• 펄프종이기술
• /
• 제40권5호
• /
• pp.36-41
• /
• 2008

Multi-ply sheet forming has many advantages including the possibility of using wide range of materials in a given structure, lowering production cost, making higher grammage products and so on. But, incorrect structure of sheet makes flow resistance higher so that it shows poor dewatering in press section. One of major factors that affect sheet structure and dewatering property is fines content in each layer. We, therefore, examined the press dewatering of multi-ply sheet that has the different fines content in each layer and the effect of fines distribution on physical properties of sheet to find a technology for optimum utilization of raw materials. In case of two layered sheet, the sheet which was composed of layers with the different flow resistance showed higher dewatering rate than one which has the same flow resistance. And the more difference in fines content for layers existed, the more dewatering occurred. For three layered sheets, dewatering is mainly dependent on fines content of bottom layer. Strength properties were affected by dewatering degree and multi-ply sheet structure.

• 한국인터넷방송통신학회논문지
• /
• 제9권1호
• /
• pp.53-59
• /
• 2009

다시점 비디오는 데이터 양이 매우 많아서 이를 효과적으로 저장하고 전송하기 위해서는 새로운 압축 부호화의 기술 개발이 필수적이다. 계층적 깊이 영상은 다시점 비디오를 효과적으로 부호화할 수 있는 방법으로 여러 시점의 컬러와 깊이 영상을 합성하여 하나의 데이터 구조로 만든 것이다. 본 논문에서는 실제 거리비교, 오버랩 문제해결, 보간법을 이용한 효율적인 계층적 깊이 영상 표현을 통해서 다시점 영상에 대한 압축 효율을 향상시키는 방법을 제안 하였다. 실험 결과를 통해서 압축 성능 향상을 얻을 수 있었다.

• 한국통신학회논문지
• /
• 제34권2C호
• /
• pp.186-193
• /
• 2009

다시점 비디오는 데이터 양이 매우 많아서 이를 효과적으로 저장하고 전송하기 위해서는 새로운 압축 부호화의 기술 개발이 필수적이다. 계층적 깊이 영상은 다시점 비디오를 효과적으로 부호화할 수 있는 방법으로 여러 시점의 컬러와 깊이 영상을 합성하여 하나의 데이터 구조로 만든 것이다. 본 논문에서는 실제 거리비교, 오버랩 문제해결, YCrCb 컬러변환을 이용한 효율적인 계층적 깊이 영상 표현을 통해서 다시점 영상에 대한 압축 효율을 향상시키는 방법을 제안하였다. 실험 결과를 통해서 압축성능 향상과 우수한 복원 성능을 얻을 수 있었다.

• 보존과학회지
• /
• 제35권5호
• /
• pp.440-452
• /
• 2019

전통 제철 공정 중 단야공정에서 나타나는 다층구조 무늬의 선명도를 향상시키고자 재현실험을 통해 생산된 사철강(SI)과 탄소의 함량이 다른 3종류의 현대강인 경강(HS), 고탄소강(CS), 니켈탄소강(NiS)을 각각 단접한 소재 SIHS(사철강 + 경강), SICS(사철강 + 고탄소강), SINiS(사철강 + 니켈탄소강)을 대상으로 분석하였다. 사철강과 탄소의 함량이 다른 3종류의 현대강의 접합면에 대한 미세조직 관찰 결과, SINiS의 경우 다른 소재에 비해 단접면의 단접이 잘 이루어졌고 표면무늬 또한 두드러지게 관찰되었다. 결정립 크기는 소재별 큰 차이는 없었으나 경도는 SICS가 가장 높았다. 소재별 접합면에 대한 전자빔 미세분석법 측정 결과, SINiS의 경우 니켈과 탄소가 함유되어 표면무늬의 선명도가 다른 소재에 비해 높은 것으로 관찰된다. 이상의 결과를 통해 전통단접기술의 특징인 다층구조 소재에서 표현되는 표면무늬의 선명도를 높이기 위해서는 니켈이 함유된 탄소강이 가장 적합함을 확인할 수 있었다.

