• 제목/요약/키워드: MSDs

검색결과 296건 처리시간 0.023초

환경정보 검색 시스템의 활용에 관한 연구 : 대기오염 물질의 위험성 확인을 중심으로 (A Study on Environmental Information System for Hazard Identification of Air Pollutants)

  • 김선정;신동천;정용;구자건
    • 환경영향평가
    • /
    • 제5권1호
    • /
    • pp.107-121
    • /
    • 1996
  • The objective of this study is to establish the application method of environmental information system which is related to hazard identification for Health Risk Assessment. For establishing the environmental information system, fourteen hazardous chemicals were chosen and applicated to the database network such as RTKNET(Right Know Net), MSDS(Material Safety Data Sheets), TRI(Toxic Release Inventory), IRIS, AIRS, etc. The searching method of environmental information is classified to three sections such as the domestic commercial information company, international database agencies, and internet. Recently the importance of environmental information is being emphasized because it is essential 10 use database system in the field of environmental studies. Most of the foreign research organizations are communicating actively for information exchange, and the improvement of the quality of research. It is required to accumulate the data and develop them to database for future research.

  • PDF

우리나라에서 사용되는 일부 신나의 구성성분에 관한 연구 (A Study on Composition of Thinners Used in Korea)

  • 백남원;윤충식;조경이;정희명
    • 한국산업보건학회지
    • /
    • 제8권1호
    • /
    • pp.105-114
    • /
    • 1998
  • In this study, 108 thinners were analyzed to identify their composition. The purposes of this study were to provide the data for MSDS and worker exposure levels. Thinners were collected from manufacturing industries, distributors and users. Wide ranges of thinner components were found ; Toluene, xylene, and ethyl benzene were most often found. Next, MIBK, cellosolve acetate, butyl cellosolve, and butyl acetate were found in 20-40 thinners. Others, such as acetone, n-hexane, cyclohexane, heptane, methylcyciohexane, octane and nonane were also found. There were about 5-6 components in each thinner. In the view point of Industrial Hygiene, Benzene was the most important component of thinners, which procures leukemia. Benzene was found from 8 kinds of thinners out of the total 108 surveyed. Thus, Content of benzene in thinners must be evaluated when industrial hygiene surveys are performed. Aromatic hydrocarbons were identified from 71 kinds of thinners out of total 108 and their contents were 10-87%. Alkanes were not contained in automobile painting, spraying, degreasing, urethane and epoxy thinners but lacquer, enamel and coating thinners.

  • PDF

Critical Review on the Carcinogenic Potential of Pesticides Used in Korea

  • Choi, Sangjun
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제15권15호
    • /
    • pp.5999-6003
    • /
    • 2014
  • Pesticides used in Korea are grouped by four classes of hazard (extremely, highly, moderately and slightly hazardous) based on acute oral and dermal toxicity in the rat. However, there is little information of carcinogenic effects. The aim of this study was to evaluate potential carcinogenicity for active ingredients of pesticides used in Korea. A total of 1,283 pesticide items were registered under the Pesticide Control Act of which 987 were commercially available. Of these 987 items, 360 active ingredients not duplicated were evaluated for carcinogenicity using the carcinogen list established by the US Environmental Protection Agency (EPA). Some 25 out of 360 ingredients were classified as likely to be carcinogenic (probable) to humans and 52 had suggestive evidence of carcinogenic potential (suspected) based on the US EPA classification. Some 31% of 987 items contained probable or suspected human carcinogenic ingredients. Carcinogenic pesticides accounted for 24% (5,856/24,795 tons) of the total volume of consumption in Korea. Interestingly, pesticides with lower acute toxicity were found to have higher carcinogenic potential. Based on these findings, the study suggests that it is important to provide information on long-term toxicity to farmers, in addition to acute toxicity data.

