• Parasites, Hosts and Diseases
• /
• v.33 no.1
• /
• pp.45-54
• /
• 1995

Two-day-old chickens{\;}and{\;}mallards were orally inoculated with one of % doses varying from $2{\;}{\times}{\;}10^2{\;}to{\;}2{\;}{\times}{\;}10^6$ of C. bailevi oocysts per individual. Generally, the more oocysts Inoculated were, the longer the patent periods were, and the more oocysts shedding were. Meanwhile increasing the inoculative dose, the prepatent periods were shortened except that mallards inoculated with $2{\;}{\times}{\;}10^2and{\;}2{\;}{\times}{\;}10^3$ oocysts foiled to produce the oocysts. The more parasites involving oocysts appeared from the chicken in comparison to the mallard. In the chickens challenged with a single dose of $2{\;}{\times}{\;}10^6$ oocysts, a small number of oocysts were detected from feces on days 4-14 after challenge infection (ACI) in all of carrageenan administered groups and in the control groups inoculated with $2{\;}{\times}{\;}10^2{\;}and{\;}2{\;}{\times}{\;}10^3$ oocysts. In the mallards, a few oocysts were also recognized on days 5-15 ACI in all of carrageenan treated groups and in the control groups inoculated with $2{\;}{\times}{\;}10^2,{\;}2{\;}{\times}{\;}10^3{\;}and{\;}2{\;}{\times}{\;}10^4$ oocysts. Just prior to challenge infection, phagocytic activity of peritoneal macrophages (Me) and the number of peripheral Mc in both birds were significantly decreased in the carrageenan treated groups as compared to the control groups. Mild challenge inection in both birds denoted that the immunogenicity of C. bailelli to the birds was very strong, despite MB blocker carrageenan administration.

• Applied Biological Chemistry
• /
• v.9
• /
• pp.41-57
• /
• 1968

Changes of acids (total, titratable and combined form) and sugars (total, reducing and non-reducing) in the edible part and the rind of 17 varieties the in growing and ripening period were investigated. The results were summarized as follows. 1) The percentage of rind was notably decreased in growing period and slightly in the ripening period- It may suggest that the rates of translocation of metabolite from leaves to each part of fruit are different with growth phase. 2) The heavier the weight of fruit, the higher the percentage of rind was and the varieties having over 200 g per fruit showed the value over 30 in the rind percentage and over 15 in the number seeds per fruit. 3) Total acid contents in the rind were highest at the maximum grow th of fruit except in Citrus grandis having tie lowest value (below 20 me/100 g F.W). of total acid at maximum point in which total acid content is steadily increase. 4) Total acid and titratable acid in the edible part and total acid and combined acid in whole fruit life showed 0.933 and 0.970 of correlation coefficient significant at 1% level respectively, and most acid in the edible part was titratable acid(73%) whereas acid in the rind consists mostly of combined acid. 5) The content of combined acid in the ripening period increased in the edible part and decreased in the rind. It may be contributed to translocation of some cations from the rind to the edible part. 6) The grouping criteria on citrus fruit were applicable on melon, watermelon and tomatoes. 7) The contents of total sugar and non-reducing sugar in the edible part were continuously increased whereas the content of reducing sugar were decreased in certain varieties, notablly in citrus natsudaidai. The correlation coefficient between total sugar and reducing sugar in the edible part with ripening decreased as $0.849^{**},\;0.732^{**}.\;0.583^*$. ( $^{**}$: significant at 1% level and $^{*}:$: at 5%) 8) 61% of total sugar in the edible part was non-reducing sugar whereas 88% of total sugar in the rind was reducing form at the end of ripening and the correlation coefficient between total and non-reducing sugar in the edible part was 0.861 end total and reducing sugar in the rind was 0.972, both significant at 1% level. 9) Varieties having the percentage of the rind below 36 showed higher value than I in the ratio of total sugar in the edible part to one in the rind. It may suggest that there exists any intimate relation between relative sugar content and growth rate of fruit parts. 10) Citrus unshiu in Guje island showed lower values in the content of acid and sugar, and the rind percentage but higher sweetness index (the ratio of total sugar to titratable acid) comparing with the same variety in Jeiu.

