• 한국재료학회지
• /
• 제9권9호
• /
• pp.937-942
• /
• 1999

Fe계 합금의 적층결함에너지를 감소시키는 것으로 알려진 Mn이 Fe-20Cr-1C-Si 경면처리 합금의 변형유기 상변태거동과 상온 및 고온 마모저항성에 미치는 영향에 대하여 조사하였다. 15ksi의 접촉응력에 대하여 0~25wt.% Mn을 첨가한 시편은 모두 상온에서 마모손실량이 적은 우수한 마모저항성을 보였는데 Mn 첨가량이 5wt.% 이하인 시편의 경우 마모표면에서 ${\gamma}$$\longrightarrow$$\alpha$\`변형유기 상변태가 발생한 반면 15wt.% 이상 Mn을 첨가한 시편에서는 ${\gamma}$$\longrightarrow$$\varepsilon$변형유기 상변태가 발생하는 것으로 나타났다. 25$0^{\circ}C$까지 고온 마모시험결과 ${\gamma}$$\longrightarrow$$\alpha$\`변형유기 상변태가 발생한 5wt.% 이하 Mn 첨가시편은 Mn 첨가량이 증가할수록 마모손실량이 증가하는 것으로 보아 Mn 첨가는 ${\gamma}$$\longrightarrow$$\alpha$\`변형유기 상변태에 있어서 고온 마모저항성을 저하시키는 것으로 생각되며 이는 Mn이 ${\gamma}$$\longrightarrow$$\alpha$\`변형유기 상변태의 M(sub)d 온도를 감소시키기 때문으로 생각된다. 반면에 ${\gamma}$$\longrightarrow$$\varepsilon$변형유기 상변태가 일어난 15wt.% 이상 Mn 첨가 시편의 경우 Mn 첨가량 증가에 따른 고온 마모손실량의 차이가 없는 것으로 보아 ${\gamma}$$\longrightarrow$$\varepsilon$변형유기 상변태는 ${\gamma}$$\longrightarrow$$\alpha$\`변형유기 상변태에 비해 온도의 존성이 적은 것으로 생각된다.

• 한국환경보건학회지
• /
• 제14권1호
• /
• pp.73-86
• /
• 1988

In order to determine the content levels of trace metals in common salts, 64 bay salt samples were collected from three producing districts and 33 bay salt samples, 32 remade salt samples and 5 fine salt samples were collected from 7 major cities in Korea, from August to September 1987. These were analysed for content levels of Pb, Cd, Cu, Zn and Mn using Atomic Absorption Spectrophotometer. The results were as follows: 1. Lead contents in three type salts were N.D. - 1081.9 $\mu$g/kg and fourteen percent of the 114 samples exceeded the World Health Organization(WHO) criteria of 100$\mu$g/kg. Cadmium contents of samples were N.D.- 382C.5 $\mu$g/kg and five percent of the 114 samples were over the Spanish criteria of 500 $\mu$g/kg. Copper contents of samples were 8,9-214.9 $\mu$g/kg and there was not a sample over the World Health Organization(WHO) criteria of 500 $\mu$g/kg. Zinc contents ranged N.D. - 342.9 $\mu$g/kg and Manganese contents ranged N.D.- 8.31 mg/kg. 2. The comparison of heavy metal contents among the bay salts from three producing districts was significantly different in Pb, Cd and Cu contents. 3. The comparison of heavy metal contents between the bay salts and remade salts was not significantly different in Pb, Cd and Cu contents. 4. The contents of Pb, Cd, Zn and Mn in fine salts were much lower than those of bay salts and remade salts.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.442-445
• /
• 2001

In this study, microstructural and dielectric properties of $Pb_{0.83}(La_{0.2}Ce_{0.8})_{0.08}TiO_3$(PCT) ceramics as a function of $MnO_2$ addition were investigated for 30MHz ceramic resonator application. Grain size was gradually increased according to the increase of $MnO_2$ addition amount and showed the highest value of $1.502{\mu}m$ at the 0.9wt% $MnO_2$. Moreover, density showed the highest value of $7.582 g/cm^3$ at the 0.7wt% $MnO_2$.All the composition ceramics,curie temperature was nearly constant around $330^{\circ}C$

• Journal of Microbiology and Biotechnology
• /
• 제26권11호
• /
• pp.1881-1890
• /
• 2016

