• Journal of the Korean Professional Engineers Association
• /
• v.21 no.1
• /
• pp.5-12
• /
• 1988

The purpose of this paper is to investigate on the optimum coating thickness layer of TiC-Al$_2$O$_3$ coated cemented carbide tool. Chemical Vapor Deposition (CVD) of a thick film of TiC-A1$_2$O$_3$ on a cemented carbide produces an intermediate layer, $1.5mutextrm{m}$, 4.5${\mu}{\textrm}{m}$, 7.5${\mu}{\textrm}{m}$ 10.5${\mu}{\textrm}{m}$, 4 kind of TiC between the substrate and the $1.5mutextrm{m}$ constant thick A1$_2$O$_3$ coating. Experiments were carried out with the test relationship between coating thickness and shear angle, surface roughness, cutting force, microphotograph of crater wear, flank wear, tool life. From the experimental results, it was found that the optimum coating thickness of TiC-A1$_2$O$_3$ is 6${\mu}{\textrm}{m}$. Although the coating thickness layer 9${\mu}{\textrm}{m}$. 12${\mu}{\textrm}{m}$ have a much loger tool wear than an 3${\mu}{\textrm}{m}$, 6${\mu}{\textrm}{m}$ coating tool in cutting condition feed 0.05mm/rev, and the condition of feed 0.2mm/rev, 0.3mm/rev has upon in the shot time phenomenon of chipping.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.1
• /
• pp.39-51
• /
• 1990

This research was carried out to offer the basis data for development of optimum drying schedule for a domestic oak species (Quercus grosseserrata B1.) by investigating drying rate. stress, defect, and moisuture gradient with board thicknesses and drying schedules (code number T4-C2 and T3-B1). The results were obtained as follows: 1. Average drying rate and total drying time from 52.2% to 5.8% were 0.105%/hr and 486 hours for drying schedule T4-C2 and those from 62.1% to 8.3% were 0.070%/hr. and 811 hours for drying schedule T3-B1. 2. Drying rates for 28mm- and 31mm-thick boards showed similar tendency, but were significantly different from 25mm- thick board in drying schedule T4-C2 and those for 22mm-, 25mm- 28mm- and 31mm-thick boards showed similar tendency but were significantly different from 19mm- thick boards in drying schedule T3-B1. 3. The moisture gradients for drying schedule T4-C2 were steeper than those for drying schedule T3-B1 during drying period. and especially in early drying stage slow slope of moisture gradients of drying schedule T3-B1 was effective in preventing serious problem of surface checks. 4. Drying stresses were lower in drying schedule T3-B1 than in drying schedule T4-C2 during drying period. 5. Drying schedule T4-C2 was appropriate for 25mm-thick board but not for 28mm- and 31mm-thick board because of strong drying condition. Drying schedule T3-B1 was appropriate for 28mm- and 31 mm-thick board but not for 19mm-, 22mm-, and 25mm-thick board because of weak drying condition.

• The Korean Journal of Malacology
• /
• v.31 no.4
• /
• pp.263-266
• /
• 2015

This study was performed to determine the effect of water temperature condition on survival rate and growth of juvenile geoduck (Panopea japonica). Panopea japonica juveniles were bred for 6 weeks at 12, 15, 18, 21, 24 and $27^{\circ}C$ on incubator. Juveniles median lethal times (LT50) were 29 hours in $27^{\circ}C$, 14.5 day in $24^{\circ}C$, 37.4 day in $21^{\circ}C$. Survival rate of water temperature 12, 15 and $18^{\circ}C$ showed a high survival rate in 95.0%, 95.0% and 93.3% at 6 weeks. As a result of culturing for 6 weeks at 12, 15, 18, 21 and $24^{\circ}C$, a daily growth of shell length and total weight was 0.10 mm, 0.12 mm, 0.13 mm, 0.16 mm and 0.14 mm, and 2.21 mg, 2.65 mg, 2.84 mg, 3.13 mg and 2.93 mg. Juvenile shell length and total weight have significantly increased at $15-21^{\circ}C$. However, mortality rate has significantly increased at more than $21^{\circ}C$. As a result, appropriate water temperature for juveniles culturing considered $15-18^{\circ}C$.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.3
• /
• pp.161-171
• /
• 1994

