• Journal of KIBIM
• /
• v.10 no.3
• /
• pp.12-21
• /
• 2020

From the perspective of the client, the value of information for use in facility management is very low at the point of use. This is because the facility owner, who is a non-professional, cannot accurately request necessary information from the perspective of long-term facility life cycle management. The purpose of this study is to define the information necessary for facility management and to analyze the project operation method to procur this information to the client using BIM. To this end, this study analyzed the role of client and contractor, project delivery process, standards, and submissions in the BIM-based procurement area through USACE Air Force Hospital project case analysis. As a result of the analysis, if the client, who is the subject of facility operation, defines in advance the type and input method of necessary information in the operation stage, the client can receive the BIM optimized for operation from the contractor. The results of this study can be used to establish standards for receiving information necessary for establishment of procurement process and facility management of public institutions considering BIM introduction.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.1
• /
• pp.65-76
• /
• 2015

Objective : The purpose of this study was to analyse the differences in core stability and muscle balance of the pilates Teaser motion according to the surfaces and skills. Methods : There were 10 subjects in this study with 5 being skilled and 5 that were not skilled. The independent variables were surfaces (high elastic & aluminum) and skills (skilled & unskilled). Dependent variables were core stability and muscle balance. Core stability was measured by Force Platform (9872, Switzerland), 3D Imagery (IBS-2000, EXYMA) was used to understand the muscle balance. In order to do the Teaser movement subjects had to lay flat on their back and then lean forward as much as possible and hold the position for 10 seconds. Afterwards, they would lay back down again. A camera (MHS-PM5K, SONY) was used to make 4 phases (take off, recoil forward, holding, recoil backward) during the teaser exercise to analyze movement. In this study quantitative and qualitative analysis was used. For the statistical analysis, 2X2 ANOVA was used to analyze the differences in movement time, X,Y,Z maximum force, center of pressure and angles according to different phases. 2X3 ANOVA was used to analyze the differences in muscle balance via SPSS 18.0. Results : Soft. Elastic mat had a longer holding time, lower Fx/ Fy/ Fz, shorter Fx trajectory, larger angle and shorter gaps in muscle balance than a hard surface in skilled subjects. This was because the mat can help to recruit and then sustain core fine muscles during holding time in the Teaser movement.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.1
• /
• pp.81-94
• /
• 1995

By intergrating technologies for protable computers, radio communications, and computer networking, the Land Mobile Computer Network(LMCN) is supposed to overcome the time and space limitation of present computer communication network. However, because the MHs(mobile hosts) do move any time, the network connectivity is often changed causing temporarily duplicated lost, or out-of-sequenced message delivery as well as frequent communications for maintainning the network connectivity. Previous works solved the problems through message flooding, used also in multicasting, resulting in high communication cost(i.e., number of communication messages). In this paper, new protocols for efficient mobility management and multicasting are proposed. The protocols define location update, handover, and multicasting procedure of a MH over a hierarchical LMCN architecture. The protocol specification is presented, and it is shown that the communication cost of the new protocols is superior to the existing ones in terms of the communication cost.

• Structural Engineering and Mechanics
• /
• v.62 no.5
• /
• pp.619-629
• /
• 2017

This paper focuses on the study of complete dynamic modeling and maximum dynamic load carrying capacity computation of N-flexible links and N-flexible joints mobile manipulator undergoing large deformation. Nonlinear dynamic analysis relies on the Timoshenko theory of beams. In order to model the system completely and precisely, structural and joint flexibility, nonlinear strain-displacement relationship, payload, and non-holonomic constraints will be considered to. A finite element solution method based on mixed method is applied to model the shear deformation. This procedure is considerably more involved than displacement based element and shear deformation can be readily included without inducing the shear locking in the element. Another goal of this paper is to present a computational procedure for determination of the maximum dynamic load of geometrically nonlinear manipulators with structural and joint flexibility. An effective measure named as Moment-Height Stability (MHS) measure is applied to consider the dynamic stability of a wheeled mobile manipulator. Simulations are performed for mobile base manipulator with two flexible links and joints. The results represent that dynamic stability constraint is sensitive when calculating the maximum carrying load. Furthermore, by changing the trajectory of end effector, allowable load also changes. The effect of torsional spring parameter on the joint deformation is investigated in a parametric sensitivity study. The findings show that, by the increase of torsional stiffness, the behavior of system approaches to a system with rigid joints and allowable load of robot is also enhanced. A comparison is also made between the results obtained from small and large deformation models. Fluctuation range in obtained figures for angular displacement of links and end effector path is bigger for large deformation model. Experimental results are also provided to validate the theoretical model and these have good agreement with the simulated results.

