• Title/Summary/Keyword: MIN

Search Result 126,266, Processing Time 0.098 seconds

The Treatment of Cyanide by Electro-Oxidation (전기산화를 이용한 Cyanide의 처리)

  • Kim, Hong-Tae;Lee, Young-Do;Kim, Kyu-Choul;Kim, Hak-Seok;Chun, Bong-Jun;Ku, Bong-Hun
    • Journal of Environmental Science International
    • /
    • v.17 no.3
    • /
    • pp.335-342
    • /
    • 2008
  • This study based on electro-coagulation & oxidation reaction is applied to wastewater treatment. Electro-oxidation reaction is used to remove cyanide(CN) which is contained in plating wastewater. Cyanide is transferred by gases such as $NH_3,\;NO_x,\;CO_2$. Analysis result and removal efficiency of Cyanide which is contained in heavy metal wastewater of plating plant, are shown as following paragraph. In electrode arrangement experiment, removal efficiency of carbon electrode(-)/STS316L electrode(+) arrangement method is superior to carbon electrode(-)/carbon electrode(+) arrangement method. Removal efficiencies of cyanide in different HRT such as 30 min, 45 min, 60 min, 75 min and 90 min are 85.5%, 93.1%, 98.0%, 98.7% and 99.4% respectively in carbon electrode(-)/STS316L electrode(+) arrangement method. Finally we can estimate the critical point at HRT of 60 min which the variation of removal efficiency is decreased and HRT to obtain removal efficiency of less than 1 mg/LCN is minimum 90 min.

Analyses of Essential Oil Components and Contents in Artemisia sp According to Heat Treatments (가열처리 방법에 따른 쑥의 정유 성분 및 함량 분석)

  • Kim, Choong-Ho
    • Culinary science and hospitality research
    • /
    • v.17 no.4
    • /
    • pp.273-284
    • /
    • 2011
  • The essential oil obtained by steam distillation from a medicinal plant of Artemisia princeps. The essential oil was analyzed by GC-MS. The heat treatments in roasted condition of temperatures were $80^{\circ}C$, $110^{\circ}C$, and $230^{\circ}C$, and the lengths of the time were 6 min, 10 min, and 14 min, respectively. The blanching conditions($100^{\circ}C$) of the treatments lasted 1 min, 2 min, and 5 min while the times of oven dry ($50^{\circ}C$) was 5 min. As the result, the essential oil content of the control plot was higher than the others, and that of the roasted ones was the second highest in low temperature with short treatment time. The major components were eucalyptol, cyclohexadience, phenol, terpineol, and caryopbyllene.

  • PDF

Central nervous system depressant activity of Leucas aspera root

  • Rahman Shafiur;Sarder Mokaddez;Ali Yusuf;Rashid Abdur
    • Advances in Traditional Medicine
    • /
    • v.6 no.3
    • /
    • pp.174-178
    • /
    • 2006
  • The ethanolic extract of Leucas aspera root was studied for its effect on the central nervous system (CNS) using pentobarbitone induced sleeping time test, the open field test and the hole cross test in Swiss albino mice. The present investigation revealed that the extract at the doses of 250 and 500 mg/kg, significantly prolonged the pentobarbitone induced sleeping time in mice though the onset of sleep was delayed as compared to control. In open field test the depressing effect was prominent from the second observation period (30 min) and persisted throughout the entire experimental period (240 min). In the hole cross test, the depressing effect was observed significant from the third observation period (60 min) and persisted up to the seventh observation period (240 min) except at fourth observation (90 min) for 250 mg dose group and depressing effect was significant from second observation (30 min) up to seventh observation period (240 min) for 500 mg dose group. These results support the finding that Leucas aspera root may contain biologically active constituent(s) having CNS activity.

A study on the machinability of SUS304

  • Lim, K.Y.;Yu, K.H.;Seo, N.S.
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.10 no.1
    • /
    • pp.34-41
    • /
    • 1993
  • SUS304 is wellknown as difficult-to-machine materials. It is easy to appear workhardened, and workhardening is one of the causes of groove wear on the tool. In this paper, the author would like to compare the width of flank wear with that of groove wear, and to find whether the groove wear can be used as a criterion of a tool life. The design of the twelve tests provides three levels for each variable (speed: 200m/min, 118m/min, 70m/min; feed: 0.3mm/rev, 0.17mm/rev, 0.1mm/rev; depth of cut: 0.4mm, 0.28mm, 0.2mm). The study of tool-life testing by statistical technique follows usual most scientific sequence. So the tool-life predicting equation is calculated by the method of least squares. The overall adequacy of the model can be verified by the analysis of variance. The results obtained are as follows : 1) When SUS304 is cut in 200(m/min), the width of flank wear is much larger than that of groove wear. 2) In cutting speed 118m/min, flank wear is a little larger than groove wear and in the cutting speed 70m/min, the latter is a little larger so that it is reasonable to determine the tool life according the crierion by groove wear in the low cutting speed (less than 70m/min). 3) Owing to the burr the depth of engagement along the cutting edge is extended toward the shank.

