• 토지주택연구
• /
• 제15권1호
• /
• pp.23-38
• /
• 2024

본 연구는 유형별 공공임대주택의 주거환경을 최저주거기준과 세부 기준을 중심으로 ANOVA, 다항로지스틱모형을 활용하여 미시적으로 살펴보았다. 주요 실증분석의 결과는 다음과 같다. 첫 번째, 입주자뿐만 아니라 최저주거기준과 세부 기준은 공공임대주택 유형별로 특성의 차이를 확인할 수 있었다. 두 번째, 행복주택은 최저주거기준 미달비율과 설비기준을 제외한 나머지 세부 기준의 미달비율이 높아, 전반적인 주거환경이 가장 열악한 것으로 나타났다. 세 번째, 영구임대, 국민임대, 매입/전세임대 중 영구임대의 최저주거기준과 면적·방기준이 취약하였으며, 매입/전세임대는 구조·성능·환경기준의 미달비율이 높게 나타났다. 네 번째, 매입/전세임대가 다른 공공임대 유형보다 임대 불안감이 높았고, 특히 임대료상승과 보증금 미반환에 대한 불안이 높다는 것을 확인하였다. 이러한 결과를 바탕으로 공공임대주택 유형에 따른 맞춤형 지원을 통해 주거환경 개선을 위한 노력이 필요하다는 것을 확인하였다.

• KIEAE Journal
• /
• 제10권1호
• /
• pp.91-96
• /
• 2010

Incheon Free Economic Zone's Songdo Area is a newly constructed city built on land reclaimed from the seaside and the surrounding area. Yeongjong Area is made after Land reclamation between Yeongjong Island and Yongyou Island began in November 1992. The first phase linking these islands to create the Incheon International Airport (phase 1) and the Airport Town Square community was finished in March 2001. However, if we take a look at the overall status of the project as it is carried on at present, it is hard to deny that the project is trapped inside the same legal restrictions as are all other existing cities, which permits Songdo Area and Yeongjong Area to meet only very minimum standards. This study intends to analyze and assess the Incheon Free Economic Zone's Songdo Area and Yeongjong Area of environmentally friendly construction and to rate its current development status, exposing any problems and offering alternative solutions. In this paper, the current state of constructions in Songdo Area and Yeongjong Area were reviewed. Then a quantitative analysis and assessment for the Songdo Area and Yeongjong Area constructions of apartments, complex buildings, office buildings, school facilities, store and hotel facilities were conducted by using green building certification criteria. Finally the synthetic results of environmental performance evaluation for Incheon Free Economic Zone's Songdo Area and Yeongjong Area constructions and follow-up suggestions were described.

• 대한전기학회논문지
• /
• 제32권1호
• /
• pp.13-23
• /
• 1983

This paper deals with the three-level PLA constructed by EXCLUSIVE-OR, AND, and OR. (abbreviated as EXANOR). Most PLA circuits have constraints on minimum chip area and minimal input lines. Thus, the reduction of PLA chip area is an important factor in design of logic circuits. In this paper, newly constructed architecture of PLA is proposed and then, its reduction effect is proved theoretically and some of selected examples are illustrated for designing three-level PLA circuits.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.216-221
• /
• 2001

In this paper, statistical properties of waves in the sea area of Pohang, Korea are examined absed on 1998-1999's wave data from directional wave buoy which is located Pohang(Janggigog). Wave data aquisition rate, monthly maximium, minimum and mean wave heights, frequency of wave direction are summarized. Wave height and period scatter diagrams and n-year return period wave heights are estimated. Wave periods of maximum wave heights are also estimated.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1386-1389
• /
• 1993

We are describing the architecture of a fuzzy logic controller using pulse-width-modulation (PDM) technique and a pipeline structure. Features of this controller are: A new architecture for the inference unit, reduced chip area and less I/O-pins. Additionally we present two different rule-bases: one hardwired with reduced chip-area and the other programmable for prototyping. Also an architecture of a parallel minimum-gate is shown.