• 대한치과기공학회지
• /
• 제41권3호
• /
• pp.195-201
• /
• 2019

Purpose: This study was investigated the effect of multilayer zirconia block type and sintering method on fracture strength, micro structure and color of zirconia copings. Methods: Three kinds of multi-layered zirconia blocks were used to identify the effects of the kinds of multi-layered zirconia blocks and sintering methods on fracture strength and color reproducibility of zirconia copings. 60 Zirconia copings were fabricated and fracture strength, micro structure and color reproducibility were compared and evaluated. Results: In all the blocks, the CS group, which refers to the general sintering method had higher fracture strength of zirconia copings than the MS group that refers to the microwave sintering method(MCS/MMS; 2,107.5N/1,930.4N, DCS/DMS; 917.0N/879.1N, UCS/UMS; 2,256.9/2,050.7N). In relation to CIE $L^*$, $a^*$, $b^*$ values of zirconia copings depending on the kinds of multi-layered zirconia blocks and sintering methods, the MS group using the microwave sintering method had lower brightness and chroma than the CS group using the general sintering method. Conclusion: In all the blocks, the CS group(general sintering) had higher fracture strength of zirconia copings than the MS group(microwave sintering). In relation to CIE $L^*$, $a^*$, $b^*$ values of zirconia copings depending on the kinds of multilayered zirconia blocks and sintering methods, the MS group using the microwave sintering method had lower brightness and chroma than the CS group using the general sintering method.

• 대한수학회지
• /
• 제42권6호
• /
• pp.1311-1322
• /
• 2005

We consider the several plane sector domains which are bonded together along common edges with vertex at the origin. Such domains appear in electric conducting problem with multi-layered heterogeneous media. Our aim is to give a structure theorem of the singularities of the electric field at the corner. Also, we provide a regularity theorem for the electric field.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.349-356
• /
• 1999

In general, the term soft ground includes clayey soils, which have large compressibility and small shear resistance due to the external load. All process of consolidation in compressible soils can be explained in terms of a transfer of load from an incompressible pore-water to a compressible soil structure. Therefore, one of the most important subjects about the characteristics of the time-dependent consolidation of the clay foundation by the change of load may be the presumption of the final settlement caused by consolidation and the degree of consolidation according to the time. The problems of discontinuous layer interface are very important in the algorithm and programming for the analysis of multi-layered soils using a numerical analysis, finite difference method. Better results can be obtained by the Process for discontinuous layer interface, since it can help consolidation analysis to model the actual ground. The purpose of this paper Provides an efficient computer algorithm based on numerical analysis using finite difference method(F.D.M.) which account for multi-layered soils to determine the degree of consolidation and excess pore pressures relative to time and positions more realistically.

• 한국수소및신에너지학회논문집
• /
• 제22권2호
• /
• pp.199-205
• /
• 2011

Stainless steel 304 and 316 plates were deposited with the multi-layered coatings of titanium film (0.1 um) and gold film (1-2 um) by an electron beam evaporation method. The XRD patterns of the stainless steel plates modified with the multi-layered coatings showed the crystalline phases of the external gold film and the stainless steel substrate. Surface microstructural morphologies of the stainless steel bipolar plates modified with multi-layered coatings were observed by AFM and FE-SEM images. The external gold films formed on the stainless steel plates showed micro structure of grains of about 100 nm diameter. The grain size of the external surface of the stainless steel plates increased with the gold film thickness. The electrical resistance and water contact angle of the stainless steel bipolar plates covered with multi-layered coatings were examined with the thickness of the external gold film.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.1048-1055
• /
• 2003

This paper proposes a new method of solving integrated problems that consist of several sub-problems in a symmetric multi-layered structure, and also demonstrate the applicability of the method. The proposed method is named Symmetric Multi-layered Coevolutionary Algorithm (SMCA). The SMCA imitates partly the natural process of endosymbiotic evolution, which is a special type of coevolution. The SMCA is applied to the process planning problem in flexible manufacturing system (FMS), taking account of the flexibility of machine, tool, process, and sequence. To do this, SMCA's components are studied and its strategies are developed to improve the performance. The proposed algorithm is compared with the existing ones in terms of solution quality. The experimental results confirm the effectiveness of our approach.

• 한국레이저가공학회지
• /
• 제12권4호
• /
• pp.1-5
• /
• 2009

Conventional patterning based on wet-process for multi-layered film is a relatively complex and costly process though it is a necessary step for fabrication of TFT-LCD module. Recently, a direct pattering by laser has been studied because it is low cost and simple process compared to the wet process. In this work, the selective removal process of multi-layered film (polyimide/indium tin oxide/glass) is studied by modeling the thermal and mechanical behavior for multi-layered structure. Especially, the effects of thickness of polyimide layer are examined.