• 폴리머
• /
• 제28권6호
• /
• pp.524-530
• /
• 2004

스티렌, 폴리(에틸렌 글리콜) 메타크릴레이트 (PEG-MMA) 혹은 폴리(에틸렌 글리콜) 디메타크릴레이트 (PEG-diMMA)를 중성 매질에서 무유화제 (emulsifier-free) 유화 중합하여 표면에 에틸렌 글리콜기를 갖는 폴리스티렌 입자를 합성하였고, 이로부터 동결 건조되어진 분말을 제조하였다. 고분자 분말은 FT-TR 분광기로 구조를 확인하였고, 광산란 입도 분석기와 주사 전자 현미경 (SEM)을 이용하여 입자 크기와 분산도를 조사하였다. 스티렌에 대하여 공단량체 PEG-MMA는 2∼5 mol%, PEG-diMMA는 1 mol% 농도 부근에서 균일한 입자 크기를 얻을 수 있었다. 합성된 입자의 표면 전하를 유전 매질 내에서 ELS-8000 광산란법을 이용하여 제타 포텐셜을 측정하였다. 스티렌에 대하여 PEG-MMA 5 mol%에서 183 mV의 아주 높은 제타 포텐셜이 측정되었다.

• Macromolecular Research
• /
• 제11권6호
• /
• pp.425-430
• /
• 2003

Two types of poly(n-butyl acrylate) copolymer/silicate nanocomposites have been produced: poly(n-butyl acrylate-co-methyl methacrylate) [P(BA-co-MMA)]/silicate nanocomposites and poly(n-butyl acrylate-co-styrene) [P(BA-co-ST)]/silicate nanocomposites. The P(BA-co-MMA)/silicate nanocomposites shows the exfoliated structures but a P(BA-co-ST)/silicate nanocomposites have intercalated structures, because the BA/MMA comonomer has a higher polarity (e-value in Q-e scheme) than the BA/ST comonomer. The BA/MMA comonomer expanded the interlayer space of the silicate wider than did the BA/ST comonomer. The thermal degradation onset point of the P(BA-co-MMA)/silicate nanocomposites was 43$^{\circ}C$ higher than that of pure P(BA-co-MMA). P(BA-co-MMA)T5%, P(BA-co-MMA)T10%, and P(BA-co-MMA)T20% exhibit 134,302, and 195% increases, respectively, in their storage moduli at -20$^{\circ}C$ relative to the pure copolymer.

• Macromolecular Research
• /
• 제15권4호
• /
• pp.302-307
• /
• 2007

The living radical polymerization of methyl methacrylate (MMA) by atom transfer radical polymerization, (ATRP) employing a $Fe(II)X_2/diphenyl-2-pyridyl$ phosphine (PyP) catalytic system (X=Cl, Br), was investigated using several initiators and solvents at various temperatures. Most of the polymerizations with the PyP ligand were well controlled, with a linear increase in the number average molecular weights ($M_n$) vs. conversion, with relatively low molecular weight distributions ($M_w/M_n=1.2-1.4$) throughout the reactions. The measured weights matched those of the predicted values. The ethyl-2-bromoisobutyrate (EBriB) initiated ATRP of MMA, with the $Fe(II)X_2/diphenyl-2-pyridyl$ phosphine catalytic system (X=Cl, Br), was better controlled in p-xylene at $80^{\circ}C$ than the other solvents used in this study.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.97.2-97
• /
• 2001

This work is concerned with the improvement of the productivity and the product quality in the polymerization reactors by using model-on-demand predictive control(MoDPC). This technique is applied to a continuous styrene polymerization reactor and a semibatch methyl methacrylate (MMA)/vinyl acetate(VAc) copolymerization reactor. The regress is constructed with the most influential variables the conversion and the jacket inlet temperature for the styrene polymerization reactor, and the free volume and the reactor temperature for the MMA/VAc copolymerization reactor through open loop operations. From the simulation results for setpoint tracking and disturbance rejection problems, it is demonstrated that the MoDPC shows ...

