• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.118-121
• /
• 2003

A new approach, using MEMS, for improving the performance of high efficiency amplifiers is proposed in this paper. The MEMS tuning element is described as a variable-length shorted CPW stub. Class-E amplifiers can be optimally tuned by these MEMS tuning elements because their operation varies with the impedance of the output tuning circuit. A MEMS tuning element was simulated using full-wave EM simulators to obtain its S-parameters. A Class-E amplifier with the MEMS was designed at 8GHz. The non-linear operation of this amplifier was simulated to explore the effect of the MEMS tuning. Comparing the initially designed amplifier without MEMS, the Power Added Efficiency (PAE) of the amplifier with MEMS is improved from 46.3% to 66.9%. For the amplifier with MEMS, the nonlinear simulation results are PAE = 66.90%, $\eta$(drain efficiency) = 75.89%, and $P_{out}$ = 23.37 dBm at 8 GHz. In this paper, the concept of the MEMS tuning element is successfully applied to the Class E amplifier designed with transmission lines.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.88-91
• /
• 2005

Although the MEMS element is made through a very precise manufacturing process, usually there is the difference between the modeling design and the actual product. So tuning is required. Through the frequency tuning(changing the characteristics of device), we can calibrate the fabrication error and uncertainty. I'll propose the method of changing the natural frequency through the imposing the axial force on the anchor part to separate the sensing part and the tuning part. When the shape of section is the form of rectangular, the degree of the natural frequencies' change under axial force appears D be different. Applying a tuning force of 30 $\mu$N, the natural frequencies' difference can be reduced by 5 percent.

• 한국전자파학회논문지
• /
• 제24권12호
• /
• pp.1113-1119
• /
• 2013

본 논문에서는 다중 입출력(Multiple-Input Multiple-Output: MIMO) 무선 기계에 대한 안테나의 설계를 제안하였다. 제안된 안테나는 다양한 LTE(Long Term Evolution) 서비스 대역을 다룬다; 밴드(band) 17(704~746 MHz), 밴드 13(746~787 MHz), 밴드 5(824~894 MHz), and 밴드 8(880~960 MHz). 제안된 주(main) 안테나는 광대역 동작을 위해 역 L-형태의 슬릿(slit)을 가지고 있다. 그리고 LTE 부(sub) 안테나는 스위치(switch)를 결합한 루프(loop) 안테나 구조에 기초를 두었고, 논리 회로에 의해서 공진 주파수가 조절될 수 있다. LTE 수신 안테나에 대한 조절 기술은 원하는 대역의 실현을 위해, 그리고 임피던스(impedance) 조절을 위해 RF MEMS(Micro-Electro Mechanical System)를 사용하였다. 두 개의 제안된 안테나는 서로 수직으로 편파되기 때문에 원하는 주파수 대역에서 두 안테나는 -20 dB 이하의 격리도 특성을 가지며, 두 안테나 사이의 상관 계수(Envelope Correlation Coefficient: ECC) 특성은 0.06 이하의 매우 낮은 값을 가진다. 제안된 안테나는 통합된 LTE 다중 입출력 시스템의 단말기에 적용이 가능하다.

• 센서학회지
• /
• 제21권2호
• /
• pp.114-120
• /
• 2012

This paper describes the design, fabrication and testing of a micromachined resonant accelerometer consisting of a symmetrical pair of proof masses and double-ended tuning fork(DETF) oscillators. Under the external acceleration along the input axis, the proof mass applies forces to the oscillators, which causes a change in their resonant frequency. This frequency change is measured to indicate the applied acceleration. Pivot anchor and leverage mechanisms are adopted in the accelerometer to generate larger force from a proof mass under certain acceleration, which enables increasing its scale factor. Finite element method analyses have been conducted to design the accelerometer and a silicon on insulator(SOI) wafer with a substrate glass wafer was used for fabricating it. The fabricated accelerometer has a scale factor of 188 Hz/g, which is shown to be in agreement with analysis results.