• Progress in Medical Physics
• /
• v.20 no.4
• /
• pp.269-276
• /
• 2009

Radiation treatment techniques using photon beam such as three-dimensional conformal radiation therapy (3D-CRT) as well as intensity modulated radiotherapy treatment (IMRT) demand accurate dose calculation in order to increase target coverage and spare healthy tissue. Both jaw collimator and multi-leaf collimators (MLCs) for photon beams have been used to achieve such goals. In the Pinnacle3 treatment planning system (TPS), which we are using in our clinics, a set of model parameters like jaw collimator transmission factor (JTF) and MLC transmission factor (MLCTF) are determined from the measured data because it is using a model-based photon dose algorithm. However, model parameters obtained by this auto-modeling process can be different from those by direct measurement, which can have a dosimetric effect on the dose distribution. In this paper we estimated JTF and MLCTF obtained by the auto-modeling process in the Pinnacle3 TPS. At first, we obtained JTF and MLCTF by direct measurement, which were the ratio of the output at the reference depth under the closed jaw collimator (MLCs for MLCTF) to that at the same depth with the field size $10{\times}10\;cm^2$ in the water phantom. And then JTF and MLCTF were also obtained by auto-modeling process. And we evaluated the dose difference through phantom and patient study in the 3D-CRT plan. For direct measurement, JTF was 0.001966 for 6 MV and 0.002971 for 10 MV, and MLCTF was 0.01657 for 6 MV and 0.01925 for 10 MV. On the other hand, for auto-modeling process, JTF was 0.001983 for 6 MV and 0.010431 for 10 MV, and MLCTF was 0.00188 for 6 MV and 0.00453 for 10 MV. JTF and MLCTF by direct measurement were very different from those by auto-modeling process and even more reasonable considering each beam quality of 6 MV and 10 MV. These different parameters affect the dose in the low-dose region. Since the wrong estimation of JTF and MLCTF can lead some dosimetric error, comparison of direct measurement and auto-modeling of JTF and MLCTF would be helpful during the beam commissioning.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.1
• /
• pp.56-72
• /
• 1999

Airborne concentrations of welding fumes in which 13 different metals such as Al, Cd, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Si, Sn, Ti, and Zn were analyzed were measured at 18 factories including automobile assembly and manufactures, steel heavy industries and shipyards. Air samples were collected by personal sampler at each worker's worksite(n=339). Blood levels of Cd, Cu, Fe, Mn, Pb and Zn were also measured from samples taken from 447 welders by atomic absorption spectrometry and compared with control values obtained from 127 non-exposed workers. The results were as follows ; 1. Among various welding types, $CO_2$ welding 70.2 % were widely used, shielded metal arc welding(SMAW) 22.1 % came next, and rest of them were metal inert gas(MIG) welding, submerged arc welding(SAW), spot welding(SPOT) and tungsten inert gas(TIG) welding. 2. Welding fume concentration was $0.92mg/m^3$($0.02{\sim}15.33mg/m^3$) at automobile assembly and manufactures, $4.10mg/m^3$($0.02{\sim}70.75mg/m^3$) at steel heavy industries and $5.59mg/m^3$($0.30{\sim}91.16mg/m^3$) at shipyards, respectively, showing significant difference among industry types. Workers exposed to high concentration of welding fumes above Korean Permissible Exposure Limit(KPEL) amounted to 7.9 % and 12.5 %, in $CO_2$ welding and in SMAW at automobile assembly and manufactures and 62.7 % in $CO_2$ welding, and 12.5 % in SMAW at shipyards, and 66.2 % in $CO_2$ welding and 70.6 % in SMAW at steel heavy industries. 3. Geometric mean of airborne concentration of each metal released from welding fumes was below one 10th of KPEL in all welding types. Percentage of workers, however, exposed to airborne concentration of metals above KPEL amounted to 16.8 % in Mn and 7.6 % in Fe in $CO_2$ welding; 37.5 % in Cu in SAW, 30 % in Cu in TIG; and 25 % in Pb in SPOT welding. As a whole, 76 Workers(22.4%) were exposed to high concentration of any of the metals above KPEL. 4. There were differences in airborne concentration of metals such as Al, Cd, Cr, Cu. Fe. Mn, Mo, Ni, Pb, Si, Sn, Ti and Zn by industry types. These concentrations were higher in shipyards and steel heavy industries than in automobile assembly and manufactures. Workers exposed to higher concentration of Pb above KPEI amounted to 7.4 % of workers(7/94) in automobile assembly and manufactures. In shipyards, 19.2 % of workers(19/99) were over-exposed to Mn and 7.1 % (7/99) to Fe above KPEL. In steel heavy industries, 14.4 %(21/146), 7.5 %(11/146) and 13 %(19/146) were over-exposed to Mn, Fe and Cu, respectively. As a whole, 76 out of 339 workers(22.4%) were exposed to any of the metals above KPEL. 5. Blood levels of Cd, Cu, Fe, Mn, Pb, and Zn in welders were $0.11{\mu}g/100m{\ell}$, $0.84{\mu}g/m{\ell}$, $424.4{\mu}g/m{\ell}$, $1.26{\mu}g/100m{\ell}$, $5.01{\mu}g/100m{\ell}$ and $5.68{\mu}g/m{\ell}$, respectively, in contrast to $0.09{\mu}g/100m{\ell}$, $0.70{\mu}g/m{\ell}$, $477.2{\mu}g/m{\ell}$, $0.73{\mu}g/100m{\ell}$, $3.14{\mu}g/100m{\ell}$ and $6.15{\mu}g/m{\ell}$ in non-exposed control groups, showing significantly higher values in welders but Fe and Zn.