Mesh selection analysis for the trawl net were carried out at the Southern Korean Sea and the East China Sea during the 1992-1994 years by the training ship Seabada of the National Fisheries University of Pusan, using A type (51.2mm), B type (70.2mm), C type (77.6mm), D type (88.0mm) square mesh cod-ends. The fishing trials were made using bottom trawl of the trouser type cod-end with cover net. Selection curves and selection parameters were calculated by a logistic model for Sphyraena pinguis, Pampus argenteus, Trachurus japonicus, Pagrus major, Callanthias japonicus, Trichiurus lepturus. The results obtained are summarized as follows: 1. Red barracuda : Selection range and fifty percent selection length in the A type was 115.8mm, 292.8mm, respectively. 2. Harvest fish : Each selection range and fifty percent selection length in the B. C. and D type was 37.7mm, 113.8mm : 40.1mm, 131.7mm and 64.8mm, 148.6mm, respectively. Selection parameters of master curve were : slope, 3.81 : intercept, -6.4. Optimum mesh size was 89.3mm. 3. Horse mackerel : Each selection range and fifty percent selection length in the A, B, C and D type was 43.0mm, 148.3mm : 60.7mm, 183.2mm, 214.5mm and 91.4mm, 254.9mm, respectively. Selection parameters of master curve were : slope 2.30 : intercept, -6.4. Optimum mesh size was 66.8mm. 4. Red seabrem : Selection range and fifty percent selection length in the D type was 42.7mm, 203.4mm, respectively. 5. Yellowsail red bass : Selection range and fifty percent selection length in the A type was 84.0mm, 110.6mm, respectively. 6. Hair tail : Each selection range and fifty percent selection length in the A, B and C type was 59.7mm, 176.0mm : 100.9mm, 250.7mm and 178.6mm, 307.0mm, respectively. Selection parameters of master curve were : slope, 1.54 : intercept, -5.4. Optimum mesh size was 57.5mm.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.3 no.3
• /
• pp.187-198
• /
• 1970

The author succeeded in rearing the young blue crab from the first stage of zoe ato the true crab shape, and during this time he observed their growth and metamorphosis. The relationships between the number of eggs carried by female crabs (E) and the carapace width (C) and body weight (W) are shown as follows: E= 27.9049C-281.8155, E=0.5682 W-116.4606. There are five zoeal stages and a megalopa in the complete larval development of the blue crab. Water temperature in rearing aquaria ranged from 21.4 to $25.2^{\circ}C$. The duration of each zoeal stage was two days on the average. After the fifth moulting, the zoea becomes megalopa and 5 to 6 days later the megalopa moults and develops into the first stage of adult crab shape. The carapace width of megalopa measured about 1.70 mm and the carapace length, from the tip of the rostrum to the posterior dorsal margin of the carapace, was about 2.78 mm on the average. The carapace width and length of the first crab, 18 days after hatching, measured about 4.48 mm and 2.62 mm respectively. After two days, the first crab moulted and grew into the second crab with about 6.47 mm in carapace width and 4.66 mm in carapace length. The larval rearing in the outdoor tank shelved better results than in the indoor aquarium. The highest mortality occurred when the first stage of zoea moulted into the second stage. Percentage of crabs which survived, from the first crab to the ninth crab stages, was about $55\%$. The relationships between rearing days (D) and the carapace width (C), carapace length (L) and body weight (W) of the crab stages during 40 days of rearing are shown as follows. Carapace width, Indoor: C=1.1250D+1.7227 Outdoor C=1.3465D -0.2449 Carapace length, Indoor: L=0.6654D+1.6712 Outdoor: L=0.7893D+0.6919 Body Weight, Outdoor: $$W=1.15e^{0.12423D}$$ Indoor: $$W=6.759\times10^{-2}D^{1.2598}$$ (9-19 day old crabs) Outdoor: $$W=4.136\times10^{-2}D^{1.6024}$$ (21-40 day old crabs) During the crab stage, the following relationships between the number of moulting times and the carapace width (C), carapace length (L) and body weight (W) were found as follows: $$C=5.2e^{0.28119N}$$ $$L=3.65e^{0.26372N}$$ $$W= 0.14e^{0.7037N}$$ The relationships between the carapace length (L) and the carapace width (C) and body weight (W) of the crab stages are shown as follows: Carapace length, mm Formula 2.62-27.17 L=1.6864C-1.0387 7.47-18.53 $$W=9.367\times10^{-5}C^{3.5567}$$ 22.11-27.17 $$W=3.406\times10^{-5}C{3.8571}$$

