• Transactions on Electrical and Electronic Materials
• /
• v.14 no.4
• /
• pp.187-192
• /
• 2013

Because of the importance of small target detection in infrared images, many studies have been carried out in this area. Using a Kalman filter and mean shift algorithm, this study proposes an algorithm to track multiple small moving targets even in cases of target disappearance and appearance in serial infrared images in an environment with many noises. Difference images, which highlight the background images estimated with a background estimation filter from the original images, have a relatively very bright value, which becomes a candidate target area. Multiple target tracking consists of a Kalman filter section (target position prediction) and candidate target classification section (target selection). The system removes error detection from the detection results of candidate targets in still images and associates targets in serial images. The final target detection locations were revised with the mean shift algorithm to have comparatively low tracking location errors and allow for continuous tracking with standard model updating. In the experiment with actual marine infrared serial images, the proposed system was compared with the Kalman filter method and mean shift algorithm. As a result, the proposed system recorded the lowest tracking location errors and ensured stable tracking with no tracking location diffusion.

• Structural Engineering and Mechanics
• /
• v.82 no.4
• /
• pp.517-542
• /
• 2022

The effect of mean angle of wind attack on the flutter critical wind speed of two generic bridge deck cross-sections, viz, one closed box type streamlined section (deck-1) and closed box trapezoidal bluff type section with extended flanges/overhangs (deck-2) type of section have been studied using Computational Fluid Dynamics (CFD) based forced vibration simulation method. Owing to the importance of the effect of the amplitude of forcing oscillation on the flutter onset, its effect on the flutter derivatives and flutter onset have been studied, especially at non-zero mean angles of wind attack. The flutter derivatives obtained have been used to evaluate flutter critical wind speeds and flutter index of the deck sections at non-zero mean angles of wind attack studied and the same have been validated with those based on experimental results reported in literature. The value of amplitude of forcing oscillation in torsional degree of freedom for CFD based simulations is suggested to be in the range of 0.5° to 2°, especially for bluff bridge deck sections. Early onset of flutter from numerical simulations, thereby conservative estimate of occurrence of instability has been observed from numerical simulations in case of bluff bridge deck section. The study aids in gaining confidence and the extent of applicability of CFD during early stages of bridge design, especially towards carrying out studies on mean incident wind effects.

• Journal of Korea Trade
• /
• v.25 no.6
• /
• pp.126-142
• /
• 2021

Purpose - This study discusses the effects of human capital in the formation of GVC linkages. We also investigate GVC intensity between Korea and ASEAN. Design/methodology - To solve the doubling-counting problem in evaluating comparative advantage, RCA has been re-computed using domestic value-added (henceforth RCA_VA) at the country-sector level instead of value of trade. The impact of human capital on GVC intensity was empirically analyzed by establishing a panel data set with four industries (ISIC Rev. 4) in eight ASEAN countries from 2005 to 2015 from OECD-TiVA and WDI. Findings - The empirical results show that human capital has a negative effect on GVC intensity in the agriculture and manufacture industries, while it has a positive effect in the service and information industries. The results do not mean that low human capital is a barrier and inefficient to GVC linkages. Low Value-added activities may be more profitable to some emerging countries. These findings suggest that it is important to accurately identify the competitive elements to increase gains from trade under the GVC. Also, it shows that comparative advantages can be misled by an RCA index evaluated in trade volume under the GVC. Originality/value - This study highlights the importance of human capital as a factor for the efficient formation of Global Value Chain (GVC). This study has different from the literature in analyzing the role of human capital in formation of linkage of the GVC. And we clarify the changing patterns of trade by removing the double-counting problem under the GVC.