• Journal of Korea Society of Industrial Information Systems
• /
• v.8 no.1
• /
• pp.43-54
• /
• 2003

E-Commerce, characterized by the exchange of message, occurs between individuals, organizations, or both. A critical promotion factor of e-Commerce is message authentication, the procedure that allows communicating parties to verify the received messages are authentic. It consists of message unforgery, message non-repudiation, message unalteration, and origin authentication. It is possible to perform message authentication by the use of public key encryption. PGP(Pretty Good Privacy) based on X.400 MHS(Message Handling System) and PKC(Public Key Cryptosystem) makes extensive use of message exchange. In this paper we propose, design and implement NMAP(New Message Authentication Protocol), an applied public information based encryption system to solve the message authentication problem inherent in public key encryption such as X.400 protocol and PGP protocol and were to cope with the verification of NMAP using fuzzy integral. This system is expected to be use in the promotion of the e-Commerce and can perform a non-interactive authentication service.

• The Journal of Internal Korean Medicine
• /
• v.22 no.3
• /
• pp.383-391
• /
• 2001

목적 : 본 연구는 목향순기탕(木香順氣湯)이 인간의 장관상피세포 계열인 Caco-2 세포에서 항산화작용을 증진시키는 효과가 있는지 검증하기 위한 실험이다. 방법 : 배양된 인간장관 세포계열인 Caco-2 세포에서 세포의 사망은 trypan blue의 소실정도에 의해 평가했으며 $H_2O_2$는 표본산화제로 사용되었다. 결과 : $H_2O_2$에서 노출된 세포들은 용량에 비례하여 세포 사망하는 결과를 보였다. 목향순기탕(木香順氣湯)은 $H_2O_2$에 의해 유발된 세포사망을 방지하였고, 0.05-1%의 농도범위에 걸쳐서 효과가 극대화되었다. 목향순기탕(木香順氣湯)과 강력한 항산화제인 DPPD는 $H_2O_2$에 의해 억제된 SOD의 활성에는 영향을 주지는 못했다. 그러나 $H_2O_2$에 의해 유발된 catalase, glutathione peroxidase, hydroperoxide 탈취효소의 활성이 감소되는 것을 억제하였다. 또한 $H_2O_2$에 의해 유발된 glutathione의 감소는 목향순기탕(木香順氣湯)과 DPPD에 의해 억제되었다. 목향순기탕(木香順氣湯)은 $H_2O_2$에 의해 유발된 ATP의 소실을 회복시켰지만 DPPD는 ATP 소실을 회복시키지 못하였다. 결론 : 이러한 결과로 볼 때 Caco-2세포에서 목향순기탕이 세포사망을 억제하는 것은 다른 기전을 통하여 항산화작용을 하는 것으로 볼 수 있다. 따라서 본 연구는 목향순기탕(木香順氣湯)이 반응성산소기에 의해 유발된 인체 위장관질환의 치료에 사용할 수 있을 가능성을 제시하고 있다.

• Journal of Nutrition and Health
• /
• v.26 no.2
• /
• pp.119-130
• /
• 1993

This study was carried out to investigate the effects of dietary lipid sources and meal frequency on growing performance and lipid metabolism in Sprague-Dawley strain male rats. The experiment was conducted in 4$\times$2 factorial arrangement with 4 sources of dietary lipid(palm oil, beef tallow, soybean oil and hydrogenated soyben oil) and 2 meal frequencies(ad-libitum or meal feeding). During the 4-week feeding period the rats were fed either ad-libitum (AL) or a single daily 3-hour meal (09 : 02-12 : 00) during the dark period. In vitro cultures were carried out to study the cholesterol synthetic activity in hte liver prepared from rats used in feeding trials. And in vitro cultures were also carried out to study the lipogenic and lipolytic activity in the liver and adipose tissues prepared from rats used in feeding trials. Present data indicated that body weight gain, feed intake and FER of AS(ad-libitum+soybean oil)and AHS(ad-libitum+hydrogenated soybean oil) group were significantly(p<0.05) higher than those of the other groups. It was found that the feed intake of MF group was much less than that of AL group. Total body weight gained by MF group was only 60% of AL group. Growing performance was not affected by dietary lipid sources. The cholesterol synthetic activity in liver tissues culture was markedly(p<0.05) increased in MF diets, especially in soybean oil group. The lipogenic activity in liver tissues culture of MP(meal feeding+palm oil) and MHS(meal feeding+hydrogenated soybean oil)group was significantly (p<0.05) higher than that of AP(ad-libitum+palm oil) group and AHS(ad-libitum+hydrogenated soybean oil) group(p<0.05). Rats fed ad-libitum+beef tallow and fed meal feeding+beef tallow showed significantly(p<0.05) higher lipogenesis than the other groups. It was apparent that the lipogenic activity in liver tissues culture was not affected by dietary lipid sources and meal frequency. Lipolytic activity in liver tissue culture was significantly(p<0.001)different with meal frequency; MF group was higher than AL group, but was not greatly affected by dietary lipid sources. In the in vitro studies with adipose tissue, MF diets increased the lipogenic activity and inhibited the lipolytic activity in adipocytes. The lipogenic activity in adipocytes was significantly (p<0.001) different with dietary lipid sources and found to be beef tallow group was the higherst, but the sources of lipid in the diet did not exert any effect on the lipolytic acitivity.