• Journal of Korean Physical Therapy Science
• /
• v.3 no.2
• /
• pp.989-995
• /
• 1996

This study was conducted to investigate variation of cardiopulmonary function by use of building stairs, a questionnair survey and measurement was carried out for 50 students of department of physical therapy Andong Junior College from 20th September to 3rd October, 1995. The result were as follows: The average systolic blood pressure(SBP) of stability for 50 college students who were measured was 121.3 mmHg, the average diastolic blood pressure(DBP) of stability was 78.5 mmHg, the average pulse frequency of stability was 71.8(frequency/min), the average breathing frequency of stability was 20.4(frequency/min), and the body temperature of stability was $36.8^{\circ}C$. SBP among the second, third, and fourth floors was 129.0 mmHg, 127.0 mmHg, and, 132.0 mmHg (p=0.1919), DBP was 80.1 mmHg, 76.5 mmHg, and, 82.0 mmHg (p=0.4229), the pulse frequency was 74.0, 73.1, and 74.0(frequency/min). The breathing frequency among the second, third, and fourth floors was statistically gradually increased according to 21.4, 23.1 and 24.6(frequency/min)(p=0.0071). The body temperature among the second, third, and fourth floors was statistically less and less decreased according to $36.8^{\circ}C,\;36.6^{\circ}C$ and $36.5^{\circ}C$(p=0.0040). It was revealed by this study, the breathing frequency among the second, third, and fourth floors was statistically significant increased, the body temperature was statistically significant decreased.

• Korean Journal of Materials Research
• /
• v.8 no.5
• /
• pp.457-463
• /
• 1998

New neutron shielding materials, KNS-201, KNS-301 and KNS-601 have been fabricated to be used for radioactive material shipping and storage cask. The base materials are a modified and a hydrogenated bisphenol- A type and novolac type epoxy resin, and aluminium hydroxide and boron carbide are added. These shielding materials offer good fluidity at processing, which makes it possible to form this resin shield into complicated geometric shapes such as radioactive material shipping and storage cask. Several measurements were made for the shielding materials to evaluate the thermal and mechanical properties and radiation resistance. The properties of the shielding materials are as follows: onset temperatures 2S7~28$0^{\circ}C$, thermal conductivities 0.9S~1.14W/m. K, thermal expansion coefficients 0.77~1.26x$10_{-6}{\circ}C_{-1}$, combustion characteristics < 80$0^{\circ}C$, ATB(average time of burning) < 5sec, AEB(average extent of burning) < 5mm, tensile strengths 2.5~3.2kg/$\textrm{mm}^2$, compressive strengths 13.2~1S.2kg/$\textrm{mm}^2$, flexural strengths 5.2 -6.4kg/$\textrm{mm}^2$. In general, the concerned properties of KNS-201, KNS-301 and KNS-601 were revealed to be better than those of NS-4- FR. foreign neutron shielding material. It is also observed that the radiation resistance of KNS- 601 was better than those of KNS-201 and KNS-301.