• Korean Journal of Human Ecology
• /
• v.6 no.1
• /
• pp.89-96
• /
• 1997

The purpose of this study was to determine the clothing value, awareness of and concern about clothing's country of origin in Korea and England university women. University women in Korea and England were surveyed to determine the importance attributed to 32 descriptors defining 8 clothing values. Awareness of, and concern about, clothing's country of origin were determined mean-scores, t-test and $x^2$-analyses were done. A different rank order of importance for clothing values exists for both groups. The Korea sample rated aesthetic, economic, theorical, political, exploratory and sensory significantly higher and social, religious significantly lower than England sample. England sample appeared to be more aware, concerned about clothing's country of origin than Korea sample. More Korea women were able to recall country of origin. Over half Korea sample but less than 22% England sample recalled purchasing primarily domestic apparel.

• Journal of Korean Society of Rural Planning
• /
• v.20 no.1
• /
• pp.27-36
• /
• 2014

The purposes of this study are to identify assessment items to evaluate riverfront for amenity and recreation and to analyze the relative importance of the items using Analytic Hierarchy Process(AHP). Total 15 items of 5 categories were identified through literature review and panel discussion. Based on the AHP analysis results, a weighted value was set for each of the layers in the hierachy. 'Ecological Characteristics' (0.333) was rated with the highest weighted value. followed by 'Landscape Characteristics'(0.190) and 'Physical Characteristics'(0.166). Among the assessment items, 'Water Quality' (0.152) and 'River Naturality'(0.118) had higher weighted values. With the set of assessment items field assessments were carried out for Gyung-An Stream of Gyeonggi-Do to exam its applicability. Total 6 segments and 31 reaches out of the 22.5 km long river were evaluated and the mean scores of the five categories were converted into a percentile score for comparison. Overall, the segments which had higher scores were located close to neighborhood areas and had better connections with other historical and cultural amenities. Also, existing facilities was an important factor and needs to be considered for waterfront development.

• Journal of the Korean Dietetic Association
• /
• v.3 no.2
• /
• pp.123-140
• /
• 1997

The purpose of this study were to assess main management components that can lead to successful university foodservice operations. Specifically, it was intended to develop the tool which assesses the service quality, management, to assess the difference between customer importance from and perceptions of service quality, to compare management perceptions of customer importances with actual service delivery, and to identify internal problems which affect service quality with the use of gap model. Three types of questionnaires were developed and implemented for customers, foodservice personals and foodservice manager. Assessment tools were developed based on the literature review, SERVQUAL, GAP model, and the pilot study. Through the validity and reliability test, the questionnaires were revised. Questionnaires were distributed to 900 university students, 207 foodservice personnels, and 54 foodservice manager respectively. 831 university students, 177 foodservice personnels, and 48 foodservice manager were responded with a response rate of 92.3%, 85.5%, and 88.8% respectively. Statistical data analysis was completed using the SPSS programs for descriptive analysis, ANOVA. and SNK test. The results of this study can be summarized as follows : 1. In quality service management components, 31 quality service attributes were categorized and named into primary quality, secondary quality, hygiene, empathy, tangibles, reliability, responsiveness, and price by the factor analysis. 2. Importance mean score of customers was 4.02 out of 5, but perception mean score of customers was 2.55. So there was a relative big gap(1.47) between importance and perception scores, especially in three dimensions of responsiveness, primary quality, and hygiene. 3. It showed that customers' mean scores of perceived service quality by dimensions were the following order : price > reliability > secondary quality > hygiene > tangibles > primary quality > responsiveness > empathy. And the perception mean score of rented(2.59) or contracted(2.58) management was significantly higher than that of self-operated(2.48). 4. Customers' importances mean score which internal customers recognize was 4.23 out of 5, but service delivery mean score was 3.85. So there was a little gap(0.39) between management perceptions of customer importances and actual service delivery. 5. In gap model, SERVQUAL score showed -1.47, Gap 1 positive 0.15, gap 2 negative 0.61, and gap 3 was positive 0.19. 6. The internal problems were as follows : (1) The managers of University foodservice perceived well enough the customers' expectation value but their management competency was lacked in terms of responding customer needs, (2) The foodservice staff perceived service performance more highly than service quality specifications.