• Korean Journal of Environmental Biology
• /
• v.40 no.4
• /
• pp.413-422
• /
• 2022

Barnea manilensis is a bivalve which bores soft rocks, such as, limestone or mudstone in the low intertidal zone. They make burrows which have narrow entrances and wide interiors and live in these burrows for a lifetime. In this study, the morphology and the microstructure of the valve of rock-boring clam B. manilensis were observed using a stereoscopic microscope and FE-SEM, respectively. The chemical composition of specific part of the valve was assessed by energy dispersive X-ray spectroscopy (EDS) analysis. 3D modeling and structural dynamic analysis were used to simulate the boring behavior of B. manilensis. Microscopy results showed that the valve was asymmetric with plow-like spikes which were located on the anterior surface of the valve and were distributed in a specific direction. The anterior parts of the valve were thicker than the posterior parts. EDS results indicated that the valve mainly consisted of calcium carbonate, while metal elements, such as, Al, Si, Mn, Fe, and Mg were detected on the outer surface of the anterior spikes. It was assumed that the metal elements increased the strength of the valve, thus helping the B. manilensis to bore sediment. The simulation showed that spikes located on the anterior part of the valve received a load at all angles. It was suggested that the anterior part of the shell received the load while drilling rocks. The boring mechanism using the amorphous valve of B. manilensis is expected to be used as basic data to devise an efficient drilling mechanism.

• Journal of KIISE:Computer Systems and Theory
• /
• v.28 no.1_2
• /
• pp.80-89
• /
• 2001

The development in the mobile computing systems have arisen new and previously unforeseen problems, such as problems in information management of mobile host, disconnection of mobile host and low bandwidths of wireless communications. Especially, location information management strategy of mobile host results in an increased overhead in mobile computing systems. Due to the mobility of the mobiles host, the changes in the mobile host's address depends on the mobile host's location, and is maintained by mapping physical address on virtual address, Since previously suggested several strategies for mapping method between physical address and virtual address did not tackle the increase of mobile host and distribution of location information, it was not able to support the scalability in mobile computing systems. Thus, to distribute the location inrormation, we propose an advanced n-depth LiST (Location information Search Tree) and the parallel location search and update strategy based on the advanced n-depth LiST. The advanced n-depth LiST is logically a hierarchical structure that clusters the location information server by ring structure and reduces the location information search and update cost by parallel seatch and updated method. The experiment shows that even though the distance of two MHs that communicate with each other is large, due to the strnctural distribution of location information, advanced n-depth LiST results in good performance. Moreover, despite the reduction in the location information search cost, there was no increase in the location information update cost.

• The KIPS Transactions:PartC
• /
• v.9C no.2
• /
• pp.247-256
• /
• 2002

In a wireless multicasting when a mobile host moves to the new bate station being in the same multicast group it needs to exchange information about data delivery between base stations to receive data from the new base station at once. However it is inefficient to use the existence schemes because it takes too much time to exchange information and many overheads. The next, a mobile host moving to the base station not being in the same multicast group, the old base station will pre-forward data to neighboring base stations to avoid transmission delay. However, if other mobile hosts move at short interval, the old base station may retransmit the same data to the same neighboring base stations. In this paper we proposed called Information Exchange Scheme (IES). In IES in the same multicast grope the base stations exchange information locally so it takes the minimum time and overheads to use IES. Also in IES the neighboring base stations delay to delete data for continuous moving of other MHs. We also present how our scheme is efficient by producing cost ad simulating.