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.468-473
• /
• 1998

A mathematical model was developed for a continuous re-actor in which free radical polymerization of methyl methacrylate (MMA) occurred. Elementary reactions considered in this study were initiation, propagation, termination, and chain transfers to monomer and solvent. The reactor model took into account the density change of the reactor contents and the gel effect. A control system was designed for a continuous reactor using extended Kalman filter (EKF) based non-linear model predictive controller (NLMPC) to control the conversion and the weight average molecular weight of the polymer product. Control input variables were the jacket inlet temperature and the feed flow rate. For the purpose of validation of the control strategy, on-line digital control experiments were conducted with densitometer and viscometer for the measurement of the polymer properties. Despite the com-plex and nonlinear features of the polymerization reaction system, the EKF based NLMPC performed quite satisfactorily for the property control of the continuous polymerization reactor.

• Macromolecular Research
• /
• 제12권2호
• /
• pp.233-239
• /
• 2004

We prepared thermally robust fully crosslinked poly(methyl methacrylate-co-divinyl benzene) ［poly(MMA-co-DVB)］microspheres successfully by precipitation polymerization in the absence of a stabilizing agent. The DVB concentration plays a pivotal role not only in the formation of the individually stable microspheres but also in the polymerization characteristics, including the particle size, the uniformity of size, the polymerization yield, and the thermal properties. The number-average diameter of the microspheres increased linearly, from 0.72 to 2.15 $\mu\textrm{m}$, and the particle size distribution became narrower, by elevating the uniformity from 1.35 to 1.12, as the DVB concentration increased from 20 to 75 mol%. In addition, the yield of the polymerization increased, from 73.4 to 98.6%, as the DVB concentration increased. Since the prepared particles possess fully crosslinked microstructures, no glass transition temperatures were observed, but all the samples prepared with DVB concentrations ranging from 20 to 75 mol% possess enhanced thermal properties. Based on the DSC and TGA data, the thermal stability of the mesospheres prepared by the precipitation polymerization is significantly improved as a result of crosslinking with DVB.

• 청정기술
• /
• 제11권1호
• /
• pp.41-50
• /
• 2005

본 연구는 환경친화적인 선형 비이온 계면활성제인 LE-형유화제를 사용하여 점착성분의 단량체로 노말부틸 아크릴레이트 (n-butyl acrylate, n-BA)와 응집성분의 단량체로 메틸메타 아크릴레이트 (methyl metacrylate, MMA)를 사용하여, 폴리머 시멘트용 아크릴계 에멀젼 수지를 제조하기 한 최적조건을 얻기 위해 수용액상에서 유화중합을 실시하였다. 실험결과, 사용한 계면활성제 (LE-형)의 친수성인 체인 길이(n)의 값이 증가할수록 응석의 발생이 줄어들어 안정한 폴리머 에멀젼을 얻을 수 있었다. 최종 폴리머 에멀젼의 농도는 이 계면활성제의 사용량을 증가시킴에 따라 증가하다가 어느 농도 이상에서 응석의 발생이 거의 없는 폴리머 에멀젼을 얻을 수 있었으며, 반면에 평균 입자크기도 사용량에 따라 작아지다가 250 nm로 일정한 크기를 나타내었다. 또한 기능성 폴리머로서 보조모노머의 첨가는 최종 폴리머 에멀젼의 응석과 입자크기에 크게 영향을 미쳤는데, 주 모노머에 보조 모노머인 아크릴산 (acrylic acid, AA)과 아크릴 아마이드 (acrylic amide, AM)의 혼합하여 첨가한 경우, 첨가하지 않은 경우에 비해 응석의 발생이 줄어들어 안정한 폴리머 에멀젼을 얻을 수 있었다. 최적조건에서 어진 아크릴 폴리머 에멀젼은 평균 입자크기 200-300 nm, 제타전위 (zeta potential)값 -50 mv 정도였으며, 단일 유리전이온도 (glass temperature, Tg)를 가진 고분자 나노 입자가 수용액상에 잘 분산되어 있음을 알 수 있었다. 따라서 중합조건을 최적화시켜 안정된 폴리머 에멀젼을 얻을 있었다.

