• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.512-515
• /
• 2009

A 90-nm CMOS motion estimation (ME) processor was developed by employing dynamic voltage and frequency scaling (DVFS) to greatly reduce the dynamic power. To make full use of the advantages of DVFS, a fast ME algorithm and a small on-chip DC/DC converter were also developed. The fast ME algorithm can adaptively predict the optimum supply voltage ($V_D$) and the optimum clock frequency ($f_c$) before each block matching process starts. Power dissipation of the ME processor, which contained an absolute difference accumulator as well as the on-chip DC/DC converter and DVFS controller, was reduced to $31.5{\mu}W$, which was only 2.8% that of a conventional ME processor.

• Bulletin of the Korean Chemical Society
• /
• 제34권4호
• /
• pp.1145-1152
• /
• 2013

The rate constant of alkaline fading of methyl green ($ME^{2+}$) was measured in the presence of non ionic (TX-100), cationic (DTAB) and anionic (SDS) surfactants. $ME^{2+}$ hydrolyses and fades in neutral water and in this work we search the effects of surfactants on its fading rate. The rate of reaction showed remarkable dependence on the electrical charge of the used surfactants. It was observed that the reaction rate constant decreased in the presence of DTAB and SDS and increased in the presence of TX-100. Binding constants of $ME^{2+}$ to TX-100, DTAB and SDS and the related thermodynamic parameters were obtained by classical (or stoichiometric) model. The results show that binding of $ME^{2+}$ to TX-100 and DTAB are two-region and that of SDS is three-region. Also, the binding constants of $ME^{2+}$ to surfactant molecules in DTAB/TX-100 and SDS/TX-100 mixed solutions and their stoichiometric ratios were obtained.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2017년도 추계학술발표대회
• /
• pp.134-137
• /
• 2017

Follow-me function of drones is new and attractive for selfie drone users, where the drone autonomously follows and capture the user. Currently the products use the difference between GPS's in the drone and user side mobile GCS, but the targeting accuracy is not satisfactory owing to the low accuracy of GPS data, often the order of ten meters. We designed a new follow-me mode algorithm that utilizes the accuracy of visual tracking algorithm and the reliability of GPS-based. The experiment shows that proposed follow-me can capture much accurately the target user in the center of video content than GPS-only methods, and recover the vision algorithm failure quickly in 5-10 seconds.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.205-208
• /
• 1999

We have studied properties(crystal structure, density, absorption, contraction, initial permeability, and permeability) of Ba$\sub$0.2/Me$\sub$0.31/Fe$\sub$0.49/(Me:Ni$\sub$1-x/, Cu$\sub$x/ x=0~1) ferrites with various Me site, because of development of magnetic materials for inductor. As a results of the density, absorption rate, and shrinkage rate, the sintering temperature of Ba$\sub$0.2/ Me$\sub$0.31/ FEesub 0.49/(Me:Ni$\sub$1-x/ x=0.25, 0.75) had got over 1100$^{\circ}C$ for 3 hours. According to SEM images, the configurations of grain were hexagonal, Increasing the sintering temperature, initial Permeability increased. The complex permeabilities as a function of for several MHz showed constants.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 추계학술발표회
• /
• pp.915-916
• /
• 2005

The high power RF system for the PEFP 20MeV proton accelerator composed of the 3MeV RFQ and the 20MeV DTL has been installed. The klystron for the RFQ was tested up to 600kW and operated routinely to drive the RFQ in a pulse mode operation. The klystron for the DTL which consists of 4 tanks was tested up to 800kW in pulse mode operation. The pulse width and repetition rate was 50${\mu}s$ and 1Hz respectively. The high power RF system has been operated to drive each accelerating structure and will be used to accelerate 20MeV proton beam.

• Bulletin of the Korean Chemical Society
• /
• 제16권1호
• /
• pp.30-33
• /
• 1995

UV photolysis of the titled polysilane (Me3Si)3SiMe (I) in the presence of a trapping agent of 2-propenol has been performed to investigate the interaction of short-lived silicon species formed from the photolysis of I with 2-propenol. Product studies show that the Me(Me3Si)Si: (II) and (Me3Si)3Si${\cdot}$(III) are primarily formed as the major reactive species which saturate their valencies via O-H insertion and H-abstraction, respectively. Some products are unstable toward further secondary reaction such as photodissociation and intermolecular reaction. The PM3 semiempirical calculations are performed to deduce the energetics of the photoinduced chemical reactions of I with the substrate.

