• 한국세라믹학회지
• /
• 제33권11호
• /
• pp.1209-1216
• /
• 1996

MoSi2-Al2O3 composites were prepared by thermal explosion mode of self-propagating high temperature syn-thesis (SHS) using element powders of MoO3 Mo Si and Al. The combustion products of MoSi2 which have 10, 20, 30 and 40 wt% Al2O3 showed the molten state in the range of Mo to MoO3 6:1-9.5:1, 2:1-8:1, 1:1-5:1, and 1:1-3:1 (molar ratio) respectively. The combustion products which made least seperation the molten phase from the slag phase were in Mo/MoO3=9, 5:1, 8:1, 5:1 and 3:1 (molar ratio) respectively. Particles size of MoSi2 and Al2O3 in the combustion product were decreased as the molar ratio of Mo to MoO3 increase. By XRD analysis only MoSi2 and $\alpha$-Al2O3 peaks were identified in the combusion products, In case of MoSi2 containing 20wt% Al2O3 5.1wt% Al existed into MoSi2 grains and 30.7wt% Si and 7.7wt% Mo existed into Al2O3 grains. The relative density of MoSi2 containing 10, 20, 30 and 40 wt% Al2O3 were 82.7, 85.2, and 81.9% respectively. The fracture strength of MoSi2-Al2O3 composites increased with increasing Al2O3 and that of MoSi2-20wt% Al2O3 composite was 195 MPa.

• International Journal of Ocean System Engineering
• /
• 제2권4호
• /
• pp.244-249
• /
• 2012

In this study, a monolithic MoSi2 matrix reinforced with 20 vol% SiC particles, a SiC/MoSi2 composite matrix reinforced with 20 vol% ZrO2 particles, and a ZrO2/MoSi2 composite were fabricated using hot press sintering at $1350^{\circ}C$ for 1 h under a pressure of 30 MPa. The Vickers hardness and sliding wear resistance of the monolithic MoSi2, ZrO2/MoSi2, and SiC/MoSi2 composite were investigated at room temperature. A wear behavior test was carried out using a disk-type wear tester with a silicon nitride ball. The ZrO2/MoSi2 composite showed an average Vickers hardness value and excellent wear resistance compared with the monolithic MoSi2 and SiC/MoSi2 composite at room temperature.

• 한국세라믹학회지
• /
• 제32권9호
• /
• pp.1085-1091
• /
• 1995

Molybdenum disilicide (MoSi2) was synthesized from Mo, MoO3, Si and Al powders by self-propagating high temperature synthesis (SHS). The effect of processing parameters such as Mo/MoO3 molar ratio, Ar gas pressure in the reactor and pressing pressure of compacts in synthesis of MoSi2 were investigated. h-MoSi2 was transformed into t-MoSi2 with increasing the Mo/MoO3 mole ratio, and only t-MoSi2 phase was identified above 3.5 : 1 (molar ratio). The synthesized phases did not change with the variation of Ar gas pressure and pressing pressure of compacts. It was found that the combustion temperature was above 2,50$0^{\circ}C$. The products were separated into MoSi2 (s) and $\alpha$-Al2O3 by the difference of their specific grativities. Bending strength, hardness and density of sintered specimen exhibited 82 MPa, 5.368 GPa and 5.43 g/㎤, respectively.

• 공업화학
• /
• 제10권2호
• /
• pp.231-236
• /
• 1999

결정상과 분산도가 조절된 $MoO_3$/$SiO_2$ 담지촉매를 제조하여 촉매의 표면특성과 디벤조티오펜 탈황반응의 활성도를 고찰하였다. Mo의 표면담지량은 4 atoms $Mo/nm^2$이었으며, 실리카 표면 위에 형성된 $MoO_3$의 결정상은 sintered hexagonal, sintered orthorhombic, 및 dispersed hexagonal상이었다. XRD, Raman, 및 $O_2$ 흡착 결과 $MoO_3$의 표면분산도는 sintered hexagonal < sintered orthorhombic < dispersed hexagonal 순으로 증가하였다. TPR 결과 $MoO_3$ 결정은 $650^{\circ}C$에서 $MoO_2$로, $1000^{\circ}C$에서 Mo로 환원됨을 알 수 있었다. 디벤조티오펜 탈황반응을 30기압, $350{\sim}500^{\circ}C$ 온도범위에서 수행하였으며, 실험 결과 활성도는 $MoO_3$ 결정체의 $SiO_2$ 표면에서의 분산도에 비례하여 증가함을 알 수 있었다.

