• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.454-459
• /
• 2001

The present study is concerned with the flow patterns induced by other impellers in a rectangular tank Impellers are FBT(Flat blade turbine), PBT(Pitched blade turbine), Shroud turbine, Rushton Turbine, and Helical ribbon turbine. The solution of flows in moving reference frames requires the use of 'moving' cell zone. The moving zone approaches are MRF(Multiple reference frame), which is a steady-state approximation and Sliding method, which is a unsteady-state approximation. Numerical results using two moving zone approaches are compared with experiments by Ranade & Joshi, which have done extensive LDA measurements of the flow generated by a standard six-bladed Rushton turbine in a cylindrical baffled vessel. In this paper we simulated the flow patterns with above mentioned moving zone approaches and impellers. Turbulence model is RNG k-$\epsilon$ model.

• 해양환경안전학회지
• /
• 제30권1호
• /
• pp.108-117
• /
• 2024

본 연구에서는 너클 라인이 다수 존재하면서 안팎 형상이 비대칭으로 설계된 특이점을 갖는 쌍동선의 자항성능을 예측하기 위해 CFD 해석을 수행하였고, 해석 기법에 따른 차이를 파악하기 위해 MRF(Moving Reference Frame) 기법과 SDM(Sliding Mesh) 기법을 적용하였다. MRF 기법을 적용한 경우에는 time step당 프로펠러를 1˚ 회전시켰고, SDM 기법의 경우 10˚, 5˚, 1˚씩 회전시키며 각 기법별 예측된 자항성능을 비교하였다. 자항점 추정을 위한 몇 가지 프로펠러 회전수에서의 해석 결과 중 프로펠러의 토크는 기법에 따른 차이가 거의 없었지만 추력 및 선체가 받는 저항은 MRF 기법보다는 SDM 기법을 적용했을 때 더 낮게, SDM 기법의 time step당 프로펠러 회전각이 작을수록 높게 계산되었다. 선형 내삽을 통해 추정된 자항점의 프로펠러 회전수, 추력, 토크와 실선 확장법을 사용해 추정된 실선의 전달동력, 반류 계수, 추력 감소 계수 및 프로펠러 회전수도 동일한 경향을 보였으며, 대부분의 자항효율은 반대의 경향을 보였다. 프로펠러 후류의 경우 MRF 기법을 적용했을 때 정확도가 떨어졌고, SDM 기법의 time step당 프로펠러 회전각에 따라 표현되는 후류의 차이는 거의 없었다.

• 한국유체기계학회 논문집
• /
• 제5권2호
• /
• pp.29-35
• /
• 2002

The present study is concerned with the flow patterns induced by various impellers in a rectangular tank. Impellers are FBT (Flat blade turbine), PBT (Pitched blade turbine), Shroud turbine, Rushton turbine, and Helical ribbon turbine types. The solutions of flows in moving reference frames require the use of 'moving' cell zone. The moving zone approaches are based on MRF (Multiple reference frame), which is a steady-state approximation and sliding method, which is an unsteady-state approximation. Numerical results using two moving zone approaches we compared with experiments by Ranade & Joshi, which have done extensive LDA measurements of the flow generated by a standard six-bladed Rushton turbine in a cylindrical baffled vessel. In this paper, we simulated the flow patterns with above-mentioned moving zone approaches and impellers. Turbulence model used is RNG $k-{\epsilon}$ model. Sliding-mesh method is more effective than MRF for simulating the rectangular tank with inlet and outlet. RNG $k-{\epsilon}$ model strongly underestimates the velocity of experimental data and velocity by Chen & Kim's model, but it seems to be correctly predicted in overall distribution.

• 한국전산유체공학회지
• /
• 제20권2호
• /
• pp.81-87
• /
• 2015

For Underwater vehicles, Unwanted roll excursions are inevitable as they are caused by induced propeller torque, disturbances, and banking motion during turns. To estimate the manoeuvring performance of underwater vehicle, it is necessary to obtain the roll coefficient of body. This paper was covered estimation of roll coefficient of underwater vehicle using STAR-CCM+, commercial CFD(Computational Fluid Dynamics) code. The RANS equations for incompressible fluid flows was solved numerically by using a finite volume method. An MRF(Moving Reference Frame) Method was Also adopted for rotations of body. For the validation, the flow around a DARPA SUBOFF bare hull model was simulated and good agreement with experiments was obtained. And Pure roll coefficients were calculated and campared with the experimental data which were presented by Seoul National University. Finally, an underwater vehicle model with propeller was simulated and analyzed for estimation of roll coefficient variation caused by induced propeller torque.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권1호
• /
• pp.84-91
• /
• 2010

The centrifugal oil purifier is used in ships for purifying the engine lubrication oil. The momentum needed for the rotation of the cylindrical chamber is obtained by jet injections. The dust particles in the oil are separated by the centrifugal forces moving to the inner wall of the rotating cylindrical chamber body. The dust particles are eliminated when the particles are adsorbed onto the surface of the inner wall of the chamber body. The flow characteristics and the physical behaviours of particles in this centrifugal oil purifier have been investigated numerically and the filtration efficiencies have been evaluated. For the calculations, a commercial code has been used and the SST k-${\omega}$ turbulence model has been adopted. The MRF (Multiple Reference Frame) method has been introduced to consider the rotating effect of the flows. Under various variables, such as particle size, particle density and rotating speed, the filtration efficiencies have been evaluated. It has been verified that the filtration efficiency is increased with the increments of the particle size, the particle density and the rotating speed of the cylindrical chamber.

