWC 1080, we try to use the detected sharp molecular lines.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.65.2-65.2
• /
• 2018

Through MIRIS $Pa{\alpha}$ Galactic plane survey, a lot of $Pa{\alpha}$ blobs were detected along the plane. To reveal their characteristics, we are planning to collect NIR high-resolution spectroscopic data for them by using Immersion GRating INfrared Spectrograph (IGRINS). Here, we present the preliminary results of the IGRINS observations for a Herbig Be star, MWC 1080, which is one of the $Pa{\alpha}$ blobs detected in Cepheus. This Herbig Be star is known to possess a lot of young stellar objects (YSOs) and bright MIR ($10-20{\mu}m$) nebulosity in its vicinity. From IPHAS $H{\alpha}$ data, we revealed large extended $H{\alpha}$ features that correlate well with MIR and 13CO morphologies around MWC 1080. A part of the $H{\alpha}$ features shows a bow shock shape to the northeast of the primary star MWC 1080A, which seems to be due to an outflow from MWC 1080A. Through IGRINS observations, we detected faint [Fe II] ${\lambda}1.644{\mu}m$ and H2 1-0 S(1) ${\lambda}2.122{\mu}m$ emission lines around the bow shock feature. Interestingly, to the east region of MWC 1080A, we also detected strong [Fe II] and H2 emission lines with a couple of velocity components, which suggests the detection of a new outflow from another YSO. Broad $Br{\gamma}$ ${\lambda}2.1662{\mu}m$ line and H2 lines with various velocity components were detected around the bright MIR and $H{\alpha}$ nebulosity as well.

• Journal of Distribution Science
• /
• v.13 no.7
• /
• pp.41-51
• /
• 2015

Purpose - This study analyzes loading efficiency by loading pattern for package standardization and reduction of logistics costs, along with the creation of revenue for the revenue review panel (RRP) of Membership Wholesale Clubs (MWC). The study aims to identify standard dimensions that can help improve the compatibility of the pallets related to display patterns preferred by the MWC and thereby explore ways to enhance logistics efficiency between manufacturers and retailers through standardization. Research design, data, and methodology - The study investigates and analyzes the current status based on actual case examples, i.e., manufacturer A and Korea's MWC (A company, B company, and C company), and thus devises improvement measures. To achieve this, the case of manufacturer A delivering to MWC was examined, and the actual pallet display patterns for each MWC were investigated by visiting each distribution site. In this study, TOPS (Total Optimization Packaging Software, USA) was used as the tool for pallet loading efficiency simulations the maximum allowable dimension was set to 0.0mm to prevent the pallet from falling outside the parameters, and the loading efficiency was analyzed with the pallet area. In other words, the study focused on dimensions (length x width x height) according to the research purpose and thereby deduced results. Results - The analysis of pallet loading patterns showed that the most preferred loading patterns for loading efficiency according to product specification, such as pinwheel, brick, and block patterns, were used in the case of the general distribution products, but the products were configured with block patterns in most cases when delivered to MWCs. The loading efficiency by loading pattern was analyzed with respect to 104 nationally listed standard dimensions. Meanwhile, No.51 (330 × 220mm) of KS T 1002 (1,100 × 1,100mm) was found to be the dimension that could bring about an improved loading efficiency, over 90.0% simultaneously in both the T-11 and T-12 pallet systems in a loading pattern configuration with the block pattern only, and the loading efficiency simulation results also confirmed this as the standard dimension that can be commonly applied to both the T-11 pallet (90.0%) and the T-12 pallet (90.7%) systems. Conclusions - The loading efficiency simulation results by loading pattern were analyzed: For the T-11 pallet system, 17 standard dimension sizes displayed the loading efficiency of 90.0% or more as block patterns, and the loading capacity was an average of 99.0%. For the T-12 pallet system, 35 standard dimension sizes displayed the loading efficiency of more than 90% as block patterns (the average loading efficiency of 98.6%). Accordingly, this study proposes that the standard dimensions of 17 sizes with the average loading efficiency of 99.0% should be applied in the use of the T-11 pallet system, and those of 35 sizes with the average loading efficiency of 98.6% should be reviewed and applied in the use of the T-12 pallet system.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.1
• /
• pp.11-17
• /
• 2020

This study conducted a case study and a questionnaire analysis in parallel. In the case study, a study was conducted on domestic manufacturer A by analyzing pallet loading efficiency of RRP(Retail Ready Packaging) products and pallet loading efficiency of MWC(Membership Wholesale Club) delivered products. As a result of the pallet loading efficiency simulation of 50 RRP products of Manufacturer A, it was 80.0% based on the T-11 type pallet and 84.3% based on the T-12 type pallet. It was found It refers that the route of producing the product from the manufacturer A and delivering it to the MWC A in the form of RRP resulted in the decrease of the pallet loading efficiency through the change of the loading pattern and the adjustment of the number of loads. As a result of analyzing the questionnaire about whether the overall efficiency of the supply chain will be improved if the operation of the packaging system considering the SCM(Supply Chain Management) aspect is χ² = 178.500, there was a statistically significant difference at the significance level of 0.000. Manufacturers and logistics companies answered "yes" the most, but distributors answered "is average" the most, confirming that the packaging can be constructed with the highest operational efficiency. Therefore, as a result of confirming the impact of packaging design considering the SCM aspect on logistics efficiency, it indicates the importance of closer collaboration between manufacturers and distributors.