• Elastomers and Composites
• /
• 제46권1호
• /
• pp.60-69
• /
• 2011

[ $2.1\;{\mu}m$ ]입자경의 단분산 PBA seed를 이용한 2단계 분산중합을 seeded batch process 와 seeded semi-continuous process를 이용하여 다양한 형태의 PBA/PMMA composite 미립자를 제조하였다. Batch process의 경우 PBA/PMMA composite 입자의 모폴로지는 중합 분산매인 methanol/water 비와 중합 2단계에서의 PBA seed/MMA단량체의 비에 따라 크게 영향을 받으며, methanol/water 중합분산매중 물의 량이 증가함에 따라, 그리고 중합 2단계에서 MMA단량체량이 증가함에 따라 PBA와 PMMA간의 상분리현상이 심화되어 구형의 입자로부터 egg, snowman, confetti, peanut와 같은 비구형의 PBA/PMMA composite 입자들이 제조되었다. Semi-continuous process의 경우 단량체 부가시간을 조절함으로서 PBA/PMMA composite 입자의 모폴로지가 변함을 발견하였고 특히, 단량체의 결핍된 조건하에서 구형의 PBA(코어)/PMMA(쉘) composite 라텍스가 제조되었다.

• 한국의류학회지
• /
• 제13권1호
• /
• pp.89-97
• /
• 1989

Graft polymerization of MMA onto cotton fiber was carried out in two ways, two step graft polymerization and one step emulsion graft polymerization, using tetravalent cerium ion as an initiator. At two step graft polymerization, the first step was the pretreatment of cotton fiber with an aqueous initiator solution and the second was the grafting pretreated cotton fiber in the monomer solution. In case of one step emulsion graft polymerization, MMA was emulsified with SLS in initiator solution. Under the various graft polymerization conditions, graft yield, graft efficiency and from the Arrhenius plot the apparent activation energy were compared. The results of this study were as follows: 1. Graft yield and graft efficiency of emulsion graft polymerization were higher than those of two step graft polymerization. 2. In case of two step graft polymerization, graft yield was affected by the pretreatment time of cotton fiber with an aqueous initiator solution. And graft yield of emulsion graft polymerization was increased with the concentration of emulsifier below cmc of SLS and was decreased thereafter. 3. Elevation of temperature resulted increase in graft yield for both grafting methods. The apparent activation energy of emulsion graft pelymerzation was lower than that of two step graft polymerization. 4. Increased reaction time increased in graft yield, but decreased in graft efficiency. 5. Moisture regain of grafted cotton was decreased with graft yield.

• 통합자연과학논문집
• /
• 제2권1호
• /
• pp.1-12
• /
• 2009

This miniaccount presents the selective examples of our recent discoveries in the photopolymerization of vinyl monomers using the organic initiators such as hydrosilanes, poly(hydroarylsilane)s, benzoin silyl ethers, and thianthrene cation radical. In the photopolymerization of vinyl monomers with silanes polysilanes, while the polymerization yields and polymer molecular weights of the poly(MMA)s containing the silyl moieties decreased, the TGA residue yields and intensities of SiH stretching IR bands increased as the mole ratio of the silanes over MMA increased. The hydroarylsilane and poly(hydroarylsilane) seemed to influence strongly on the photopolymerizaiton of olefinic monomers as both chain initiation and chain transfer agents. For the photohomopolymerization and photocopolymerization of MA and AA, the similar trends were observed. Benzoin silyl ethers and thianthrene cation radical also exhibit the photoinitiating ability in the photopolymerization of MMA.