스마트폰 사용량과 근골격계질환 관련 자각증상과의 관련성에 관한 연구 (An empirical study on relationship between symptoms of musculoskeletal disorders and amount of smartphone usage)

  • 엄수현;최서연;박동현
    • 대한안전경영과학회지
    • /
    • 제15권2호
    • /
    • pp.113-120
    • /
    • 2013
  • This study was conducted to investigate the characteristics of smartphone usage and posture of users during using smartphone. A survey was conducted for 983 smartphone users to understand the association between smartphone usage and including subjective symptoms associated with musculoskeletal disorders. Main results from the survey were as follows; 1) 18.8% of the subjects experienced musculoskeletal symptoms at least at one of body parts. Specifically, 8.1%, 5.6%, 4.1%, and 11.3% of the subjects experienced musculoskeletal symptoms at neck, shoulder, elbow, and hand respectively, 2) The symptoms of musculoskeletal disorders were also associated with amount of text message and time for daily usage of smartphone. Specifically, relative risks of musculoskeletal disorders at hand/wrist/fingers in terms of "amount of text message" and "time for daily usage" for experienced user were 1.425 and 1.368 respectively to inexperienced user. This study identified 'amount of text message' and 'time for daily usage' as the major risk factors of smartphone usage in terms of musculoskeletal symptoms. The results of the study provided a good basis in order to remove or reduce the risks associated with musculoskeletal symptoms due to smartphone usage.

아니솔의 연소특성치의 측정에 의한 MSDS의 적정성 (Appropriateness of MSDS by Means of the Measurement of Combustible Properties of Anisole)

  • 하동명
    • 한국화재소방학회논문지
    • /
    • 제29권2호
    • /
    • pp.20-24
    • /
    • 2015
  • 아니솔의 안전한 취급을 위해, 폭발한계는 문헌을 통해 고찰하였고, 인화점과 발화지연시간에 의한 발화온도를 측정하였다. 그 결과, 밀폐식 장치에 의한 아니솔의 하부인화점은 $39^{\circ}C$$42^{\circ}C$로 측정되었으며, 개방식에서는 $50^{\circ}C$$54^{\circ}C$로 측정되었다. ASTM E659 장치를 사용하여 자연발화온도와 발화지연시간을 측정하였고, 아니솔의 최소자연발화온도는 $390^{\circ}C$로 측정되었다. 측정된 하부인화점에 의한 폭발하한계는 1.07 Vol%로 계산되었다.

Ames test 결과와 QSAR을 이용한 변이원성예측치와의 비교 (Comparison of QSAR mutagenicity prediction data with Ames test results)

  • 양숙영;맹승희;이종윤;이용욱;정호근;정해원;유일재
    • 한국환경성돌연변이발암원학회지
    • /
    • 제20권1호
    • /
    • pp.21-25
    • /
    • 2000
  • Recently there is increasing interest in the use of structure activity relationships for predicting the biological activity of chemicals. The reasons for the interest include the decrease cost and time per chemical as compared with animal or cell system for identifying toxicological effects of chemicals and the reduction in the use of animals for toxicological testing. This study is to test the validity of the mutagenicity data generated from QSAR (Quantitative Structure Activity Relationship) program. Thirty chemicals, which had been evaluated by Ames test during 1997-1999, were assessed with TOPKAT QSAR mutagenicity prediction module. Among 30chemicals experimented, 28 were negative and 2 were positive for Ames test. On the contrary, 23 chemicals showed the high confidence level indicating high prediction rate in mutagenicity evaluation, and 7 chemicals showed the lsow to moderate confidence level indicating low prediction in mutagenicity evaluation. Overall mutagenicity prediction rate was 77% (23/30). The prediction rates for non-mutagenic chemicals were 79% (22/28) and mutagenic chemicals were 50% (1/2). QSAR could be a useful tool in providing toxicological data for newly introduced chemicals or in furnishing data for MSDS or in determining the dose in toxicity testing for chemicals with no known toxicological data.

선박거주구 제조업 종사자의 직무스트레스와 작업능력에 관한 연구 (A Study on Job Stress and Work Ability of Workers in the Deckhouse Manufacturing Industry)

  • 김명우;장성록
    • 한국안전학회지
    • /
    • 제26권6호
    • /
    • pp.79-84
    • /
    • 2011
  • There have been so many studies related to job stress or musculoskeletal disorders(MSDs) in the shipbuilding industry. However, study of employee performance evaluation that reflect on the industrial features of the deckhouse manufacturing industry has not been established. Therefore, this study aimed to evaluate workers' job stress and work ability through statistical significance tests according to age, work types, years of service, work forms and sex. For this, the study conducted a job stress test using the Korean Occupational Stress Questionnaire Short Form, and employee performance evaluations using the Work Ability Index(WAI) of the Finnish Institute of Occupational Health (FIOH) on 536 workers in the deckhouse manufacturing industry. MINITAB statistics program was used for statistics analysis and significance was verified with the Kruskal-Wallis test, a corporate body of nonparametric statistical analysis. As a result, employee performance had significant differences, depending on age, work types, years of service and sex, and job stress also depended on the number of service year and work form. Additionally, it was found that employee performance decreased more as job stress increased.

