• Title/Summary/Keyword: MN9D

Search Result 211, Processing Time 0.024 seconds

Characterization of (La,Sr))$MnO_3/Gd_{0.2}Ce_{0.8}O_{1.9}$ Interface with Citric Acid Contents and Sintering Temperature (시트르산의 양과 소결온도에 따른 (La,Sr)$MnO_3/Gd_{0.2}Ce_{0.8}O_{1.9}$ 계면특성)

  • 윤일영;윤희성;김병호
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.11 no.1
    • /
    • pp.18-25
    • /
    • 1998
  • G $d_{0.2}$C $e_{0.8}$ $O_{1.9}$(CGO) for electrolyte and L $a_{0.5}$S $r_{0.5}$Mn $O_3$(LSM50) for cathode in Solid Oxide Fuel Cells(SOFC) were synthesized by citrate process. Specimens were prepared with sintering temperatures at 110$0^{\circ}C$, 120$0^{\circ}C$ and 130$0^{\circ}C$, which were fabricated by slurry coating with citric acid contents. Interfacial resistance was measured between cathode and electrolyte using AC-impedance analyzer. With various citric acid content, the degree of agglomeration for the initial particles changed. Also sintering temperature changed the particle size and the degree of densification of cathode. Factors affecting the interfacial resistance were adherent degree of the electrolyte and cathode, distribution of TPB(three phase boundaries, TPB i.e., electrolyte/electrode/gas phase area) and porosity of cathode. By increasing the sintering temperature, particle size and densification of the cathode were increased. And then, TPB area which occurs catalytic reaction was reduced and so interfacial resistance was increased.sed.sed.d.

  • PDF

Microwave Absorber Prepared by Using the Wasted Mn-Zn Ferrite and the Cement (Mn-Zn ferrite 廢棄物과 시멘트를 이용한 電波吸收體)

  • 조완식;김종오
    • Resources Recycling
    • /
    • v.9 no.6
    • /
    • pp.31-35
    • /
    • 2000
  • The complex permeability, the complex permittivity and the reflection loss are investigated in the composite microwave absorbers which are mixed with the wasted Mn-Zn ferrite and the industrial cement. The cement has larger the complex permittivity than that of the rubber. The complex permittivity is decreasing with the increment of the mixing ratio of Mn-Zn ferrite to cement (F/C in weight) and the complex permeability is increasing with the increment of F/C. The maximum reflection loss is above -40 dB at all samples. The matching frequency is in the range of 1.3 GHz to 2.9 GHz and is decreasing with the increment of F/C from 1 to 3. The matching thickness is increasing with the increment of F/C. The wasted Mn-Zn ferrite and the cement is very useful material for the composite microwave absorber.

  • PDF

A Study on the Magnetic Properties and Microstructures of Mn-Ir/Ni-Fe/Zr Muti layers with Various Compositions, Thicknesses and Base Pressures (Mn-Ir의 조성과 두께 및 초기진공도에 따른 Mn-Ir/Ni-Fe/Zr 다층막의 자기적특성과 미세구조 연구)

  • 노재철;최영석;이경섭;김용성;서수정
    • Journal of the Korean Magnetics Society
    • /
    • v.9 no.3
    • /
    • pp.166-172
    • /
    • 1999
  • The magnetic properties between Mn-Ir antiferromagnetic layer and Ni-Fe ferromagnetic layer have been investigated in Mn-Ir/Ni-Fe/Zr on Si wafer formed by magnetron sputtering. Mn-Ir was sputtered from Ir chips and Mn target using D.C. power, Ni-Fe and Zr were deposited from Ni-Fe and Zr targets using D.C. power under Ar atmosphere. We studied the dependence of the magnetic properties on Ir content of Mn-Ir layer for Mn-Ir/Ni-Fe bilayer, and obtained the highest $H_ex$ of 219 Oe and the low $H_c$ of 30 Oe. And then focused on the effect of base pressure for Mn-Ir containing multilayers. Our experimental data showed that if the base pressure is higher than $3.0{\times}10^{-6}\;Torr$, the exchange anisotropy of Mn-Ir/Ni-Fe/Zr disappeared probably due to the grain refining of Mn-Ir film. In addition we have studied the dependence of Zr buffer on magnetic properties of Mn-Ir/Ni-Fe/Zr multilayers, and observed that Zr buffer about (111) texture and lower $H_c$ of Mn-Ir/Ni-Fe/Zr multilayer.

