• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.3
• /
• pp.205-210
• /
• 2000

Lead titanate thin films were fabricated on Si(100) wafer and ITO-coated glass substrates by metal organic chemical vapor deposition using ultrasonic spraying. When the ratio (Ti/Pb) of starting materials was 1.2, the films deposited on Si wafer had a single perovskite phase. The films deposited on ITO-coated glass had higher growth rate than that on Si wafer. As deposition temperature was increased from $530^{\circ}C$ to $570^{\circ}C$, dielectric constant was increased due to the increase of crystallinity and grain size. At $570^{\circ}C$, dielectric constant and dielectric loss of the films were 205 and 0.016, respectively. When the deposition temperature is higher than $600^{\circ}C$, dielectric constant was decreased.

• Korean Journal of Materials Research
• /
• v.2 no.1
• /
• pp.43-51
• /
• 1992

Thin films of )$Pb(Zr, \;TiO_3$ are fabricated by MOCVD using ultrasonic spraying. The films having perovskite structure are made at low deposition temperature, $300-450^{\circ}C$. The phase and composition of the films vary with the composition of the starting solution and the deposition temperature. Dielectric constant of the films is 187 at 1MHz. Ferroelectric hysterysis loop measurements indicate a remanant polarization of $5.5{\mu}C/cm^2$, and coercive field of 65kV/cm. Resistivity of thin films is about $10^{11}{\Omega}cm$ and the breakdown electric field abort 35kV/cm.

• Korean Journal of Materials Research
• /
• v.6 no.5
• /
• pp.475-482
• /
• 1996

초음파분무를 이용한 MOCVD법으로 강유전 BaTiO3 박막을 제조하였다. 초음파 분무 MOCVD법은 비교적 저온에서도 후열처리없이 결정화된 박막의 제조가 가능하다. 증착한 박막은 기판온도가 증가할수록 (110) 우선 배향성을 가졌으며, 기판온도에 따라서 서로 다른 결정상을 나타내었다. 기판온도가 55$0^{\circ}C$인 경우에 증착한 박막은 결정화가 완전히 진행되지 않았으며, 결정립의 크기도 매우 작아 상온에서 입방정상의 특성을 보였다. $600^{\circ}C$에서 증착한 박막은 결정화가 진행되어 입자의 크기는 성장하였으나 의사 입방정상을유지하고 있었다. 반만 $650^{\circ}C$에서 증착한 박막은 결정화뿐만 아니라 주상으로 성장하여 수직 방향으로는 박막 두께의 크기를 가져 CV 특성에서 이력곡선을 보였으며, 정전용량의 온도 변화에 따른 특성에서도 상전이의 특성을 나타내었다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.3
• /
• pp.111-114
• /
• 2001

(Ba,Sr) $RuO_3$ thin films were fabricated on Si(100) wafer by metal organic chemical vapor deposition using ultrasonic spraying. When the substrate temperature was varied, the BSR thin films showed good crystallinity above 50$0^{\circ}C$ and showed (110) preferred orientation by X-ray diffraction measurements. The surface morphology, determined by atomic force microscopy, indicated that the grain size of BSR thin films depended strongly on the Ba/Sr ratio. With the increase in the amount of Sr relative to Ba, the resistivity of BSR films decreased fro m415 to 261 $\mu$$\Omega$${\cdot}$cm.