• 한국세라믹학회지
• /
• 제48권6호
• /
• pp.559-564
• /
• 2011

In order to investigate the behavior of $SiO_2$ in the molybdenum silicide powders, crystal structure of these powders was measured by XRD, in addition, surface composition and surface phase (or chemical states) and microstructure were analysed by XPS and TEM, respectively. Mo-silicide powders containing $SiO_2$ were synthesized by SHS (Self-Propagating High-Temperature Synthesis) technique. In XRD result, according to increase of $SiO_2$ contents, the crystal structure for synthesized $MoSi_2$ powders was still typical $MoSi_2$ bct without any other phases. By XPS analysis, the surface of Mo and Si source powders was covered with $MoO_3$ and $SiO_2$, respectively, and the surface of synthesized $MoSi_2$ powder was also covered with $MoO_3$ and $SiO_2$, which were stable oxides at room temperature. However, according to increase of $SiO_2$ addition, $MoSi_2$ phase in XPS spectra decreased and $SiO_2$ phase increased relatively in synthesized $MoSi_2$ powders. From the results by XPS and XRD, we found that the existent $SiO_2$ has amorphous structure. In the microstructure, the small particulates of the synthesized products added $SiO_2$ agglomerated together to form larger clusters (from ~10 nm to ~1 ${\mu}m$). From TEM, XPS, and XRD results, we found that the out layer of agglomeration of synthesized $MoSi_2$ powder is surrounded by amorphous $SiO_2$.

• 대한기계학회논문집A
• /
• 제27권7호
• /
• pp.1132-1137
• /
• 2003

This study dealt with the suppression of interfacial reaction between Nb and MoSi$_2$ for the fabrication of high toughness Nb/MoSi$_2$ laminate composites, based on the results of a thermodynamical estimation. Especially, the effect of ZrO$_2$ particle on the interfacial reaction of Nb/MoSi$_2$ bonding materials has been examined. Nb/MoSi$_2$ bonding materials have been successfully fabricated by alternatively stacking matrix mixtures and Nb sheets and hot pressing in the graphite mould. The addition of ZrO$_2$ particle to MoSi$_2$ matrix is obviously effective for promoting both the interfacial reaction suppression and the sintered density of Nb/MoSi$_2$ bonding materials, since it is caused by the formation of ZrSiO$_4$ in the MoSi$_2$-ZrO$_2$ matrix mixture. The interfacial shear strength of Nb/MoSi$_2$ bonding materials also decreases with the reduction of interfacial reaction layer associated with the content of ZrO$_2$ particle and the fabrication temperature.

• Journal of Mechanical Science and Technology
• /
• 제14권8호
• /
• pp.830-835
• /
• 2000

The thermodynamical estimation of the interfacial reaction and the impact properties of $Nb/MoSi_2$ laminate composites containing SiC, $NbSi_2$ or $ZrO_2$ particles are investigated. Laminate composites, which comprise alternating layers of $MoSi_2$ with the particle and Nb foil, were fabricated by the hot press process. It is clearly found out that the interfacial reaction of $Nb/MoSi_2$ can be controlled by the addition of $ZrO_2$ particle to the $MoSi_2$ phase. The addition of $ZrO_2$ particle increases both the impact value and the sintered density of Nb/McSij, The suppression of the interfacial reaction is caused by the formation of $ZrSiO_2$ in $MoSi_2-ZrO_2$ matrix mixture.