  • PDF

Purification and Properties of D-Xylose Isomerase from Lactococcus sp. JK-8 (Lactococcus sp. JK-8에서 생산된 D-Xylose isomerase의 정제와 특성에 관한 연구)

  • Jun, Hong-Ki;Kim, Suk-Young;Baik, Hyung-Suk
    • Journal of Life Science
    • /
    • v.14 no.4
    • /
    • pp.636-643
    • /
    • 2004
  • D-Xylose isomerase produced by Lactococcus sp. JK-8, isolated from kimchi, was purified 17-fold of homogeneity, and its physicochemical properties were determined. Although the N-terminal amino acid sequence of D-xylose isomerase was analysed to Ala-Tyr-Phe-Asn-Asp-Ile-Ala-Pro-Ile-Lys, it was not similar to that of Lactobacillus enzyme. The molecular weight of the purified enzyme was estimated to be 180 kDa by gel filtration, 45 kDa by SDS-PAGE and the enzyme was homotetramer. The optimum pH of the enzyme was around 7 and stable between pH 6 and 8. The optimum reaction temperature was 7$0^{\circ}C$ and stable up to 7$0^{\circ}C$ in the presence of 1 mM $Mn^{2+}$. Like other D-xylose isomerases, this enzyme required divalent cation, such as $Mg^{2+}$, $Co^{2+}$, or $Mn^{2+}$ for the activity and thermostability. $Mn^{2+}$was the best activator. Substrate specificity studies showed that this enzyme was highly active on D-xylose. The enzyme had an isoelectric point of 4.8, and fm values for D-xylose was 5.9 mM.

Nucleophilic Addition of Phosphate to Coordinated (Arene)manganes Tricarbonyl Cations

  • Chung, Young-Keun;Bae, Hye-Kyung;Jung, Il-Nam
    • Bulletin of the Korean Chemical Society
    • /
    • v.9 no.6
    • /
    • pp.349-352
    • /
    • 1988
  • [(Benzene)Mn$(CO)_3$]$^+$ reacts with NaP(O) (OR)$_2$ (R = Me, Et, Ph) to give the phosphonate compound 1. Compound 1 reacts with R'Li (R = Me, Ph, $^nBu, ^tBu$) to yield the isomerized compound 2 and the alkylated compound 3. [(Toluene)Mn$(CO)_3$]$^+$ reacts with NaP(O)$(OMe)_2$ to give the phosphonate complexes 1-A and 1-B. Treatment of 1-A with $^tBuLi$ in THF affords complexes 3-A and 3-B with the later major. With 1-B only the complex 3-C is formed. [(Anisole)Mn$(CO)_3$]$^+$ reacts with NaP(O)$(OMe)_2$ to give the phosphate complex 1-C, which on treatment with $^tBuLi$ and then $H_2O$ yields compound 3-D. After demetallation of compound 3-D, meta-tertbutyl-anisole is obtained in a reasonable yield.

Dietary Intakes, Serum Concentrations, and Urinary Excretions of Fe, Zn, Cu, Mn, Se, Mo, and Cr of Korean Young Adult Women (일부 젊은 성인여자의 Fe, Zn, Cu, Mn, Se, Mo 및 Cr의 식사섭취, 혈청농도 및 소변배설)

