• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.5
• /
• pp.320-333
• /
• 2019

In this study, a physics-based 3D morphology model for the estimation of an erosion rate of nourished beach is newly proposed. As a hydrodynamic module, IHFOAM toolbox having its roots on the OpenFoam is used. On the other hand, the morphology model comprised a transport equation for suspended sediment, and Exner type equation derived from the viewpoint of sediment budget with the bed load being taken to accounted. In doing so, the incipient motion of sediment is determined based on the Shields Diagram, while the bottom suspended sediment concentration, the bed load transport rate is figured out using the bottom shearing stress directly calculated from the numerically simulated flow field rather than the conventional quadratic law and frictional coefficient. In order to verify the proposed morphology model, we numerically simulate the nonlinear shoaling, breaking over the uniform beach of 1/m slope, and its ensuing morphology change. Numerical results show that the partially skewed, and asymmetric bottom shearing stresses can be successfully simulated. It was shown that sediments suspended and eroded at the foreshore by wave breaking are gradually drifted toward a shore and accumulated in the process of up-rush, which eventually leads to the formation of swash bar. It is also worth mentioning that the breaker bar formed by the sediments dragged by the back-wash flow which commences at the pinnacle of up-rush as the back-wash flow gets weakened due to the increased depth was successfully duplicated in the numerical simulation.

• Macromolecular Research
• /
• v.9 no.4
• /
• pp.238-246
• /
• 2001

Properties of ternary blends of nylon 6 (Ny6), a thermotropic liquid crystalline polymer (TLCP, poly(ester amide), 20 wt%) and a maleic anhydride grafted polypropylene (2 wt%) (MAPP) were studied under various processing conditions. TLCP was pre-blended with MAPP first and then the binary one blended again with Ny6. The processing temperature of the second mixing was varied. Thermal properties show the partial miscibility of the ternary blend. The morphology of the TLCP phase in the first blending shows mostly in the fibril bundle shape, but varies between droplets and oriented fibrils after the second processing. Some of TLCP phase lost the fibril morphology during the second processing stage. The morphology variation invokes the change in tensile properties. Low extrusion temperature (270$\^{C}$) provides more fibril shapes, which are associated with less deformation in the second stage. The processing temperature effect was more evident when the draw ratio was high. High drawing was applicable due to the stabilizing action of tile compatibilizer.

• 한국연소학회:학술대회논문집
• /
• 1997.06a
• /
• pp.61-68
• /
• 1997

The morphology and size distribution of chromium oxides and the concentration measurement of atomic arsenic have been studied in laminar diffusion flames. Nitrogen was added to vary flame temperatures in hydrogen flames. Ethene flames were used in order to investigate the potential for interaction between the soot aerosol that is formed in these flames and the chromium aerosol. Two sources of chromium compounds were introduced: chromium nitrate and chromium hexacarbonyl. A detailed investigation of the morphology was carried out by scanning electron microscopy (SEM). The amounts of Cr(VI) and total Cr were determined by a spectrophotometric method and by X-ray fluorescence spectrometry, respectively. Also, LIF was used for the measurement of atomic arsenic, which was excited at 197.2 nm and was detected at 249.6 nm. Results showed that the morphology of the particles varied with the flame temperature and with the chromium source. The particles were characterized by porous structures, cenospheres and agglomerated dense particles when chromium nitrate solution was added to the flames. At low to moderate temperatures, porous sintered cenospheric structures were formed, in some cases with a blow hole. At higher temperatures, an agglomerated cluster which was composed of loosely sintered submicron particles was observed. It was also found that the emission of Cr(VI) from the undiluted $H_2$ flame was more than 10 times larger than in the 50% $H_2$ / 50% $N_2$ flame on a mass basis. Single point LIF measurement of atomic arsenic indicated that arsenic exist only in the low temperature, fuel rich region.

• Journal of Evidence-Based Herbal Medicine
• /
• v.2 no.1
• /
• pp.25-31
• /
• 2009

The origin and description of the Herba Plantaginis was contemporarily analyzed (family names, scientific names, target regions, preparation, etc.) by comparison to enormous literature in addition to the external features written in the existing books on traditional Korean medicine. Also, galenical description were analyzed in connection with external morphology, internal morphology, microscopy and five senses. The official documents and ancient documents of other countries were reviewed. The technical books on herbage, published in the country and other countries, were compared with each other. Also, on-the-spot surveys were made to learn specialists' know-how. The description of the collected drugstuffs were analyzed in connection with external morphology (size, color, etc.), internal morphology and microscopy. The results of this study can be applied to the publicity and education of galenical test agencies; the effective management of foods and drugs; the improvement of public medical service; the publicity of galenical safety.

• The Plant Pathology Journal
• /
• v.21 no.2
• /
• pp.137-141
• /
• 2005

The effect of cotton leaf mosaic disease on morphology, yield and fibre characteristics was examined for a susceptible cotton candidate variety CRIS-168. Plants inoculated at most susceptible growth stage (six week) under screen house showed severe mosaic symptoms. There was a significant reduction in plant height and yield. Cotton leaf mosaic disease was found to produce severe effects on plant morphology with 24.1% reduction in plant height, 25% in internode length and 37.5% in number of sympodia on main stem. However no changes were observed against number of monopodial branches per plant. Inoculated plants showed 82% decrease in yield/plant, 80% in number of boll set/ plant, 12.1% in boll weight, 12.8% in lint weight, 10.8% in seed weight, and 6.8% in seed index. Cotton leaf mosaic disease also showed effects on fibre characteristics with 0.8% decrease in GOT and 1.6% in fibre length. In contrast, uniformity ratio, fibre fineness and maturity index was increased by 20.5%, 14.4% and 0.9%, respectively.

