• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.791-792
• /
• 2010

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.116-120
• /
• 1997

The modal testing results of a generator stator frame for a 500MW fossil power plant are presented, which will be used to tune and to validate the finite element model of the stator frame.

• Composites Research
• /
• 제29권6호
• /
• pp.369-374
• /
• 2016

본 연구에서는 굽힘-비틀림 커플링(bend-twist coupled, BTC) 설계개념을 적용한 10 MW급 복합재 풍력 블레이드의 구조 최적 설계를 수행하였다. BTC 설계개념은 동적 하중 상황에서 블레이드의 굽힘과 비틀림 거동 사이의 연동을 유도하여, 단면 받음각 변화에 의한 수동적인 적응 하중저감이 가능하다. 인자연구를 통해 최적의 BTC 설계인자를 추출하여 블레이드 구조설계에 적용하였다. BTC 개념이 동적 하중 감소에 미치는 영향을 가늠하기 위해 블레이드 루트 부에서의 피로등가하중을 계산한 결과, BTC 개념이 적용된 블레이드를 적용한 경우 피로등가하중이 2-3% 정도 감소하는 것을 확인할 수 있었다. BTC 효과를 시험적으로 검증하기 위해 1:29 비율의 블레이드 stiffener 축소모델을 제작하였으며, 정하중 시험을 통해 처짐 거동 시 끝단에서의 비틀림을 측정하였다.

• 대한기계학회논문집A
• /
• 제38권5호
• /
• pp.575-584
• /
• 2014

본 연구에서는 NREL 5MW 풍력발전기 타워 설계 모델을 다물체 동역학과 신뢰성 기반 최적 설계를 이용하여 최적화하는 연구를 수행하였다. 타워 모델은 티모센코 빔 이론을 이용하여 얻은 동특성을 내포한 링크와 조인트로 이루어진 수학적 모델로 표현하였다. 최적화 문제에서는 높이가 일정한 타워에서 두께, 내 외곽 지름이 변할 때 나타나는 민감도 변화를 비교하여 결과를 도출하였으며, 비교 기준으로 굽힘 응력과 좌굴 안정성을 사용하였다. 일계 이차 모멘트법을 이용한 최적화 알고리즘에서 얻은 최종 모델은 유한요소법을 이용한 정하중 해석에서 최대 응력 분포를 이용한 안전성을 고려를 통해 유효성을 검증하였다. 본 연구 방법을 통해 동역학적 모델과 유한요소 모델간의 연계성을 확인하고, 낮은 타워 설치 비용으로 더 강건한 시스템을 구축할 수 있는 설계 방향을 제시하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.368-371
• /
• 2008

The optimal operation condition of gasifier is one of the most important parameters to increase efficiency and reliability in IGCC plant. Also the prediction of the syngas composition and quantity must be predicted to carry out process design of the gasification plant. However, the gasifier process licensor are protective with information on process design and optimal gasifier design conditions. So, the most of process studies in the engineering company for gasification plant have carried out to look for key parameters and optimal design conditions using several prediction methods. In this paper, we present the estimated preliminary optimal operation condition of the 300MW Demonstration Entrain Flow Gasifier using Aspen Plus. The gasifier operation temperature considering slag flow was predicted by FactSage software and Annen Model.

• Journal of Mechanical Science and Technology
• /
• 제18권6호
• /
• pp.895-903
• /
• 2004

In this paper are presented the blade vibration characteristics at the starting conditions of the low pressure multistage axial compressor of heavy-duty 100 MW gas turbine. Vibration data have been collected through strain gauges during aerodynamic tests of the model compressor. The influences of operating modes at the starting conditions are investigated upon the compressor blade vibrations. The exciting mechanisms and features of blade vibrations are investigated at the surge, rotating stall, and buffeting flutter. The influences of operating modes upon blade dynamic stresses are investigated for the first and second stages. It is shown that a high dynamic stress peak of 120 MPa can occur in the first stage blades due to resonances with stall cell excitations or with inlet strut wake excitations at the stalled conditions.

• 천문학회보
• /
• 제42권2호
• /
• pp.77.4-78
• /
• 2017

The presence of double red clump (RC; metal-rich counterpart of horizontal-branch) in high latitude field of the Milky Way (MW) bulge is widely interpreted as evidence for an X-shaped structure originated from the bar instability. However, Lee et al. (2015) recently suggested an alternative model, according to which the double RC is metal-rich manifestation of multiple stellar population phenomenon observed in globular clusters (GCs). Here we show that stars in bright RC are enhanced in CN compared to those in faint RC from our low-resolution spectroscopy. CN traces N, and N-rich stars are also enhanced in Na and He in GCs. Since GCs are the only environment that produce second generation stars with enhanced N, Na, & He, this is a direct evidence that stars in the classical bulge component of the MW were mostly provided by proto-GCs.

• 신재생에너지
• /
• 제6권3호
• /
• pp.47-54
• /
• 2010

Foundation plays an important role in the offshore wind turbine system. Different from conventional foundations, the suction caisson is proven to be economical and reliable. In this work, three-dimensional finite element method is used to check the suitability of suction caisson foundation. NREL 5MW wind turbine is chosen as a baseline model in our simulation. The maximum overturning moment and vertical load at the mudline are calculated using FAST and Bladed. Meanwhile the soil-structure interaction response from our simulation is also compared with the experiment data from Oxford university. The design parameter such as caisson length, diameter of skirt and spacing of multipod are investigated. Accordingly based on these parameters suggestions are given to use suction caisson foundations more efficiently.

• KEPCO Journal on Electric Power and Energy
• /
• 제3권2호
• /
• pp.127-131
• /
• 2017

The present paper describes the slagging field data obtained with the one-dimensional process model for the 500 MW tangentially coal fired boiler in Korea. To obtain slagging field data in terms of thermal resistances [$m^2{\cdot}^{\circ}C/kW$], a number of plant data were collected and analyzed with the one-dimensional modelling software at 500 MW full load. The slagging field data for the primary superheater were obtained for six coal blends, and compared with two TMA (Thermo-Mechanical analyzer) slagging indices and the numerical slagging index, along with the conventional slagging indices which were modified with the ash loading. The advanced two TMA indices for six blended coals give a good slagging tendency when comparing them with the slagging field data, while the modified conventional slagging indices give a relatively poor agreement.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.607-613
• /
• 2011

In this study, structural vibration analyses for a 5MW offshore wind wind-turbine model have been performed for different substructure models. The efficient equivalent modeling method based on computational multi-body dynamics are applied to the finite element models of the present offshore wind turbines. Monopile and tri-pod substructure types of the typical offshore wind-turbine are considered herein. Detailed finite element modeling concepts and boundary conditions are described and the comparison results for previous analyses are presented in order to show the verification of the present numerical approach. Campbell diagrams are also present to investigate the rotational resonance characteristics of the offshore wind-turbines with different substructures.