• Bulletin of the Korean Chemical Society
• /
• 제35권5호
• /
• pp.1460-1464
• /
• 2014

The substituent effects on the pyridinolysis (XC5H4N) of Y-aryl ethyl chlorophosphates are investigated in acetonitrile at $35.0^{\circ}C$. The two strong ${\pi}$-acceptor substituents, X = 4-Ac and 4-CN in the X-pyridines, exhibit large positive deviations from the Hammett plots but little positive deviations from the Br$\ddot{o}$nsted plots. The substituent Y effects on the rates are really significant and the Hammett plots for substituent Y variations in the substrates invariably change from biphasic concave downwards via isokinetic at X = H to biphasic concave upwards with a break point at Y = 3-Me as the pyridine becomes less basic. These are interpreted to indicate a mechanistic change at the break point from a stepwise mechanism with a rate-limiting bond formation (${\rho}_{XY}$ = -6.26) for Y = (4-MeO, 4-Me, 3-Me) to with a rate-limiting leaving group expulsion from the intermediate (${\rho}_{XY}$ = +5.47) for Y = (4-Me, H, 3-MeO). The exceptionally large magnitudes of ${\rho}_{XY}$ values imply frontside nucleophilic attack transition state.

• 한국가금학회지
• /
• 제23권2호
• /
• pp.85-98
• /
• 1996

Results of experiments on the nutrient requirements and feeding system of broiler breeder hens were reviewed, and daily requirements of energy and protein were calculated using the prediction equations reported by Scott(1977) and NRC(1981). The experimental reports on daily ME needs of broiler breeder hens were ranged from 400 to 450 kcal, however, the ME needs of caged hens were 92~93% to those of floor-housed hens due to the difference of ME need for activity. The ME needs of broiler breeders decreased with increasing environmental temperature corresponding to a drop of 25 kcal per day for each 5˚C rise. About 80~90% of the daily ME needs were used for body rnaintenance and activity of hens. Experimental results on daily protein needs of broiler breeder hens were ranged from 18 to 22 g, however, calculated protein needs decreased as the BW gain and eggmass output decreased after peak production, and about 60~65% of the daily protein needs were used for egg production. In the current practice, broiler breeder hens are restricted in feed, and consume their daily allowance in the first 2 to 6 h after dawn. The results suggest that eggshell quality can be significantly improved in hens fed during the afternoon when shell calcification is initiated, with no adverse effect on laying rate and fertility of eggs.

• Journal of Microbiology and Biotechnology
• /
• 제11권2호
• /
• pp.346-349
• /
• 2001

The antimutagenic activity of polysaccharides extracted from soybeans fermented with Agrocybe cylindracea (AC) or Phellinus igniarius (PI) against 2-amino-3,8-dimethylimidaxo[4,5-f]quinoxaline (MeIQx) was examined using a Salmonella/Ames test and host-mediated assay in mice. The polysaccharides from the soybeans fermented with A. Cylindracea and P. igniarius inhibited the mutagenic acitivity of the cooked food mutagen, MeIQx, by 31.2% and 35.3%, respectively. The polysaccharides also inhibited MeIQx genotoxicity in a dose-dependent manner in micel. These results suggest that the polysaccharides from soybeans fermented with A. cylindracea or P. igniarius exhibit antimutagenic properties against MeIQx in vitro and in vivo.

• Environmental Engineering Research
• /
• 제22권3호
• /
• pp.312-319
• /
• 2017

The treatment of dyeing wastewater is not easy because dyes are mainly aromatic, heterocyclic compounds. The most effective technologies and methods to treat dyeing wastewater are costly and involve materials that are difficult to regenerate after use. Therefore, it is necessary to develop cost-effective, eco-friendly technologies to treat dyeing wastewater. The aim of this study was to investigate the removal of sulfur blue 11 (CI 53235) anionic dye using methyl esterified sericite (ME-sericite) adsorbents in an aqueous solution. The results are discussed in terms of the ME-sericite particle size, temperature, pH value and initial sorption rate according to the initial sulfur blue concentration. In addition, we analyzed the adsorption kinetics using a Pseudo-second-order model with the desorption and reusability. The methyl esterification caused a considerable increase in the specific surface area from 4.45 to $17.62m^2/g$. The ME-sericite adsorbents successfully removed > 98% of the sulfur dye in the aqueous solution. For the adsorption of 1 mg of sulfur dye, approximately 4.6 to 6.6 g/L ME-sericite were required. The desorption process was carried out by mixing a NaOH eluent to desorb 90.56% of the sulfur dye with 2 h of contact time. Thus, the ME-sericite is a promising adsorbent to treat dyeing wastewater due to its low dose requirement, high removal efficiency and inexpensive material.