• 한국항공우주학회지
• /
• 제48권2호
• /
• pp.89-97
• /
• 2020

본 연구에서는 동축반전 프로펠러 설계 파라미터 중 프로펠러 상하 간격이 동축반전 프로펠러 유동에 미치는 영향을 확인하기 위해 ANSYS Fluent 19.0 Solver를 이용하여 26 inch 단일, 동축반전 프로펠러에 대해 수치적 해석을 수행하였다. 단일 프로펠러에 대해 Moving Reference Frame (MRF) 기법을 이용하였으며 동축반전 프로펠러에 대해 방위각에 따라 변하는 유동을 분석하기 위해 Sliding Mesh 기법을 사용하였다. 위, 아래 프로펠러가 서로 반대방향으로 회전하면서 서로 가까워지는 구간에서 추력과 동력이 감소하였다. 프로펠러 상하 간격이 증가하면서 위, 아래 프로펠러의 상호 간섭이 감소하는 것을 관찰하였다. 동축반전 프로펠러 주위 유동장 변수 등고선을 확인한 결과, 프로펠러가 가까워지는 구간에서 발생하는 공력 성능의 변화는 Loading 효과와 동시에 날개 끝 와류후류의 영향으로부터 기인한다.

• 항공우주시스템공학회지
• /
• 제15권2호
• /
• pp.26-35
• /
• 2021

In this study, CFD analysis was conducted to compare the aerodynamic performance of the isolated propeller and pusher propeller, which is affected by the wake of wide fuselage. The moving reference frame (MRF) method was used for isolated propeller analysis, while the MRF and sliding mesh method were used sequentially for the pusher propeller to analyze the change in the aerodynamic characteristics based on the azimuth angle. Under the same torque condition, the thrust of the pusher propeller was greater than that of the isolated propeller. Thrust increment of the pusher propeller was mainly generated near the root of the blade where the fuselage wake was concentrated. The net efficiency of the pusher propeller was greater than or equal to that of the isolated propeller. Because of the flat fuselage shape, thrust and torque of the pusher propeller periodically changed with the rotation of the propeller.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.526-529
• /
• 2008

Air Conditioner has become a popular comfort providing device since two decades, whether in an office or home especially for warm and wet climate countries. The RAC (Room Air Conditioner) is widely used in various working spaces and residences. It composed of heat exchager, cross-flow fan, stabilizer, rearguider and blade of diffuser region, etc. In this study, numerical analyses based on the prediction of transient phenomena were carried out to investigate the flow characteristics in the RAC, including the impeller, the rearguider, the stabilizer and the blade of the diffuser region. Using a commercial code, FLUENT, the velocity, pressure and streamlines were obtained with unsteady, turbulent flow and no-slip condition. The angular velocities of impeller are located in the 900 rpm. Turbulent closure was achieved using a standard k-${\varepsilon}$ model. A moving reference frame (MRF) approach was adopted to simulate the flow field generated by impeller in the RAC. Results were graphically depicted with various geometrical configurations and operating conditions.

• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2016년)
• /
• pp.15-18
• /
• 2016

본 연구는 조류발전 터빈의 블레이드 형상 최적화 해석 시스템 개발에 대한 사전연구의 일환으로 EDISON CFD의 프로펠러 단독성능 S/W와 SNUFOAM ShipMesh Advanced 자동격자생성기를 이용하여 조류발전 터빈 주위 유동장에 대한 수치해석을 수행하였다. TSR 조건 변화에 따라 수치해석을 수행하고 이에 대한 power, total coefficient를 동일한 조건에서 수행된 실험결과와 비교 검증하여 해석자의 신뢰도를 확인하였다. 또한, 블레이드 전체를 모델링한 full body 해석과 하나의 블레이드만을 모델링한 single body 해석 결과를 비교하여 경제적이면서 정도 높은 터빈 성능해석 프로세스를 제안하였다. 조류발전 터빈의 TSR 조건 변화에 따라 낮은 TSR 조건에서는 국부적 와동발생에 의해 $C_P$가 감소하는 것을 확인하였고 설계 TSR에서 가장 좋은 효율을 보임을 확인하였다. 이를 통해 suction side의 압력 분포, 팁 와동의 강도 등 성능개선을 위한 주요한 설계변수를 식별하였다.