  • Kim, Kyune-Hee;Lim, Hyeon-Sook
    • Journal of Nutrition and Health
    • /
    • v.39 no.8
    • /
    • pp.762-772
    • /
    • 2006
  • This study was conducted to investigate dietary intakes, serum concentrations, and urinary excretions of iron (Fe), zinc (Zn), copper (Cu), manganese (Mn), selenium (Se), molybdenum (Mo), and chromium (Cr) of Korean young adult women. A total of 19 apparently healthy young adult women aged in their twenties or thirties participated voluntarily. One-tenth of all foods they consumed for 3 consecutive days were collected, all urine excreted for the same 3 days was gathered, and fasting venous blood was withdrawn for the trace mineral analyses. Of the food, blood, and urine samples, the contents of Zn, Cu, Mn, Se, Mo, and Cr were analyzed by inductively coupled plasma-mass spectroscopy (ICP-MS) and that of Fe by inductively coupled plasma-atomic emission spectroscopy (ICP-AES) after wet digestion. The intake of Fe, $6.94{\pm}2.18mg$, did not meet the estimated average requirement (EAR) for Korean women aged 20-29 years old. On the contrary, the intakes of Zn ($9.35{\pm}4.95mg$), Cu ($1.18{\pm}0.26mg$), and Mn ($3.69{\pm}0.69mg$) were sufficient for each respective EAR. However, some of the subjects did not take the EAR for Zn. The Se intake, $41.93{\pm}9.28{\mu}g$, however, was almost similar to the EAR for Se. Although there are no references for Mo and Cr, the intakes of these minerals ($134.0{\pm}49.1\;and\;136.5{\pm}147.9{\mu}g$, respectively) seemed to be excessively sufficient. Serum Fe concentration, $88.7{\pm}36.8{\mu}g/dL$, seemed to be a little bit lower than its reference median but within its normal range. Approximately one-fourth of the subjects were in anemic determined by Hb and Hct and below the deficiency serum level of Fe, $60{\mu}g/dL$. In addition, serum Se concentration, $3.73{\pm}0.60{\mu}g/dL$, was also below its reference median and normal range. However, serum concentrations of Zn ($99.6{\pm}30.6{\mu}g/dL$) and Mo ($0.25{\pm}0.10{\mu}g/dL$) were fairly good compared to each reference median. The status of Cu could be determined as good although its serum concentration ($91.6{\pm}14.6{\mu}g/dL$) was slightly below its reference median. Since there are no decisive reference values, it was not easy to evaluate serum concentrations of Mn ($0.93{\pm}0.85{\mu}g/dL$) and Cr ($8.60{\pm}7.25{\mu}g/dL$). But Mn and Cr status seemed to be adequate. Urinary Fe excretion, $4.48{\pm}1.98{\mu}g/dL$, was pretty much lower than its reference and that of Se, $2.45{\pm}1.17{\mu}g/dL$, was also lower than its average. On the other hand, those of Zn ($42.95{\pm}20.47{\mu}g/dL$) and Cu ($5.68{\pm}1.50{\mu}g/dL$) were flirty good. In case of Mn, urinary excretion, $0.31{\pm}0.09{\mu}g/dL$, was much greater than its reference. Urinary excretions of Mo ($7.48{\pm}2.95{\mu}g/dL$) and Cr ($1.37{\pm}0.41{\mu}g/dL$) were very higher compared to each reference. The results of this study revealed that Korean young adult women were considerably poor in Fe status, a bit inadequate in Se status, partly inadequate in Zn status, and flirty good in Cu, Mn, Mo and Cr status. However, there was a problem of excessive intakes of Mo and Cr. It, therefore, should be concerned to increase the intakes of Fe, Se and Zn but to decrease Mo and Cr consumption for young adult women.

Simultaneous Determination of Trace Metals in Infant Formula by AAS Method (AAS법에 의한 유아용 분유중 미량 금속의 동시정량에 관한 연구)

  • Park Kyung-Lyeoull
    • Journal of environmental and Sanitary engineering
    • /
    • v.3 no.2 s.5
    • /
    • pp.99-106
    • /
    • 1988
  • In order to analyze trace metals by Atomic absorption spectrophotometer in infant formula milk powder, Wet digestion method using nitric acid, perchloric acid mainly and D.D.T.C.-M.I.B.K. extraction method were done. The r-value of calibration curve were more than 0.999 in Cu, Mn, Zn. Recovery test showed high recovery rate of $97-104\%$. The results were as follows: Averages of total samples were Cu $1.92\pm1.24 ppm,\;Mn\;1.18\pm1.01ppm,\;Zn\;22.43\pm8.88ppm.$ Averages of Common Infant formula were Cu1.96\pm1.26ppm,\;Mn\;1.0\pm0.57ppm,\;Zn\;21.52\pm9.72ppm.$ Averages of follow-up infant formula were Cu$1.89\pm1.26ppm,\;Mn\;1.36\pm1.31ppm,\;Zn\;23.34\pm8.7 ppm$.