• Food Science and Preservation
• /
• v.23 no.1
• /
• pp.12-19
• /
• 2016

This study was conducted to determine $CO_2$ treatment condition to extend the shelf-life of 'Seolhyang' strawberry. Fresh strawberries with red color on 80% of the fruit surface were harvested. The samples at two different stages (on the $1^{st}$ and $3^{rd}$ day after harvest) were placed in a gas-tight chamber with 0, 5, 15, or 30% $CO_2$ concentration for 3 hours at $4^{\circ}C$. Then, the strawberry samples were immediately packaged in a PET tray and stored at $4^{\circ}C$. The carbon dioxide treatment was effective in maintaining the quality of 'Seolhyang' strawberries treated on the $1^{st}$ day after harvest. These samples had higher firmness, lower redness, softening index, and decay rate compared to samples treated on the $3^{rd}$ day after harvest. Treatment with both 15 and 30% of $CO_2$ concentration on the $1^{st}$ day after harvest induced an increase of firmness of 'Seolhyang' strawberry after the treatment. Samples treated with 15 and 30% $CO_2$ the $1^{st}$ day after harvest maintained quality for 10 days. However, samples treated with $CO_2$ on the $3^{rd}$ day after harvest lost marketability at 10 days of storage. At the atmosphere containing 30% $CO_2$ on the $1^{st}$ day after harvest was most effective in reducing decay rate and fruit softening, and maintaining bright red color of strawberries among different $CO_2$ concentrations. Therefore, a 30% $CO_2$ treatment within one day after harvest can be a practical postharvest technology to extend shelf-life of 'Seolhyang' strawberry.

• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.2335-2347
• /
• 2023

As medical facilities are usually built at urban areas, special concrete aggregates and evaluation methods are needed to optimize the design of concrete walls by balancing density, thickness, material composition, cost, and other factors. Carbon treatment rooms require a high radiation shielding requirement, as the neutron yield from carbon therapy is much higher than the neutron yield of protons. In this case study, the maximum carbon energy is 430 MeV/u and the maximum current is 0.27 nA from a hybrid particle therapy system. Hospital or facility construction should consider this requirement to design a special heavy concrete. In this work, magnetite is adopted as the major aggregate. Density is determined mainly by the major aggregate content of magnetite, and a heavy concrete test block was constructed for structural tests. The compressive strength is 35.7 MPa. The density ranges from 3.65 g/cm³ to 4.14 g/cm³, and the iron mass content ranges from 53.78% to 60.38% from the 12 cored sample measurements. It was found that there is a linear relationship between density and iron content, and mixing impurities should be the major reason leading to the nonuniform element and density distribution. The effect of this nonuniformity on radiation shielding properties for a carbon treatment room is investigated by three groups of Monte Carlo simulations. Higher density dominates to reduce shielding thickness. However, a higher content of high-Z elements will weaken the shielding strength, especially at a lower dose rate threshold and vice versa. The weakened side effect of a high iron content on the shielding property is obvious at 2.5 µSv=h. Therefore, we should not blindly pursue high Z content in engineering. If the thickness is constrained to 2 m, then the density can be reduced to 3.3 g/cm³, which will save cost by reducing the magnetite composition with 50.44% iron content. If a higher density of 3.9 g/cm³ with 57.65% iron content is selected for construction, then the thickness of the wall can be reduced to 174.2 cm, which will save space for equipment installation.

• Nuclear Medicine and Molecular Imaging
• /
• v.41 no.3
• /
• pp.241-246
• /
• 2007

Purpose: $[^{11}C]6-OH-BTA-1$ ([N-methyl-$^{11}C$]2-(4'-methylaminophenyl)-6-hydroxybenzothiazole, 1), a -amyloid imaging agent for the diagnosis of Alzheimer's disease in PET, can be labeled with higher yield by a simple loop method. During the synthesis of $[^{11}C]1$, we found the formation of by-products in various solvents, e.g., methylethylketone (MEK), cyclohexanone (CHO), diethylketone (DEK), and dimethylformamide (DMF). Materials and Methods: In Automated radiosynthesis module, 1 mg of 4-aminophenyl-6-hydroxybenzothiazole (4) in 100 l of each solvent was reacted with $[^{11}C]methyl$ triflate in HPLC loop at room temperature (RT). The reaction mixture was separated by semi-preparative HPLC. Aliquots eluted at 14.4, 16.3 and 17.6 min were collected and analyzed by analytical HPLC and LC/MS spectrometer. Results: The labeling efficiencies of $[^{11}C]1$ were $86.0{\pm}5.5%$, $59.7{\pm}2.4%$, $29.9{\pm}1.8%$, and $7.6{\pm}0.5%$ in MEK, CHO, DEK and DMF, respectively. The LC/MS spectra of three products eluted at 14.4, 16.3 and 17.6 mins showed m/z peaks at 257.3 (M+1), 257.3 (M+1) and 271.3 (M+1), respectively, indicating their structures as 1, 2-(4'-aminophenyl)-6-methoxybenzothiazole (2) and by-product (3), respectively. Ratios of labeling efficiencies for the three products $([^{11}C]1:[^{11}C]2:[^{11}C]3)$ were $86.0{\pm}5.5%:5.0{\pm}3.4%:1.5{\pm}1.3%$ in MEK, $59.7{\pm}2.4%:4.7{\pm}3.2%:1.3{\pm}0.5%$ in CHO, $9.9{\pm}1.8%:2.0{\pm}0.7%:0.3{\pm}0.1%$ in DEK and $7.6{\pm}0.5%:0.0%:0.0%$ in DMF, respectively. Conclusion: The labeling efficiency of $[^{11}C]1$ was the highest when MEK was used as a reaction solvent. As results of mass spectrometry, 1 and 2 were conformed. 3 was presumed.