  • PDF

The Effect of Tumbling Time on the Quality and Binding Ability of Restructured Beef M. Pectoralis profundus with Alginate Binder

  • Moon, S.S.;Yang, H.S.;Park, G.B.;Joo, S.T.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.20 no.3
    • /
    • pp.418-423
    • /
    • 2007
  • Meats with alginate binders including sodium alginate, glucono-delta-lactone and calcium carbonate were tested in restructured steaks made from M. pectoralis profundus of beef steers in terms of meat quality and binding ability by tumbling time. The treatment with 25 min tumbling time was significantly lower (p<0.05) for crude protein than 5 and 15 min, while higher (p<0.05) for moisture content. This corresponded with sensory panel juiciness ratings, which showed the treatment for longer tumbling times to be significantly juicier (p<0.05) than that for a shorter time. Cooking loss decreased (p<0.05) linearly with an increased tumbling time, and Kramer shear force also significant decreased (p<0.05) with tumbling time. This corresponded with sensory panel tenderness ratings, which showed that the treatment for longer tumbling times was more tender (p<0.05). The texture results indicated that longer tumbling time had lower (p<0.05) hardness and chewiness values. Sensory panels ranked binding ability in the order 5 min, 15 min and 25 min from best to worst, and the overall acceptability for slices from roasts of treatments for 5 and 15 min were rated by the sensory panelists as moderate to very acceptable, but those for 25 min were rated as fair to moderate.

Effect of renal ischemia on amino acid transport in rabbit renal cortical slices (신장 허혈이 토끼 신피질 절편에서 아미노산 이동에 미치는 영향)

  • Nam, Yun-jeong;Kim, Joo-heon
    • Korean Journal of Veterinary Research
    • /
    • v.37 no.1
    • /
    • pp.111-117
    • /
    • 1997
  • This study was carried out determine the effect of renal ischemia on amino acid transport in rabbit renal cortical slices. The animal models of renal ischemia induced experimentally by clamping the renal artery. These results were summarized as follows: 1. The uptake of amino acids lysine and ${\alpha}$-aminobutyrate(AIB), dicarboxylate succinate and organic anion PAH in cortical slices was normal or increased after 30 or 60 min of ischemia in vivo. 2. In a 30 min ischemic kidney, the slice uptake of amino acids was returned to the control level by 30 min of reflow. In a 60 or 90 min ischemic kidney, the lysine uptake was returned to the control level after of reflow, but the uptake of AIB and succinate was significantly reduced during reflow period of 30-120 min. 3. Oxygen consumption in cortical slices was increased after 30 min of ischemia but was not altered by 60 min of ischemia. This results indicat that transient ischemia caused increasing of amino acid uptake in renal cortical slices without metabolic disorder of renal proximal tubule.

  • PDF

Evaluation of Advanced Oxidation Process(AOP) as a Pretreatment Process of Biological Activated Carbon in Drinking Water Treatment (정수처리에서 생물활성탄의 전처리로서 고급산화처리법의 평가)

  • Kim Woo-Hang
    • Journal of Environmental Science International
    • /
    • v.8 no.6
    • /
    • pp.725-730
    • /
    • 1999
  • The advanced oxidation process (AOP) using ozone combined with hydrogen peroxide and ultraviolet treatment were evaluated for biodegradable dissolved organic carbon (EDOC) formation and dissolved organic carbon (DOC) removal. Oxidation treatment were conducted alone or combination with ozone, hydrogen peroxide and ultraviolet processes. Ozone dosage of ozone process was varied from $0.5mg/l{\ell}\cdot}min$ to $5mg/{\ell}{\cdot}min$. Ozone/hydrogen peroxide process was done using $20mg/{\ell}{\cdot}min$ of hydrogen peroxide concentration. Ozone/ultraviolet process was irradiated with $12mW/cm^2$ of density and 254nm. Ozone dosage was varied from $0.5mg/{\ell}{\cdot}min$ to $5mg/{\ell}{\cdot}min$ at the ozone/hydrogen peroxide and ozone/ultraviolet processes too. Contact time of all the process was 20 minutes. Oxidation treatment were performed on microfiltration effluent samples. BDOC formation was reached to an optimum at ozone dosage of $1.5mg/{\ell}{\cdot}min$ in the ozone/hydrogen peroxide process and $1mg/{\ell}{\cdot}min$ in ozone/ultraviolet process, after which BDOC formation was decreased at higher ozone dosages. But BDOC formation was increased with ozone dosages increasing in ozone process. The efficiency of DOC removal was higher AOPs than ozone process. Ozone/ultraviolet proces was the highest for DOC removal efficiency in each process. THMFP. removal efficiency by ozone/ultraviolet process was higher than that by each of ozone process and ozone/hydrogen peroxide process.

