• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 추계종합학술대회 B
• /
• pp.171-174
• /
• 2008

본 논문에서는 2단 인버터를 사용한 고성능 연계형 인버터의 구성을 제안하였다. 2단 인버터에서 하나의 인버터는 연계전압과 동일한 전압을 생성하고, 다른 하나의 인버터는 연계 전압에 포함되어 있는 고조파 성분을 제거하기 위한 전압을 생성한다. 본 논문의 제안된 구조는 PSIM 시뮬레이션으로 통해 확인하였으며, 그 결과 기본파(60Hz) 전압만 남게 되어 양질의 정현적인 전류를 연계 할 수 있음을 보였다.

• 한국기계가공학회지
• /
• 제11권4호
• /
• pp.1-6
• /
• 2012

This paper addresses the issue of Renewable Energy for Electricity Storage device is one of the NAS (Sodium-Sulfur) battery will be about the module. For safety reasons, not the actual battery cells using a dummy cell in the module's operating temperature setting to examine the characteristics of the insulation vacuum of the wall temperature and external temperature changes measured over time. Upper and lower boundaries of the wall vacuum insulation characteristics cotton C intervals over time, average $5^{\circ}C$, but the temperature is rising, 4C section with little temperature change did not occur. On the other hand, about $3^{\circ}C$ in section 4D, and it was confirmed that the temperature rises. Wall vacuum insulation characteristics over time to look at the experiments and measurements are described.

• 한국재난정보학회 논문집
• /
• 제4권2호
• /
• pp.124-136
• /
• 2008

The systematic information management of chemical accidents has been required as a tool for the policy making, system improvement and release of information concerning accident prevention. However, there is not yet a systematic chemical accidents tracking system in Korea, which make confusion among the related government agencies and the parties to accidents that the related statistics are different from each others. In this study, We developed the Chemical Accident Tracking System (CATS) using chemical accident classification which was made up of 12 upper classes, 70 middle classes, 272 lower classes. The CATS is mainly consist list up module, reporting module, searching and statistic module, etc. The CATS is expected to be applied to the information tracking and database system for chemical accidents and improve its manageability.

• Design & Manufacturing
• /
• 제12권1호
• /
• pp.31-35
• /
• 2018

The peltier thermoelectric module are used to cool the heat generated by electronic equipment. In order to increase the efficiency of the peltier thermoelectric module, the heat must be released to the outside. A heat sink is used to discharge such heat to the outside. in this paper, two types of heat sinks with internal tunnels were designed. And the heating and cooling performance of the heat sink with internal tunnel structure was compared and analyzed through ANSYS. The heat sink of the A type had better heat transfer than the heat sink of the B type. Which is about 70% improved.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2556-2558
• /
• 2002

In this paper, the design guideline of communication interrace module for home-appliances is proposed. The requirements of the interface between white-goods and communication module are analyzed. Finally, the proposed interface structure is implemented using PLC technology.

• Journal of the Optical Society of Korea
• /
• 제13권3호
• /
• pp.304-309
• /
• 2009

We tested the feasibility of measuring fat thickness using a miniaturized chip LED sensor module, testing 12 healthy female subjects. The module consisted of a single detector and four sources at four different source-detector distances (SD). A segmental curve-fitting procedure was applied, using an empirical algorithm obtained by Monte-Carlo simulation, and fat thicknesses were estimated. These thicknesses were compared to computed-tomography (CT) results; the correlation coefficient between CT and optical measurements was 0.932 for bicep sites. The mean percentage error between the two measurements was 13.12%. We conclude that fat thickness can be efficiently measured using the simple sensor module.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.1241-1243
• /
• 1998

This paper presents a basic interposing module system to control nuclear power plant. In this paper, the system consists of master and loop controller. Also that we developed communication module and control logic software.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.475-476
• /
• 2013

In single-phase flyback inverter for grid-connected PV-AC module, power ripple is occurred as two times grid frequency on input capacitor. So, decoupling method has attracted interest recently. Also, power generation of PV depending on irradiation is limited at particular time, so use of energy storage system can increase energy efficiency. In this paper, flyback inverter for grid-connected PV-AC module which can operate decoupling and energy storage functions is proposed and verified by PSIM simulation.

• 전자공학회논문지A
• /
• 제29A권9호
• /
• pp.76-84
• /
• 1992

The DSP silicon compiler consists of language compiler, module generator, placement tool, router, layout generation tools, and simulator. In this paper, The language compiler, the module generator, placement tool, and simulator were developed and provided for the system designer. The language compiler translates the designer's system description language into the intermediate form file. The intermediate form file expresses the interconnections and specifications of the cells in the cell library. The simulator was developed and provided for the behavioral verification of the DSP system. For its implementation, the event-driven technique and the C$^{++}$ task library was used. The module generator was developed for the layout of the verified DSP system, and generates the functional block to be used in the DSP chip. And then the placement tool determines the appropriate positions of the cells in the DSP chip. In this paper, the placement tool was implemented by Min-Cut and Simulated Annealing algorithm. The placement process can be controlled by the several conditions input by the system designer.

• 한국국방경영분석학회지
• /
• 제31권2호
• /
• pp.105-115
• /
• 2005

To ensure interoperability among TADILs, we need inter-operational system of tactical data link that allows sharing of specific, planned information among different TADILs. In this paper, we have proposed the design of a conceptual software architecture of inter-operational system. For developing of a conceptual software architecture, we analyze the actual condition of ADSI used in the US military and identify functions and quality-attributes. Based on these factors, we design the conceptual software architecture for inter-operational system of tactical data link using Attribute-Driven Design(ADD) method. ADD is consist of three phases - choose the module to decompose, refine the module, repeat the steps for every module that needs further decomposition. To evaluate of ADD results, we apply the Software Architecture Analysis Method(SAAM) which is consist of making evaluation scenarios, choosing indirect scenarios, evaluation scenarios' interaction, and creating an overall evaluation. Through the evaluation, we verify the conceptual software architecture of inter-operational system.