Manganese superoxide dismutase (MnSOD) is a vital enzyme that protects cells from free radicals through eliminating superoxide radicals ($O^{2-}$). Hirudin, a kind of small active peptide molecule, is one of the strongest anticoagulants that can effectively cure thrombus diseases. In this study, we fused Hirudin to the C terminus of human MnSOD with the GGGGS linker to generate a novel dual-feature fusion protein, denoted as hMnSOD-Hirudin. The hMnSOD-Hirudin gene fragment was cloned into the pET15b (SmaI, CIAP) vector, forming a recombinant pET15b-hMnSOD-Hirudin plasmid, and then was transferred into Escherichia coli strain Rosetta-gami for expression. SDS-PAGE was used to detect the fusion protein, which was expected to be about 30 kDa upon IPTG induction. Furthermore, the hMnSOD-Hirudin protein was heavily detected as a soluble form in the supernatant. The purification rate observed after Ni NTA affinity chromatography was above 95%. The hMnSOD-Hirudin protein yield reached 67.25 mg per liter of bacterial culture. The identity of the purified protein was confirmed by western blotting. The hMnSOD-Hirudin protein activity assay evinced that the antioxidation activity of the hMnSOD-Hirudin protein obtained was $2,444.0{\pm}96.0U/mg$, and the anticoagulant activity of the hMnSOD-Hirudin protein was $599.0{\pm}35.0ATU/mg$. In addition, in vitro bioactivity assay showed that the hMnSOD-Hirudin protein had no or little cytotoxicity in H9c2, HK-2, and H9 (human $CD_4{^+}$, T cell) cell lines. Transwell migration assay and invasion assay showed that the hMnSOD-Hirudin protein could suppress human lung cancer 95-D cell metastasis and invasion in vitro.

• 한국세라믹학회지
• /
• 제38권1호
• /
• pp.45-51
• /
• 2001

고체산화물 연료전지의 삼상 계면의 길이를 증가시키기 위해 Glycine-Nitrate Process(GNP)를 이용하여 환원극 재료인 L $a_{0.5}$S $r_{0.5}$Mn $O_3$(LSM)과 전해질 재료인 C $e_{0.8}$G $d_{0.2}$ $O_{1.9}$(CGO)를 합성하였다. 적당한 합성조건을 찾기 위하여 글리신의 양을 달리하여 분말을 합성한 결과 LSM의 경우 글리신이 양이온 몰수의 2배일 때 perovskite상이 얻어졌으며 비표면적은 34$m^2$/g 이었다. 합성된 LSM과 CGO 분말을 50:50 wt%로 혼합하여 제작된 환원극을 screen-printing법으로 코팅한 후 각각 1200, 1300, 1350 및 140$0^{\circ}C$에서 4시간 동안 소결한 후 80$0^{\circ}C$에서 power density와 양극과전압 등을 측정한 결과 130$0^{\circ}C$에서 소결한 단위전지에서 최대 309 mW/$ extrm{cm}^2$의 power density를 얻을 수 있었다.다.

• 소성∙가공
• /
• 제15권2호
• /
• pp.112-117
• /
• 2006

Sliding wear mechanism of a high nitrogen austenitic 18Cr-18Mn-2Mo-0.9N steel has been investigated. Dry sliding wear tests of the steel were carried out at various loads of IN-10N under a constant sliding speed condition of 0.15m/s against AISI 52100 bearing steel balls. Solution ($1050^{\circ}C$) and isothermal aging ($900^{\circ}C$) heat treatments were performed on the steel and the effect of the heat treatments on the wear was investigated. Wear rates of the solution-treated steel specimen remained low until 5N load, and then increased abruptly at loads above 5N. The rates of isothermally aged specimens were low and increased gradually with the applied load. Worn surfaces, their cross sections, and wear debris of the steel specimens were examined with a scanning electron microscopy. Phases of the heat-treated specimen and the wear debris were identified using XRD. The transformed phase underneath a sliding track was investigated and analyzed using a TEM. Effects of the phase transformation during the wear and $Cr_{2}N$ precipitates formed during the isothermal aging on the wear of the austenitic steel were discussed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.105-108
• /
• 2005

Sliding wear mechanism of a high nitrogen austenitic 18Cr-18Mn-2Mo-0.9N steel has been investigated. Dry sliding wear tests of the steel were carried out at various loads of 1N-10N under a constant sliding speed condition of 0.15m/s against AISI 52100 bearing steel balls. Solution $(1050^{\circ}C)$ and isothermal aging $(900^{\circ}C)$ heat treatments were performed on the steel and the effect of the heat treatments on the wear were investigated. Wear rates of the solution-treated steel specimen remained low until 5N, and then increased abruptly at loads above 5N. The rates of isothermally aged specimens were low and increased gradually with the applied load. Worn surfaces, their cross sections, and wear debris of the steel specimens were examined with a scanning electron microscopy. Phases of the heat-treated specimen and the wear debris were identified using XRD. Phases transformed underneath the sliding track during the wear were investigated and analyzed using TEM. Effects of the phase transformation during the wear and $Cr_2N$ precipitates formed during the isothermal aging on the wear of the austenitic steel were discussed.