• 한국진공학회지
• /
• 제9권3호
• /
• pp.263-266
• /
• 2000

본 논문에서는 낮은 구동 전압에서 동작하고 안정된 on/off 상태를 갖는 Al/$TiO_2-SiO_2$/Mo 형태의 안티퓨즈를 제작하였다. 하부전극으로 사용된 Mo 금속은 표면상태가 부드럽고 녹는점이 높은 매우 안정된 금속으로, 표면 위에 제조된 $SiO_2$ 특성을 매우 안정되게 유지시켰다. 또한 $TiO_2$절연막을 $SiO_2$절연막 위에 복층 구조로 증착하여, Ti 금속의 침투로 인한 $SiO_2$ 절연막의 약화로 동일 두께(100 $\AA$)의 $SiO_2$, 단일막에 비하여 향상된 절연파괴 전압을 얻을 수 있었다. $TiO_2-SiO_2$ 이중절연막을 사용하여 적정 절연파괴전압 및 ON-저항을 구현하였으며, 두께가 두꺼워짐으로 인해 바닥금속의 거칠기의 영향을 최소화시킬 수 있었다. 이중 절연막의 두께는 250 $\AA$이고 프로그래밍 전압은 9.0 V이고 약 65 $\Omega$의 on 저항을 얻을 수 있었다.

• 공업화학
• /
• 제7권5호
• /
• pp.861-868
• /
• 1996

n-butene의 i-butene으로의 골격 이성질화 반응은 발열반응으로서 열역학적으로 저온($100^{\circ}C{\sim}150^{\circ}C$)에서 최고수율을 나타내며 반응 mechanism은 carbonium ion의 형성과 methyl기의 골격치환에 따른 2step으로 규정된다. 산처리되어 강산점을 가지는 zeolite, alumina와 비교하여, $Pt/MoO_3/SiO_2$ 촉매 사용시 $110^{\circ}C$ 등온 환원반응 실험으로 설명되는 Proton의 증가된 표면 이동 속도는 골격 이성질화 반응시 carbonium ion의 형성을 빠르게 촉진시킬 수 있으며, 이에 따라 $110^{\circ}C$에서 1-butene의 수율은 최대치로 나타나며 부산물은 생성되지 않는다. $110^{\circ}C$에서의 등온 환원반응에서 $Pt/MoO_3/SiO_2$가 $Pt/MoO_3/Al_2O_3$보다 높은 proton spillover 속도를 보이지만 약 90분 경과한 $MoO_3$ 표면의 proton 포화상태에서는 i-butene의 반응수율이 같고, $MoO_3$가 없는 zeolite, $Pt/SiO_2$보다 높은 전환율을 보이므로 proton spillover에 의한 carbonium ion의 생성이 반응속도를 조절하는 것으로 나타난다. $Pt/MoO_3/SiO_2$에서 산점의 증가, Pt 및 $MoO_3$ 함량의 증감은 i-butene 수율에 영향을 미치지 않으며, 이는 proton spillover에 의한 Pt 표면위의 carbonium ion의 형성이 속도 결정 단계이기 때문인 것으로 사료된다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.29-34
• /
• 2002

[ $Nb/MoSi_2-ZrO_2$ ] laminate composites have been successfully fabricated by alternately stacking $MoSi_2-ZrO_2$ powder layer and Nb sheet, followed by hot pressing in a graphite mould. The fabricating parameters were selected as hot press temperatures. The instrumented Charpy impact test was carried out at the room temperature in order to investigate the relationship between impact properties and fabricating temperatures. The interfacial shear strength between $MoSi_2-ZrO_2$ and Nb, which is associated with the fabricating temperature and the growth of interfacial reaction layer, is also discussed. The plastic deformation of Nb sheet and the interfacial delamination were macroscopically observed. The $Nb/MoSi_2-ZrO_2$ laminate composites had the maximum impact value when fabricated at 1623K, accompanying the increase of fracture displacement and crack propagation energy. The interfacial shear strength of $Nb/MoSi_2-ZrO_2$ laminate composites increased with the growth of interfacial reaction layer, which resulted from the increase of fabricating temperature. there is an appropriate interfacial shear strength for the enhancement of impact value of $Nb/MoSi_2-ZrO_2$ laminate composites. A large increase of interfacial shear strength restrains the plastic deformation of Nb sheet.