• The Korean Journal of Pesticide Science
• /
• v.4 no.4
• /
• pp.72-76
• /
• 2000

The study was conducted to investigate the developmental periods and effect of several insecticides on Hemiptarsenus sp., ectoparasitoid of Liriomyza trifolii. The mean length and width of egg were 0.5mm and 0.1mm. The mean length of larva, pupae, abult female, and abult male were 1.9mm, 2.0mm, 2.2mm, and 1.8mm, respectively. Developmental periods of Hemiptarsenus sp. from egg to larva at 15, 20, 25, $30^{\circ}C$ were 16.9, 8.8, 5.9, and 4.5 days, and those of pupa were 20.7, 9.7, 5.6, and 3.4 days, respectively. Based on these results, developmental threshold temperatures and effective temperatures were $9.5^{\circ}C$, 91.5 degree-days in egg-larval stage, $10.9^{\circ}C$, 142.3 degree-days in pupal stage. When several insecticides were evaluated to Hemiptarsenus sp. at the recommended concentrations, B.t WP, diflubenzuron WP, and cyromazin were negligiblly effective all life stages. Fipronil SC, cartap SP, spinosad GW were less toxic to larva and pupa, but highly toxic to adults. Abamectin EC was less toxic to all life stages, but inhibited oviposition of 50% more to Hemiptarsenus sp. female.

• The Journal of the Korean dental association
• /
• v.49 no.4
• /
• pp.203-210
• /
• 2011

The aims of this study were to evaluate the adequate thickness of opaque resins for situations such as an oral black cavity and discolored tooth structure, as well as the translucency of each opaque material at various thicknesses. Six opaque-shade composite resins (Z-350 OA3, Amelogen Universal A2O, Esthet-X A2O, Esthet-X A4O, Charmfil UO and Aelite Universal OA3) were prepared in metal molds with a hole of 8 mm in diameter and various thicknesses (0.5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0 mm and 4.0mm). Four backgrounds (white tile, black tile, C4 shade porcelain and opaque resin itself) were used to determine the translucency parameter (between black and white backgrounds). and to mimic a black oral cavity (between black and opaque resin backgrounds) and a discolored tooth structure (between C4 and opaque resin backgrounds). Color measurements were made by a colorimeter to determine the CIELAB values of each specimen with each background and to calculate the translucency parameter and ${\Delta}E^*$ value difference among the specimens on the backgrounds. The translucency parameter and ${\Delta}E^*$ obtained between black and opaque resin backgrounds decreased in similar pattern as thickness increased. A C4 background was masked by resin thicknesses of 0.5-1.0mm, while a black background required thicknesses of 1.0-2.0mm. Adequate knowledge about differences in the optical character like translucency of the materials used is essential, together with the accumulated experience of the individual clinician.

• Transactions of the Korean hydrogen and new energy society
• /
• v.13 no.2
• /
• pp.151-158
• /
• 2002

The hydorgen storage alloys were produced by melting in arc melting furnace and then solution heat treated at $1,100^{\circ}C$ followed by pulverization. The chemical analysis on the samples showed that the major elements of misch metal(Mm) were La, Ce, Pr and Nd with impurity less than 1wt.%. X-ray diffraction indicated that the structure for these samples were a single phase of hexagonal with $CaCu_5$ type. Compared to the initial particle size $100{\sim}110{\mu}m$, the many fine cracks were found and particle size decreased to $14{\mu}m$ for $MmNi_{4.5}Mn_{0.5}$ after hydriding/dehydring test run. To activate the sample the vessel filled with hydrogen storage alloys was first evacuated for for at $70^{\circ}C$ and then treated for 10.5hr under hydrogen pressure of 20atm for $MmNi_{4.5}Mn_{0.5}$ alloy. The experimental data showed that the hydrogen storage alloy of $MmNi_{4.5}Mn_{0.5}$ had superior adsorption and description properties within a temperature rang of $40^{\circ}C{\sim}80^{\circ}C$ and also they had a good P-C-T curve.