• Journal of Electrochemical Science and Technology
• /
• 제13권1호
• /
• pp.128-137
• /
• 2022

For this study, the sol gel method was used to synthesize the spinel LiNi_0.5Mn_1.5O₄ (LNMO) electrode material. Structural, morphological, electrochemical, and kinetic aspects of the LNMO have been characterized. The synthesized LNMO was indexed with the Fd3m cubic space group. The excellent capacity retention indicates that the spinel framework of LNMO has the ability to withstand high rate charge-discharge throughout long cycle tests. The Li diffusion coefficient (D_Li) changes non-monotonically across three orders of magnitude, from 10^-9 to 10^-12 cm² s^-1 determined from GITT method. The variation of D_Li seemed to be related to three oxidation reactions that happened throughout the charging process. A small dip in D_Li at the beginning stage of Li deintercalation is correlated with the oxidation of Mn³⁺ to Mn⁴⁺. While two pronounced D_Li minima at 4.7 V and 4.75 V are due to the oxidation of Ni²⁺/Ni³⁺ and Ni³⁺/Ni⁴⁺ respectively. The depletion of D_Li at the high voltage region is attributed to the occurrence of two successive phase transformation phenomena.

• 한국자기학회지
• /
• 제14권6호
• /
• pp.228-231
• /
• 2004

Ta(5 nm)/NiFe(11 nm)/FeMn(16 nm) Ta(5 nm)과 Ta(5 nm)/NiFe(11 run)/FeMn(16 nm)/NiFe(7 nm)/Ta(5 nm) 다층박막구조를 제작하여, Laser의 power, 조사 위치, 자장의 방향에 따라 자기저항(MR)비와 교환결합력(H$_{ex}$) 자기적 특성을 연구하였다. Laser 열처리는 power를 440 mW까지 증가시키면서 FeMn/NiFe 이중박막을 15분 씩 Laser로 조사하여, 200 mW에서부터 음의 자기장에서 자기저항곡선의 피크가 발생하기 시작하였다. 400 mW까지 증가시키면서 양의 자기장에서 자기저항곡선의 MR비와 H$_{ex}$:가 각각 0.9%에서 0.1%로, 87 Oe에서 76 Oe로 감소하였고, 음의 자기장 피크에서는 MR비와 H$_{ex}$가 모두 증가하였다. 또한 NiFe/FeMn/NiFe삼중박막에서도 같은 결과를 얻었다. 300 mA로 laser열처리한 면적을 증가시켰을 때 자기저항곡선이 positive 피크는 감소하고 negative 피크는 증가하였다. 이러한 Laser 열처리효과에 의해 결과적으로 교환결합된 박막구조의 국소적 자화반전을 가능하게 하였다.

• 동력기계공학회지
• /
• 제9권1호
• /
• pp.76-81
• /
• 2005

The effect of micro-pulse plasma nitriding temperature and time on the case thickness, hardness and nitride formation in the surface of Fe-12Cr-22Mn-X alloy with 3% Co and 1% Ti alloys elements investigated. External compound layer and internal diffusion layer was constituted in plasma nitride case of Fe-12Cr-22Mn-X alloys and formed nitride phase such as ${\gamma}'-Fe4N\;and\;{\varepsilon}-Fe2-3N$. Case depth increased with increasing the plasma nitriding temperature and time. Surface hardness of nitrided Fe-12Cr-22Mn-X alloys obtained the above value of Hv 1,600 and case depth obtained the above value of $45{\mu}m$ in Fe-12Cr-22Mn-3Co alloy and $60{\mu}m$ in Fe-12Cr-22Mn-1Ti alloy. Wear-resistance increased with increasing plasma nitriding time and showing the higher value in Fe-12Cr-22Mn-1Ti alloy than Fe-12Cr-22Mn-3Co alloy.