  • PDF

A Study on the Content of Cu, Fe, Zn, Mn, Pb, Cd in Market Milk (市乳中의 Cu, Fe, Zn, Mn, Pb, Cd, 함량에 관한 연구)

  • 김대선
    • Journal of Environmental Health Sciences
    • /
    • v.12 no.1
    • /
    • pp.69-78
    • /
    • 1986
  • In order to determine the content levels of trace metals in cow's milk, 79 market milk samples were collected from markets in major cities of Korea from July to August, 1985 and analyzed for content levels of Cu, Fe, Zn, Mn, Pb, Cd. The Results were as follows Cu, average 43.5 $\mu$g/l range 14 ~ 172.7 $\mu$g/l Fe, average 398.4 $\mu$g/l range 35 ~ 1,873 $\mu$g/l Zn, average 2.917 mg/l range 1.233 ~ 7.46 mg/l Mn, average 26.74 $\mu$g/l range 7.6 ~ 102 $\mu$g/l Pb, average 33.9 $\mu$g/l range N.D. ~ 105 $\mu$g/l Cd, average 1.73 $\mu$g/l range N.D. ~ 5.4 $\mu$g/l

  • PDF

Microstructure and Machinability with Alloying Elements in the 304 Stainless Steel (304 스테인레스강에서 첨가원소에 따른 미세조직 및 절삭성 연구)

  • Kang, S.S.;Kim, H.C.;Lee, J.H.;Cho, J.R.;Jung, Y.G.;Jang, C.H.;Hwang, H.S.
    • Korean Journal of Materials Research
    • /
    • v.16 no.9
    • /
    • pp.584-591
    • /
    • 2006
  • To enhance the machinability of the austenite stainless alloys, Mn and S were added to form MnS in the austenite matrix. Recently, Ca is also added to increase machinability. The alloying elements, such as C, Mn, S, Ca, and Al, are known to affect machinability, but those roles are not well understood. In this study, the ingots, controlled of alloying elements, C, Mn, S, Ca, Al, were prepared in the 304 stainless steel. The relationship between microstructure and machinability was compared to understand the role of alloying elements. It was proved that Mn and S enhanced machinability but C reduced it by analyzing cutting force on machining in the lathe. The alloying elements, Ca and Al, made a complex oxide compound of Mn-S-Ca-Al-Si-O, which results in increasing tool life. The ferrite volume fraction was changed with alloying elements and the effect of the ferrite fraction on machining was also discussed.

Effect of O2/Ar+O2 concentration on phase stability of transparent Mn doped SnO2 monolayer film (혼합기체 O2/Ar+O2 농도 변화가 Mn 도핑된 SnO2 투명전도막의 상 안정성에 미치는 영향)

  • Kim, Taekeun;Jang, Guneik
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.31 no.4
    • /
    • pp.154-158
    • /
    • 2021
  • The optical transmittance of Mn-doped SnO2 monolayer film increased gradually from 80.9 to 85.4 % at 550 nm wavelengths upon increasing the O2/Ar+O2 concentration rate from 0 to 7.9 % and the band gap energy changed from 3.0 to 3.6 eV. The resistivity tended to decrease from 3.21 Ω·cm to 0.03 Ω·cm, reaching a minimum at 2.7 %, and then gradually increased from 0.03 to 52.0 Ω·cm at higher O2/Ar+O2 gas concentration ratio. Based on XPS spectra analysis, the Sn 3d5/2 peak of Mn-doped SnO2 single layer shifted slightly from 486.40 to 486.58 and O1s peak also shifted from 530.20 to 530.33 eV with increase the O2/Ar+O2 concentration ratio. Therefore, the XPS spectra results indicate that a multiphase with SnO and SnO2 coexisted in the sputtered Mn-doped SnO2 monolayer film.