• 천문학회보
• /
• 제40권1호
• /
• pp.65.2-65.2
• /
• 2015

We developed a three-dimensional magnetohydrodynamic (MHD) code to reproduce the structure of a solar wind, the properties of a coronal mass ejection (CME) and the interaction between them. This MHD code is based on the finite volume method incorporating total variation diminishing (TVD) scheme with an unstructured grid system. In particular, this grid system can avoid the singularity at the north and south poles and relax tight CFL conditions around the poles, both of which would arise in a spherical coordinate system (Tanaka 1994). In this model, we first apply an MHD tomographic method (Hayashi et al. 2003) to interplanetary scintillation (IPS) observational data and derive a solar wind from the physical values obtained at 50 solar radii away from the Sun. By comparing the properties of this solar wind to observational data obtained near the Earth orbit, we confirmed that our model captures the velocity, temperature and density profiles of a solar wind near the Earth orbit. We then insert a spheromak-type CME (Kataoka et al. 2009) into the solar wind to reproduce an actual CME event. This has been done by introducing a time-dependent boundary condition to the inner boundary of our simulation domain. On the basis of a comparison between a simulated CME and observations near the Earth, we discuss the physics involved in an ICME interacting with a solar wind.

• 대한수학회보
• /
• 제47권2호
• /
• pp.231-249
• /
• 2010

Asymptotic behavior of three-dimensional mixed, periodic and rotating magnetohydrodynamic system is investigated as the Rossby number goes to zero. The system presents the difficulty to be singular and mixed, that is hyperbolic in the vertical direction and parabolic in the horizontal one. The divergence free condition and the spectral properties of the penalization operator are crucial in the proofs. The main tools are the energy method, the Schochet's method and products laws in anisotropic Sobolev spaces.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 PARALLEL CFD 2006
• /
• pp.367-367
• /
• 2006

• Nuclear Engineering and Technology
• /
• 제21권1호
• /
• pp.32-39
• /
• 1989

원형 단면을 가진 축대칭형 토카막 핵융합로에 적합할 수 있는 최적의 이상적 자기유체역학 베타값과 운전조건의 결정 방법을 제시하였다. 토로이달 전류밀도 분포로 조정되는 운전조건을 변화시키면서 이상적 자기유체역학 안정성을 유지시킬 수 있는 베타값의 한계를 계산하였다. 토로이달 전류밀도 분포에는 실험적 관찰들로부터 얻은 실험식들이 사용되었고, 베타 값의 한계를 결정하기 위해 필요로 여러 식들이 이 실험식들로부터 유도되었다. 토로이달 전류밀도의 각각 다른 분포에 대해서 다양한 베타 한계값 분포들이 얻어졌다. 이상적 자기 유체 역학 불안정성들에 의해 제안받는 최대의 베타값을 토카막의 기하학적 변수와 안전인자에 의한 scaling law로 표현하였다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제19권1호
• /
• pp.83-102
• /
• 2015

The present paper analyses the radiation effects of mass transfer on steady nonlinear MHD boundary layer flow of a viscous incompressible fluid over a nonlinear porous stretching surface in a porous medium in presence of heat generation. The liquid metal is assumed to be gray, emitting, and absorbing but non-scattering medium. Governing nonlinear partial differential equations are transformed to nonlinear ordinary differential equations by utilizing suitable similarity transformation. The resulting nonlinear ordinary differential equations are solved numerically using Runge-Kutta fourth order method along with shooting technique. Comparison with previously published work is obtained and good agreement is found. The effects of various governing parameters on the liquid metal fluid dimensionless velocity, dimensionless temperature, dimensionless concentration, skin-friction coefficient, Nusselt number and Sherwood number are discussed with the aid of graphs.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제20권4호
• /
• pp.355-374
• /
• 2016