• Journal of Technologic Dentistry
• /
• v.41 no.1
• /
• pp.9-19
• /
• 2019

Purpose: This study was conducted to comparative evaluate the marginal and internal gap of three-unit metal frameworks(Co-Cr) fabricated by wax milling method and digital light projection method of CAD/CAM systems. Methods: All the specimens were fabricated by three different fabrication methods: conventional wax up with casting(CWC), milled wax block with casting(MWC), digital light projection with casting(DLPC) (n=10 each). The marginal and internal fits of specimens were examined using a replica technique. The light-body silicone thickness was measured at 8 reference points(each abutment: 16 measurements). All measurements were conducted by a stereomicroscope. Digital photo were taken at $150{\times}$ magnification and then analyzed using a measurement software. The Mann-Whitney test was used for analyzing the results. Results: Statistically significant differences were found between the fabrication methods(p<0.001). The mean(SD) is ${\mu}m$ for fabrication methods, the mean marginal fit were recorded respectively, CWC 63(38), MWC group 50(33), DLPC 103(54) and the mean internal fit CWC 96(47), MWC group 116(41), DLPC 138(66). Conclusion : The marginal and internal fit were statistically different according to the fabrication methods(p<0.001). In all fabrication methods, the greatest misfit was found the occlusal area of all specimens.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.446-454
• /
• 2018

In this work, we summarize the calculation processes of obtaining a scattering factor using with the equilibrium average projection scheme (EAPS), with moderately weak coupling (MWC) interaction, and obtain the line-shape formula of an electron-deformation phonon interacting system interested in the confinement of electrons by squarwell confinement potentials in quantum two dimensional system.. Through the numerical analysis, we analysis the magnetic dependence of absorption power, P(B) in several temperature and frequency difference dependence of absorption power $P({\Delta}{\omega})$, in several external field, where ${\Delta}{\omega}={\omega}-{\omega}_0$ and ${\omega}({\omega}_0)$ is the angular frequency (the cyclotron resonance frequency). The result of equilibrium average projection scheme (EAPS) in SER-MWC explains the properties of quantum transition quite well.

• Journal of Intelligence and Information Systems
• /
• v.20 no.2
• /
• pp.1-17
• /
• 2014

The proliferation of using social media and social networking services affects the lifestyles of people. These phenomena are useful to companies that wish to promote and advertise new products or services through these social media; these social media venues also come with large amounts of user data. However, studies that analyze the data of social media within the perspective of information exchanges are hard to find. Much of the previous research in this area is focused on measuring the performance of exhibitions using general statistical approaches and piecemeal measures. Therefore, in this study, we want to analyze the characteristics of information exchanges in social media by using Twitter data sets, which are relating to the Mobile World Congress (MWC). Using this methodology provides exhibition organizers and exhibitors to objectively estimate the effect of social media, and establish strategies with social media use. Through a user network analysis, we additionally found that social attributes are as important as the popular attribute regarding the sustainability of information exchanges. Consequently, this research provides a network analysis using the data derived from the use of social media to communicate information regarding the MWC exhibition, and reveals the significance of social attributes such as the degree and the betweenness centrality regarding the sustainability of information exchanges.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.94.1-94.1
• /
• 2014

We have carried out IGRINS test observations during its May commissioning run. Our targets were composed of three Luminous Blue Variables (LBVs), one supernova remnant (SNR), and an unidentified stellar source emitting [Fe II] 1.644 um line. In the preliminary results, three LBVs MWC 314, P Cygni, and AFGL 2298 show different characteristics: the spectrum of MWC 314 which is known to be in a binary system clearly shows double-peak structures in hydrogen and iron lines, the P Cygni spectrum reveals the Brackett series of hydrogen emission lines with prominent P-Cygni profiles, and AFGL 2298 likely at its visual minimum phase shows rather different spectrum with relatively weak hydrogen lines. The SNR (G11.2-0.3) was to test the sensitivity of IGRINS for diffuse emission. We successfully detected a dozen H2 emission lines with a velocity width of ~13 km/s, which might indicate a C-shock origin. The unidentified stellar source was one of stellar/compact sources of unknown nature detected in the survey of the Galactic plane in [Fe II] 1.644 um emission line (http://gems0.kasi.re.kr/uwife/). Its spectrum is under investigation. We will present the spectra of test observations and will discuss their scientific significance.