• Environmental Engineering Research
• /
• v.25 no.1
• /
• pp.129-134
• /
• 2020

The main reason that drives many developing countries to pursue waste-to-energy (WtE) technologies is that it produces energy while eliminating build-up of large quantities of wastes, at a time, when oil and gas reserves are declining. The rate of generation of municipal solid wastes (MSW) in any given country depends on many factors including economy, population, and modernization of industry and infrastructure developments. The United Arab Emirates (UAE) is a federation of seven emirates that has grown to be one of the Middle East's most important economic centers. UAE has also become one of the highest waste producing countries due to fast development and growth; thus, UAE pursue modern technologies to covert generated wastes into energy. In this communication, the status of on-going waste to energy projects and WtE plants that are currently under design and construction in UAE are discussed. The need for development of WtE technologies is presented based on the literature, reports, economics and the environmental regulations.

• New & Renewable Energy
• /
• v.19 no.4
• /
• pp.35-45
• /
• 2023

Global efforts are focused on achieving carbon neutrality due to the increases in the levels of greenhouse gases. Moreover, the greenhouse gases generated from the disposal of municipal solid waste (MSW) are the primary sources of emissions in South Korea. In this study, we conducted the biological conversion of syngas (CO, H₂, and CO₂) generated from MSW gasification. The MSW-derived syngas was used as a feed source for cultivating Eubacterium limosum KIST612, and pressurization was employed to enhance gas solubility in culture broth. However, the pH of the medium decreased owing to the pressurization because of the CO₂ in the syngas and the cultivation-associated organic acid production. The replacement of conventional HEPES buffer with a phosphate buffer led to an approximately 2.5-fold increase in acetic acid concentration. Furthermore, compared with the control group, the pressurized reactor exhibited a maximum 8.28-fold increase in the CO consumption rate and a 3.8-fold increase in the H2 consumption rate.

• Clean Technology
• /
• v.18 no.4
• /
• pp.360-365
• /
• 2012

With rapid increase in municipal solid waste (MSW) due to the rising economy, solid waste gasification emerges as one of the promising technologies. Separation of the carbon monoxide (CO) and hydrogen ($H_2$) from syngas obtained by gasification of MSW was studied using the polyamide composite membrane. The separation characteristics of the CO and $H_2$ were studied at different gas flow rates and stage cuts. The permeability of CO and $H_2$ along with the selectivity of $H_2$ with respect to CO was obtained. Furthermore, the Arrhenius plots were obtained to estimate the activation energies of CO and $H_2$ permeabilites.

• Journal of Environmental Impact Assessment
• /
• v.18 no.6
• /
• pp.453-460
• /
• 2009

In order to provide fundamental data for developing high-grade(high-quality and low-pollution) Refuse Derived Fuel(RDF), we analyzed caloric value and HCl content by Municipal Solid Waste(MSW) type. The caloric value was analyzed using calorimeter and HCl content was analyzed using mercury(II) thiocyanate method. In case of paper type the caloric value was 3,060~3,608kcal/kg and the HCl content was 239~6,135ppm. In case of vinyl-plastics the caloric value was 5,946~9,888kcal/kg and the HCl content was 429~455,771ppm. According to the result of quality assessment by MSW type, the calroric value of vinyl-plastics type was showed higher than that of paper type and in case of HCl content the paper type was showed lower than vinyl-plastics type. So, We mixed paper and plastic wastes. The caloric value of mixed MSW(paper and plastics) was 5,046~9,125kcal/kg and the HCl content was 239~6,135ppm. Also, The caloric value of packaging waste(film-plastics) was 5,982~8,045kcal/kg. Therefore It is possible to develop high-grade Refuse Derived Fuel through suitable mixing of paper and plastic in municipal solid waste.

• Advances in environmental research
• /
• v.2 no.1
• /
• pp.51-60
• /
• 2013

The paper aims to characterise the waste generated in municipality of Varanasi, the most populated city in the state of Uttar Pradesh, India. MSW is a heterogeneous waste and composition of the waste varied from season to season. The generation, collection and management of waste have become a major environmental problem in most of the developing cities. MSW was collected from open dumping grounds for 2 consecutive years. Each year was classified into 3 seasons of 4 months. On analysis it was found that the biodegradable fraction is always more than other fractions with a minimum of 48.25% in rainy season. With such a high fraction of biodegradable wastes, options such as composting and biomethanation could be tried to convert waste into energy. The average weight of waste generation at present is 0.460 kg per capita per day. The study showed that waste generation and collection were increasing every year, which may be attributed to increase in population.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.3
• /
• pp.76-85
• /
• 2004