This work is devoted to investigate heat and mass transfer effects on MHD natural convection flow past an inclined plate with ramped temperature numerically. The dimensionless governing equations for this investigation are solved by using finite element method. The effects of angle inclination, buoyancy ratio parameter, permeability parameter, magnetic parameter, Prandtl number, heat generation, thermal radiation, Eckert number, Schmidt number, chemical reaction parameter and time on velocity, temperature and concentration fields are studied and presented with the aid of figures. The effects of the pertinent parameters on skin friction, rate of heat transfer and mass transfer coefficients are presented in tabular form. The numerical results are compared graphically with previously published result as special case of the present investigation and results found to be in good agreement.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.133-136
• /
• 2008

본 논문에서는 도플러 레이더 센서를 이용하여 전자식 안정기의 조광 제어 기법을 제시하였다. 현재 대형 건물, 터널 및 도로에 설치되어 있는 수많은 안정기들은 조광 제어 없이 항상 정출력을 내고 있어 상당한 에너지 낭비를 초래하고 있다. 또한 장시간 동안 정출력 점등에 의해 램프의 수명을 단축시키는 원인이 되고 있다. 이를 해결하고자 도플러 레이더 센서를 이용한 조광 제어 시스템을 구현하였으며, prototype 400W MHD 램프용 전자식 안정기에 적용한 실험을 통하여 조광 제어 기법의 유용함을 증명하였다.

• Journal of Magnetics
• /
• 제21권2호
• /
• pp.273-280
• /
• 2016

In this paper, the peristaltic flow of Psedoplastic fluid with variable viscosity in an asymmetric channel is examined. The bionic effects by means of magnetohydrodynamics (MHD) are taken into account. The assumptions of long wave length and low Reynolds number are taken into account. The basic equations governing the flow are first reduced to a set of ordinary differential equation by using appropriate transformation for variables and then solve by using perturbation method. The effect of physical parameters on the pressure rise, velocity and pressure gradient are illustrated graphically. The trapping phenomenon is analyzed through stream lines. A suitable comparison has also been made as a limiting case of the considered problem.

• 대한기계학회논문집B
• /
• 제34권6호
• /
• pp.579-586
• /
• 2010

MEMS 기술의 향상과 함께 $\mu$-TAS(Micro Total Analysis System)가 개발 되어 의료 및 생물학 분야가 급속하게 성장했다. $\mu$-TAS의 한 분야로 Chip 위에서 소량의 sample과 반응물을 가지고 혼합공정과 분석공정이 이루어지는 LOC(Lab on a chip)에 관한 연구는 활발하게 연구되어진다. LOC는 마이크로 펌프 와 마이크로 믹서와 같은 microfluidic 장치들로 구성된다. Microfluidic 시스템의 유동이 층류 유동이므로 유체상태의 반응물들을 효율적으로 혼합하고 공급하는 것이 어렵다. 본 논문은 이송 및 혼합이 동시에 이루어지는 MHD micropump의 설계와 제작에 관해 제시하였다. 최종 개선사양은 상용 CFD 프로그램의 해석결과를 통하여 결정하였다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제18권3호
• /
• pp.257-268
• /
• 2014

The objective of the present study is to investigate thermal diffusion and radiation effects on unsteady MHD flow past a linearly accelerated vertical porous plate with variable temperature and also with variable mass diffusion in presence of heat source or sink under the influence of applied transverse magnetic field. The fluid considered here is a gray, absorbing/emitting radiation but a non-scattering medium. At time t > 0, the plate is linearly accelerated with a velocity $u=u_0t$ in its own plane. And at the same time, plate temperature and concentration levels near the plate raised linearly with time t. The dimensionless governing equations involved in the present analysis are solved using the closed analytical method. The velocity, temperature, concentration, skin-friction, the rate or heat transfer and the rate of mass transfer are studied through graphs in terms of different physical parameters like magnetic field parameter (M), radiation parameter (R), Schmidt parameter (Sc), Soret number (So), Heat source parameter (S), Prandtl number (Pr), thermal Grashof number (Gr), mass Grashof number (Gm) and time (t).