• ALGAE
• /
• v.26 no.3
• /
• pp.243-251
• /
• 2011

Environmental conditions can influence the morphology of local biota through phenotypic plasticity or local adaptation. Macroalgal morphologies are often associated with wave-exposure conditions. We investigated the relationship between morphology and wave exposure in two common endemic subtidal macroalgae, Carpophyllum angustifolium and C. maschalocarpum, from the East Cape of New Zealand. Morphological comparisons were made between individuals from two sites and four different wave-exposure zones, as defined by fetch and barnacle composition. Of the seven morphological traits measured in C. angustifolium, only total length varied, and individuals were longer in more wave-exposed environments between the two exposure zones where the species were found. In contrast, total length, stipe thickness and vesicle presence all varied significantly between exposure zones in C. maschalocarpum. C. maschalocarpum specimens were shorter with thinner stipes, and fewer individuals had vesicles in the more wave-exposed zones. Morphological traits of both species also varied between sites, suggesting that other influences are important for determining species morphology. Further study is needed to investigate the role of phenotypic plasticity and genetic variability for driving morphological variation in C. angustifolium and C. maschalocarpum.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.11
• /
• pp.1673-1679
• /
• 2003

Two hundred forty 1-d-old Arbor Acres broiler chicks were used to investigate the effects of Cu (II)-exchanged montmorillonite (CEM) or montmorillonite on the growth performance, intestinal microflora, bacterial enzyme activities and morphology of broilers. The chicks were assigned randomly into three groups with 80 chicks per treatment. The three dietary treatments were basal diet only (control group), basal diet +1 g $kg^{-1}$ montmorillonite, and basal diet +1 g $kg^{-1}$ CEM. The results showed that the addition of CEM to the diet increased significantly the body weight and feed efficiency, but a similarly significant increase was not found in broilers fed the diet containing montmorillonite. Supplementing the CEM in the diet of broilers also decreased the numbers of Clostridium perfringens and Escherichia coli in the small intestine and cecum. The addition of either CEM or montmorillonite to the diet depressed the activities of $\beta$-glucosidase and $\beta$-glucuronidase in the small intestinal and cecal contents. Data of villus height and crypt depth for duodenum, jejunum and ileum indicated that dietary addition of CEM or montmorillonite improved the small intestinal mucosal morphology.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.4
• /
• pp.548-553
• /
• 1999

An experiment was conducted to study the effects of high dietary copper supplementation on the gastrointestinal tract morphology of broiler chickens. Eighty 3-week-old broiler chicks were divided randomly into eight groups of four dietary treatments and over three week were fed isoenergetic and isonitrogenous diets that contained 0, 100, 250, or 500 mg/kg of supplemental copper from cupric sulfate. The copper supplementation in the broiler diet up to 250 mg/kg did not significantly influence broilers' performance. A high dietary copper supplementation of 500 mg/kg did significantly depress growth and feed conversion in the broilers (p<0.05). Copper supplementation more than 250 mg/kg in the broiler diet significantly influenced the morphology of the GI tract, as shown by severe oral lesions and gizzard erosion. It also significantly depressed the villi height and significantly thickened the muscular layer in the duodenum (p<0.05). The severely damaged villi were observed by scanning electronic microscope from the duodenum samples of broilers fed a 500 mg/kg copper supplemented diet. The 500 mg/kg copper supplemented diet also significantly influenced the plasma constituents. Plasma glucose concentration was significantly depressed (p<0.05).

• The korean journal of orthodontics
• /
• v.20 no.1
• /
• pp.135-156
• /
• 1990

This study was undertaken to investigate the difference of chin morphology and mandibular form in relation to different mandibular growth direction. The subject was divided into three group i.e., control group, vertical group, and horizontal group, according to the criteria of $Bj{\ddot{o}}rk$ sum, and each group was composed of 15 females and 15 males. Medial axis analysis in addition to the routine cephalometric analysis using P.I.A.S. (personal image analysing system) was carried out to find out the differences of mandibular morphology on each group. The results were as follows: 1. The area of symphysis was larger in horizontal growth group than that of vertical growth group. 2. Protruding chin area was also larger in horizontal growth group than that of vertical growth group. 3. There was a close correlationship between protruding chin area and other form of mandible. 4. Antegonial notch depth and ramus posterior contour depth was deeper in vertical growth group than in horizontal growth group, and antegonial notch depth was more influenced by anterior part of notch than posterior part of notch. 5. Mental medial axis and incisal medial axis length, in relation to corpus medial axis length was larger in vertical growth group than in horizontal growth group.

• Korean Journal of Crystallography
• /
• v.5 no.2
• /
• pp.93-99
• /
• 1994

Growth form and surface morphology of NYAB single crystal grown by TSSG technique using a K2O/3MoOS/0.5B203 flux was investigated. In the crystal grown from <100> or <120> seed, prismatic and (101) faces were well developed with different size each other. (001) face was also developed in the crystal grown from <001> seed. While growth hillocks were observed on the prismatic face of the crystal grown from <100> seed, surface striations parallel to neighbor (101) faces were formed on that face of the crystal grown from <001> seed. The (101) faces were grown by two dimensional nucleation growth. (001) face which was developed at slow growth velocity of [001] direction was grown by screw dislocation Anisotropy of growth velocity as to seed orientation affected on crystal morphology and surface morphology.