Prevention of Work-related Musculoskeletal Disorders in Grapes Pinching by Using Electro-motion Scissors Designed Ergonomically

  • Chae, Hye-Seon;Kim, Sung-Cheol;Kim, Kwan-Woo;Lee, Kyung-Suk;Kim, Hoy-Cher;Park, Keun-Sang
    • 대한인간공학회지
    • /
    • 제30권6호
    • /
    • pp.749-755
    • /
    • 2011
  • Objective: The purpose of this study is to assess the reducing effect of workload on developed electro-motion scissors. Methods: To achieve this, we measured the pressure distribution, Joint angle of fingers and JSI(Job Strain Index) for electro-motion scissors and hand-operated scissor in objective assessment and surveyed the uncomfortable degree in subjective assessment. Results: As a result, The peak of pressure in the electro-motion scissors was generally lower than the hand-operated scissors. JSI and overall joint angle of fingers for the electro-motion scissors were remarkably lower than the hand-operated scissors. Also, the subjective uncomfortable degree showed that the uncomfortable point of electro-motion scissors were generally lower than the hand operated scissors. Conclusion: The impact of reducing the work load as well as distributing the pressure around the hand by using electro-motion scissors during grapes pinching was confirmed.

석유화학산업의 근골격계질환 실태에 관한 연구 (A Study on the Musculoskeletal Disorders in Petrochemical Industry)

  • 박정식
    • 대한안전경영과학회지
    • /
    • 제8권3호
    • /
    • pp.77-86
    • /
    • 2006
  • After conducting an investigation of a specific workplace, 372 labor workers, who are employed at a certain domestic petrochemical company valve operating and maintenance processing section, were personally questioned about specific work-related ailments. According to the results, 57% of workers who were working in the petrochemical industry have suffered from pain-related musculoskeletal disorders in, at least, more than 1 body part. Specifically, there are more than 28% of workers suffering from pain in more than two body parts. Among the total work population, 18.8 % of workers are assumed to have a high probability of being diagnosed with musculoskeletal disorder. Also, according to the RULA checklist which evaluates environmental improvement conditions of the workplace, 76.7% of workplaces among the inspected areas have high hazardous work factors that are related to musculoskeletal disorder and needs to be improved upon and observed right away or in the foreseeable future. The prior factor has a high correlation and pain rate which is due to an improper work posture. Originally, this improper work posture is caused mostly by ergonomically incorrect facility design. Furthermore, the structure of the workplace does not consider the worker's individual build.

ADN계열 액상추진제의 합성 및 특성 연구 (Synthesis and characterization of ADN based green monopropellants)

  • 김우람;권윤자;조영민
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2017년도 제48회 춘계학술대회논문집
    • /
    • pp.409-411
    • /
    • 2017
  • 미사일 추력기 체계에 적용되는 하이드라진[$N_2H_4$]추진제는 MSDS-OHS 유해성 분류상 급성독성 물질로서 사용이 제한되고 있는 바, 다양한 대체물질이 개발 중이다. 최근 해외에서 안전성과 취급이 우수한 질산 히드록실암모늄[$NH_3OHNO_3$]과 암모늄 디나이트라마이드[$NH_4N(NO_2)_2$] 기반 단일계 액상추진제가 개발중이며, 이 물질들을 이용한 추력기 시스템 적용 시험이 진행되고 있다. 그러나 저온에서의 연로물질 산성화 반응으로 인한 디나이트라마이드[$N(NO_2)_2{^-}$] 물질의 분해는 나이트레이트[$NO_3{^-}$] 이온 생성을 촉진시키며, 부수적으로 발생하는 침전물은 촉매 및 노즐의 막힘 현상을 유발하므로 추력기 성능의 저해요인으로 작용한다. 그러므로 저온분해 방지를 위한 첨가제 조성 개발 및 열분해 특성 연구가 최근의 관심사이다. 본 연구는 합성/정제/추출한 암모늄 디나이트라마이드 산화제를 주요 조성물로 적용하였으며, 염기성 안정화제를 질량비율 4~5% 첨가하여 산성화 반응을 억제시킨 단일계 액상추진제(KMP) 형태로 제조하였다. 합성한 추진제는 시차주사열량계(DSC)를 이용하여 분해온도를 측정하여 열안정성을 평가해보았다.

  • PDF