Anaerobic decomposition of municipal solid waste (MSW) had potential adverse impacts such as the production of methane and long-term post closure on human health and the environment. It was demonstrated that aerobic degradation of MSW resulted in the reduction of a methane yield and the enhancement of stabilization of MSW. Excavated solid wastes were both aerobically and anaerobically treated in order to evaluate the effects of air injection on the stabilization of landfill site. The municipal solid waste (MSW) samples were excavated from a 10-year old landfill (operation period: 1991. 11~1994. 11), Jeonju, Korea. Excavated municipal solid wastes are primarily composed of soils and vinyl/plastics. For the two aerobic simulated lysimeters, the levels of $O_2$ ranged 1.6~23.1% and the levels of $CO_2$ ranged 1.5~15.1%, which confirmed the aerobic decomposition. Aeration did prevent methane formation. For the anaerobic simulated lysimeter, the $CO_2$ rose as $O_2$ was consumed and low levels of CH4 were produced. The pH levels ranged from 7.7 to 8.9 for anaerobic lysimeter and from 7.3 to 8.5 for aerobic lysimeters. As expected, aerobic treatment proved to enhance the removal of biodegradable materials in the excavated solid wastes when monitoring the concentration of BOD, COD, $NH_4-N$, and $NO_3-N$ in the leachate.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.2
• /
• pp.159-165
• /
• 1999

Experimental studies have been performed to observe the basic phenomena of waste bed combustion in MSW incinerator. A reduced scale apparatus was utilized to simulate the combustion behavior in real plant with 1-dimensional transient behavior at the experimental setup, which uses wet cubic wood with ash content as simulated waste. LHV (lower heating value) of solid fuel, fuel particle size and flow rate of combustion air were taken as important parameters of the bed combustion. For the quantitative analysis, FPR (flame propagation rate), TBT (total burn-out time) and PBT (particle burn-out time) was defined. LHV represent the capability of heat release of the fuel, so that a higher LHV results in faster reaction rate of the fuel bed, which is shown by higher FPR. Fuel particle size is related with surface area per unit mass as well as heat and mass transfer coefficient. As the particle size increases the FPR decreases owing to decreasing specific surface area. Air injection supplies oxygen to the reaction zone. However oversupply of combustion air increases convection cooling of the bed and possibly extinguishes the flame.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.3
• /
• pp.65-74
• /
• 2008

In this study, the composition and physico-chemical characteristics of municipal solid waste (MWS) which was treated in four different area were investigated. It is necessary to measure the characteristics of MSW to build a waste treatment and Refuse Derived Fuel (RDF) facility, the data-base and total managing of the landfill. It was found that the average density of solid wastes is in the range of $78.15-199.8kg/m^3$. This MSW was composed of 8.87% of food wastes, 38.8% of papers, 34.12% of plastics & vinyls, 7.16% of textiles, 0.96% of wood, 1.3% of rubber & leathers and others, respectively. Most of MSW are composed of food, paper and plastic waste and more than 94% was combustible waste. For three components, moisture is 17.38%, combustible component is 69.03% and ash is 6.24%. The chemical element has the high order of carbon, oxygen, hydrogen on the dry basis of wastes. And the low heating value of the MSW which is measured by calorimeter is calculated as 2973.8 kcal/kg and high heating value of the MSW is calculated as 5209.94 kcal/kg.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.2
• /
• pp.109-117
• /
• 2007

In order to investigate the quantitative and qualitative properties of leachate with different composition of MSW in solid waste landfill, three lysimeters filled with bottom ash only (Lysimeter A), bottom ash 70%+municipal solid waste 30% (Lysimeter B), and municipal solid waste only (Lysimeter C) respectively were operated under actual meteorological conditions. From the results, Lysimeter A and Lysimeter B were much higher than Lysimeter C in terms of cumulative generation rates of leachate. The pH in leachate from Lysimeter A are in the range of pH 9 to 11, however, the pH of the leachate was gradually changed to the neutral with time. In the case of $Cl^-$, leachates from Lysimeter A and B with bottom ash have high $Cl^-$ concentration whereas leachate produced from Lysimeter C has low $Cl^-$ concentration. In the Lysimeter C with municipal solid waste only, concentration of organic materials in the leachate was much higher than that of leachate produced from the other Lysimeters.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.3
• /
• pp.93-101
• /
• 1998

This study was carried out to investigate and analyze the citizen's attitude for the issue of the municipal solid wastes in Miryang city. The waste generation rate was decreased by 56% compared with 1991, and 71.8% of generated wastes were treated by landfill method. 61.6% among respondents were contacted waste problem by TV and the majority of respondents felt seriousness of food-waste problem. The majority of people felt that waste discharge decreased after "volume-base charge system" and 71% of total respondents were burdened down with use of volume-base charge envelope. The greater part of citizens answered that they experienced damage due to wastes and satisfied with the collection system but they recognized the necessity of the establishment of collection system and increase of cleaners must be nessary.