• Korean Journal of Environment and Ecology
• /
• v.12 no.4
• /
• pp.345-360
• /
• 1999

The purpose of this study was to suggest vegetation management Planning and plant community structure of Camellia Japonica forest at Hakdong, Kojedo, Hallyo-Haesang National Park. Forty-six plots(l00$\m^2$/plot) were established in Camellia japonica forest and surveyed. By DCA ordination technique and mean importance value analysis, the plant communities were classified into four community types, which were Camellia japonica community, Camellia japonica-Eurya japonica community, Camellia japonica-Neolitsea sericea community, Chumaecyparis obtusa-Camellia japonica community. It was supposed that Camellia japonica-Neolitsea sericeu community succeeded to Neolitsea sericea community. The others would not be replaced by another woody species. The vegetation management for successional controls in long-term basis were suggested; for the short-term basis, the species of Chamaecyparis obtusa, Neolitsea sericea and Eurya japonica should be removed. The species of Quercus serrata, Prunus sargentii, Meliosma myriantha, Machilus thunbergii and Litsea japonica. must be controlled under the long-term management of vegetation.

• Structural Engineering and Mechanics
• /
• v.53 no.6
• /
• pp.1127-1141
• /
• 2015

The optimum design of liquid column dampers in seismic vibration control considering system parameter uncertainty is usually performed by minimizing the unconditional response of a structure without any consideration to the variation of damper performance due to uncertainty. However, the system so designed may be sensitive to the variations of input system parameters due to uncertainty. The present study is concerned with robust design optimization (RDO) of liquid column vibration absorber (LCVA) considering random system parameters characterizing the primary structure and ground motion model. The RDO is obtained by minimizing the weighted sum of the mean value of the root mean square displacement of the primary structure as well as its standard deviation. A numerical study elucidates the importance of the RDO procedure for design of LCVA system by comparing the RDO results with the results obtained by the conventional stochastic structural optimization procedure and the unconditional response based optimization.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.6
• /
• pp.779-786
• /
• 1996

The main purpose of this study was to estimate the role of dissolved inorganic nitrogen (DIN) released from sediment and denitrification process in sediment on the nitrogen budget of Hiroshima Bay by means of collecting data on distributions and budgets of nitrogen and phosphorus in the bay, DIN fluxes across sediment-water interface and denitrification rates in the sediments of the same area. The TN : TP and DIN:DIP atomic ratios of the discharged freshwater were about 26 and 21, respectively. The standing stocks in the seawater of the TN : TP atomic ratio varied from 8 to 14 with an annual mean value of 11, while the DIN : DIP atomic ratio varied from 10 to 15 with an annual mean value of 12 in the bay. The residence time of nitrogen and phosphorus were estimated to be about 109 days and 200 days in the bay, respectively. The proportion of DIN released from sediment and denitrification rate to the loading of total nitrogen into Hiroshima Bay were $45\%\;(37\~82\%)\;and\;13\%(0.0\~37\%)$, respectively, and the amount of nitrogen through denitrification process was 6.5 times larger than the outflow of nitrogen from the bay. The results show that DIN released from sediment and denitrification process in sediment play important roles on the nitrogen budget in Hiroshima Bay.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.12
• /
• pp.70-79
• /
• 2020

This paper describes a comparative study of characteristics of probabilistic design using various reliability analysis methods in the structure design of an automatic salt collector. The thickness sizing variables of the main structural member were considered to be random variables, including the uncertainty of corrosion, which would be an inevitable hazard in the work environment of the automatic salt collector. Probabilistic performance functions were selected from the strength performances of the automatic salt collector structure. First-order reliability method, second-order reliability method, mean value reliability method, and adaptive importance sampling method were applied during the reliability analyses. The probabilistic design performances such as reliability probability and numerical costs based on the reliability analysis methods were compared to the Monte Carlo simulation results. The adaptive importance sampling method showed the most rational results for the probabilistic structure design of the automatic salt collector.