• The Korean Journal of Pharmacology
• /
• v.31 no.3
• /
• pp.365-375
• /
• 1995

The anemia-inducing strain of Friend virus (FVA) is a murine retrovirus which stimulates the proliferation of erythroid progenitor cells. The progenitor cells synthesized by FVA-stimulation are unable to proceed with differentiation and accumulate in the spleen resulting in splenomegaly in infected mice. Using FVA-inoculated mice as a model, we have investigated the antiretroviral effects of 2',3'-dideoxycytidine (ddC) and recombinant $interferon-{\alpha}-A\;(rIFN-{\alpha}-A)$ on FVA infection. The extent of the infection was determined by measuring the weights of the spleens. Daily intraperitoneal injection of ddC (100 mg/kg body weight), $rIFN-{\alpha}-A$ (10 KU/mose) and the combination of both drugs to FVA inoculated mice for 18 days resulted in suppression of the growth of spleens by 15.1%, 52.7% and 61.6%, respectively. When ddC was dissolved in drinking water (0.1 mg/ml) and administered to a group of FVA inoculated mice ad libitum, and $rIFN-{\alpha}-A$ (10 KU/mouse) was intraperitoneally injected daily to another group of ddC (0.1 mg/ml) drinking mice for 18days, the growth of spleens was suppressed by 38.4% and 83.2%, respectively. These results indicate that administration of ddC via drinking water is more effective in suppressing FVA infection than the daily injection of ddC, and that the combined effects ddC and $rIFN-{\alpha}-A$ are not synergistic but additive. In order to determine whether ddC treatment alters the characteristic of the progenitor cells with respect to $Ca^{++}$ uptake, $Ca^{++}$ uptake in erythroid cells and the effect of cyclohexyladenosine (CHA) on the $Ca^{++}$ uptake were studied. $Ca^{++}$ uptake in the erythroid progenitor cells was about 20-fold greater than in mouse erythrocytes and the inhibition of $Ca^{++}$ uptake by CHA was the greatest in the progenitor cells from FVA infected mice which were treated with ddC. The inhibition was obviated by theophylline. Results of CHA binding studies showed that the erythroid progenitor cells contain both high and low affinity CHA binding sites, whereas mose erythrocytes contain only the low affinity CHA binding sites.

• The Korean Journal of Pesticide Science
• /
• v.21 no.1
• /
• pp.84-89
• /
• 2017

This study was carried out to investigate residue dissipation of fluquinconazole and flusilazole in field-sprayed tomatoes during greenhouse cultivation and processing. The test pesticide, fluquinconazole+flusilazole 8.5 (7+1.5)% SC, was sprayed onto the tomatoes growing in a greenhouse according to Korea preharvest intervals and then samples were collected on 0 (3 hours after spraying), 1, 3, 5 and 7 days after last application for decline test. For processing test, tomatoes collected at harvest on 5 day after last application were processed to puree and juice. Limits of quantitation of fluquinconazole and flusilazole were 0.005 mg/kg in both tomatoes and their processed products. Recoveries for validation of the analytical methods for fluquinconazole and flusilazole in tomatoes and their processed products ranged from 74.8 to 97.5%. Biological half-lives of fluquinconazole and flusilazole in tomatoes under greenhouse conditions found to be 5.2 and 6.4 days, respectively. Average persistent residue levels of fluquinconazole and flusilazole were 37.34 and 79.53% after washing, 8.95 and 28.75% in filtrates after boiling, 3.58 and 14.66% in puree, and 3.34 and 13.52% in juice, respectively. These results indicated that the test pesticide residues on tomatoes could be largely removed through washing and boiling.

• Journal of Oral Medicine and Pain
• /
• v.33 no.2
• /
• pp.121-132
• /
• 2008

To establish the diagnosis and treatment plan for skeletal Class II malocclusion, patient's skeletal morphology, prognosis as well as the treatment effect is one of the important factor to consider. Therefore, the present study classified analyzed the difference between initial(T1) and after use of activator(T2), and after finish of direct multi-bonding system treatment(T3) for Class II malocclusion during growth period according to the treatment result(effective body length) and morphology of vertical skeletal type. The experimental group was classified into two groups(1 group, 2 group) according to the effective body length change between before and after use of activator, showed good treatment effect of activator for patient with small mandible and large differential between maxilla and mandible, and short anterior facial height. And the difference between 1 and 2 group in the experimental group before treatment(T1) disappeared in the finished treatment(T3). But in contrast, the initial difference of T1 stage between a and b group in the control group did not disappear in the finished treatment(T3). In short, experimental group's treatment effect was much better than contrast group and the treatment effect was maintained and got stable results at comparison experimental group with contrast group. Through this study, we can find activator's treatment effect and stable retention of that in growing Class II malocclusion patients. By estimate of activator treatment effect through these results, we can establish the correct diagnosis and treatment plan for adolescent Class II malocclusion estimate of activator treatment effect and lead the ideal facial growth pattern.