• 핵의학기술
• /
• 제16권2호
• /
• pp.12-17
• /
• 2012

방사성 요오드 치료병실에서 나온 환의 및 시트는 본디 방사성폐기물로서 관련 규정에 따라 일반 쓰레기와 동일하게 처리해야 하지만 사정상 일정기간 보관하여 방사능을 감쇄시킨 후 재사용하게 된다. 통상 최소보관기간 산출에 표면오염도(Bq/$m^2$)를 기반으로 하는 반출기준을 적용하고 있다. 하지만 방사선측정기를 이용하여 단위 면적당 총방사능량을 구하는 방법은 측정방법에 따라 편차와 불확실성이 상당히 커진다. 본 연구에서는 '방사성폐기물 자체처분 등에 관한 규정'에서 제시하고 있는 핵종 농도(Bq/g)를 Dose Calibrator를 이용하여 직접 측정하여 최소보관기간을 구함으로써, 환의 및 시트의 정확한 재사용 주기를 산출하고자 한다. 한편 반출기준으로 산출한 최소보관기간과 비교하여 그 차이를 살펴보았다. 본원의 방사성 요오드 치료병실에서 2011년 7월부터 2012년 3월까지 I-131을 3.7 GBq (100 mCi) 이상을 사용하여 방사성 요오드 치료를 시행한 환자 31명이 사용한 환의와 시트의 방사선 오염도를 측정하여 최소보관기간을 산출하였다. 최소보관기간은 핵종 농도를 측정하여 '방사성폐기물 자체처분 등에 관한 규정'에 따라 100 Bq/g이 되는 시점과 표면오염도를 측정하여 반출기준에 따라 허용표면오염도의 1/10, 즉 4 kBq/$m^2$되는 시점을 붕괴식에 대입하여 산출하였다. 반출기준으로 산출한 최소보관기간은 침대/담요시트는 14.2일, 베개시트는 4.6일, 환의(상(上))은 63일, 환의(하(下))는 78일 이었으며, 자체처분 기준에 따른 최소보관기간은 베개시트는 18.1일, 환의(상(上))은 43일, 환의(하(下))는 62일로 산출되었다. 표면오염도와 핵종 농도의 상관관계를 분석해 본 결과 베개시트와 환의(상(上))는 상관관계가 높게 나타났으나, 환의(하)는 낮게 나타났다. 이는 베개시트와 환의는 방사성오염이 부분에 국한 되어 측정값이 일정한 반면, 환의(하(下))는 소변에 의한 방사성오염이 여러 부분에 산재되어 있어 방사선측정기의 측정값이 상대적으로 낮게 측정된 결과로 생각 된다. 실질적으로 방사성 오염도를 측정한 결과 반출기준과 자체처분 기준을 상당량 초과하는 방사능이 존재하는 것을 확인할 수 있었다. 환의와 시트의 최소보관기간 산출에는 핵종 농도를 기준으로 하는 자체처분 기준을 적용하는 것이 더 적합하다고 할 수 있다. 방사능에 오염된 환의 및 시트는 최소 60일 정도는 보관해야 성급한 재사용에 따른 불필요한 방사선피폭 및 오염 확산을 방지할 수 있을 것으로 생각된다.

• 한국조경학회지
• /
• 제34권4호
• /
• pp.105-115
• /
• 2006

Biotope Area Ratio ($BFF; BiotopFl{\"{a}}chenFaktor$) was developed in Berlin, Germany in 1990s and introduced to Korea in 1999. It is the ratio of the uncovered soil areas which have the natural circulating capability compared to whole development areas. This study seeks for alternative ways to increase Biotope Area Ratio of residential areas in the metropolitan areas of Korea by investigation on new housing developments. The study investigates four new towns including Seoul Eunpyung new town, Yongin Kusung district, Goyang Pungdong and Juyeopdong districts and Hwasung Dongtan district. The Biotope Area Ratio of study sites is between 23.51 % and 40.69%. This result is not relevant to land use conditions, such as the building-ta-land ratio, natural ground green area ratio. This ratio satisfies the minimum requirements of City of Seoul, except 2 sites. Considering that the study sites are relatively low density land use areas compared to Seoul's average, thus, a higher standards is necessary for new town housing complexes. Because Biotope Area Ratio includes artificial ground green area ratio, Biotope Area Ratio is possible can be increased with decreased natural ground green area ratio. And so, when Biotope Area Ratio is applied to new town development, it must go side by side with a definite natural ground green area ratio.

• 경영과학
• /
• 제25권2호
• /
• pp.73-80
• /
• 2008

The location area planning is to assign cells to the location areas of a wireless communication network in an optimum manner. The two important cost components are cost of location update and cost of paging that are of conflicting in nature; i.e., minimizing the registration cost might increase the search cost. Hence, it is important to find a compromise between the location update and paging operations such that the cost of mobile terminal location tracking cost is a minimum. The complete mobile network is divided into location areas. Each location area consists of a group of cells. In fact this is shown to be an NP-complete problem in an earlier study. In this paper, we use an ant colony optimization method to obtain the best/optimal group of cells for a given a network.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2004년도 추계학술대회 및 정기총회
• /
• pp.3-7
• /
• 2004

There are some limitations in the analysis and evaluation for area traffic control systems. The area traffic is consist of several intersections interconnected which are very complicated and many traffic strategy are adopted for the control system. This paper features an effective area traffic control system by High Level Architecture(HLA) which is a new developed simulation tool. In this paper, we discuss the design of HLA-based area traffic control simulation. We describe technical motivations for the HLA, the key elements of the architecture and how they are minimum and essential to the goal of reuse and interoperability in simulation arena.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.24-29
• /
• 2002

In any rapid prototyping process, the layer by layer building process introduces an area error between the staircase and the surface line specified by the computer-aided design model. This affects the dimensional accuracy as well as the surface finish for different part build orientations. This paper describes a methodology for computing the area error for any orientation of the part built by the fused deposition modelling system. This technique can be applied to determine the best build orientation of the part, based on the minimum area error. This technique is verified by comparing the results with the experimental measurements of the area error of the parts built at different orientations.