  • PDF

The Effect of Oxidation Heat Treatment on Porcelain to Metal Bond Strength (도재용착주조관용 비귀금속 합금의 사전 열처리가 도재-금속의 결합 강도에 미치는 효과)

  • Kim, C.Y.;Nam, S.Y.
    • Journal of Technologic Dentistry
    • /
    • v.19 no.1
    • /
    • pp.37-42
    • /
    • 1997
  • The interfacial bond strengh and microstructural analysis of pre-heat treated porcelain-fusedmetal(PFM) were investigated using a mechanical three-point bending tester and scanning electron microscope(SEM). Four kinds of heat treated samples were prepared as follows ; A: Heating $1200^{\circ}F{\to}1600^{\circ}F$, holding 1min, reheating ${\to}1850^{\circ}F$, hold 3min under vacuum, B: heating $1200^{\circ}F{\to}1600^{\circ}F$, holding 1min, reheating${\to}1850^{\circ}F$ under vacuum conditon, C: heating $1200^{\circ}F{\to}1600^{\circ}F$, holding 1min, reheating${\to}1850^{\circ}F$, holding 3min in the air, repeat same heat treatment process under vacuum condition, D: heating $1200^{\circ}F{\to}1600^{\circ}F$, holding 1min, reheating${\to}1850^{\circ}F$, holding 1min in the air. The three-point bening test result shows that the interfacial bond strength of specimen B and C were higher than that of A and D. The SEM study indicate that Specimen C shows the highest surface density.

  • PDF

A Study of the influence of stimulus on newborn infant생s response -Specifically in heart rate change- (감각적 자극에 따른 신생아 반응에 관한 연구 -심박동수를 중심으로-)

  • 이자형;하영수
    • Journal of Korean Academy of Nursing
    • /
    • v.13 no.3
    • /
    • pp.119-126
    • /
    • 1983
  • Early extra-uterine development of the newborn infant has the potential for clarifying important questions of nature and care taking environment. In this study, tactile and auditory stimulation is used on .a group of infants to determine the effects of their response. Infants were tested by EKG at 24∼48 hrs after birth ana all they are free from complication. Stimuli presented were-touch and sound (40dB, 70dB and 40∼70dB). The result of the study were as follows: 1) The heart rate was seen to depend on their sleep-wake state. (light sleep ; 125/min, eyes: open & motor activity increase ; 151/min crying ; 185/min). 2) The heart rate affected by tactile & auditory stimulus. The heart rate response was acceleration above the prestimulus level. (tactile, 231min increase, auditory ; 16∼21/min increase), and heart rate change was seen to depend on prestimulus rate. (γ=.73) 3) There was a decrease in heart rate when they were soothe. (touch ; 24.8sec, 21/min decrease, pacifier ; 14.5sec, 26/min decrease) and significant difference in time between touch and pacifier (t= 1.76, p<0.05). This result support the evaluation of newborn infant's sensory abilitics, and has even begin to influence changes in nursing care. But systemic monitoring of newborn infants response would. further define.

  • PDF

Effects of Cooking Time and HTST Air Dehydration Time on Physical Propertiesof Driet Green Peas

  • 김명환
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.19 no.3
    • /
    • pp.195-200
    • /
    • 1990
  • Effects of cooking time(5-30 min in a pressure cooker) and HTST air dehydratiion time(0-9min at 15$0^{\circ}C$) on physical properties of dried green peas(3% oisture content wet basis) were investigated by determining rehydration ratio rehydration curve browning reaction and puncture force, The rehydration ratio and curve of dried green peas were increased with increa-sing cooking time and HTST air dehydration time. Preheating of the green peas for 30 min in a pressure cooker or for 9 min of HTST air dehydration time prior to 6$0^{\circ}C$ air dehydration recovered a 87.3% of original moisture content of raw green peas in a boiling water for 5 min. The brownin greaction was gradually decreased up to 15 min of cooking time. Puncture pressure of rehydrated green peas treated in a boiling water for 5 min was decreased as the cooking time and HTST air dehydration time were increased and was highly correlated with rehydration (r=-0.956) The effects of cooking time and HTST air dehydration time on rehydration ratio browning reaction and puncture pressure were significantly different at the a=0.01 level except effect of HTST air dehydration time on browning reaction.

  • PDF