• Journal of the Korean Ceramic Society
• /
• v.53 no.1
• /
• pp.1-6
• /
• 2016

In this year, Koreans have a shortage in agricultural and drinking water due to severe algal blooms generated in major lakes. Waste oyster shells were obtained from temporary storage near the workplace at which oysters were separated from their shells. Heating ($1000^{\circ}C$ for 1 h in air) was employed to convert raw oyster shell powders into calcium oxide powders that reacted efficiently with phosphorus and nitrogen to remove algal blooms from eutrophicated wastewater. As the dispersed amount of heated oyster shell powders was increased, water clarity and visual light penetration were improved. Coagulation, precipitation and carbonation process of the heated oyster shell powders in a water purifier facilitated removal of eutrophication nutrient such as phosphorus and nitrogen, which is both beneficial and economically viable. $CO_2$ implantation by carbonation treatment not only produced thermodynamically stable CaO in oyster shells to derive precipitated calcium carbonate (PCC) but also accelerated algal removal by activation of coagulation and precipitation process. The use of oyster shell powders led to a mean reduction of 97% in total phosphate (T-P), a mean reduction of 91% in total nitrogen (T-N) and a maximum reduction of 51% in chemical oxygen demand (COD), compared with the total pollutant load of raw algal solution. Remarkable water quality improvement of algal removal by heated oyster shell powders and PCC carbonation treatment will allow utilization as water resources to agricultural or industrial use.

• Polymer(Korea)
• /
• v.39 no.1
• /
• pp.122-129
• /
• 2015

Recently, the development of a new class of anti-fouling paint resin which has excellent anti-fouling performance and no persistence in the marine ecology is necessary. In this study, we first polymerized polyurethanes (PUs) as the other type of matrix which have carboxylic acid groups by using poly(ethylene glycol) (PEG), 4,4'-diphenylmethane diisocyanate (MDI), and 2,2'-bis(hydroxyl methyl)-propionic acid (DMPA). And next, we synthesized final resins having quaternary ammonium salts on pendant acid groups of PUs. After synthesis, the physical self-polishing property of resin by the measurement of reduced thickness in sea water was tested. The mechanical property of antifouling paint resin was good when the molecular weight of PEG was 600 or less. It was confirmed that the adhesion of PU resin was deteriorated when the content of quaternary ammonium salt was incorporated over specific value.

• Journal of Environmental Health Sciences
• /
• v.22 no.2
• /
• pp.32-42
• /
• 1996

This study was performed to evaluate accuracy and precision of filter method and impinger method for analyzin airborne isocyanates in mixture (2, 6-TDI, HDI, 2, 4-TDI, MDI). Filter method was performed using the OSHA Method 42 and impinger method using the NIOSH Method 5521. The samples were analyzed by high performance liquid chromatography-ultraviolet detector (HPLC-UVD). After the optimum operating conditions for each method were investigated, samples with various concentration levels were quantified at the conditions. The precision was expressed by the pooled coefficient of variation(C.V.) and the accuracy by overall accuracy. The results are summarized as follows: 1. The optimum condition of filter method was determined at 35/65 ACN/buffer (0.01 M ammonium acetate) in mobile phase. And in case of impinger method, it was at 30/70 ACN/buffer(0.2 M sodium acetate). The effect of concentrations of acetate on the separation of the peaks was not significant, but, the effect of ACN/buffer ratio was significant. 2. The correlation coefficients for the two methods were above 0.9 in all isocyanate compounds. Average recovery efficiencies for 2, 6-TDI, HDI, 2, 4-TDI and MDI in filter method were 92.4%, 102.6%, 87.3% and 101.0%, respectively. Those in impinger method were 106.6%, 106.7%, 99.0% and 103.6%, respectively. As a result, the recovery efficiency of impinger method was higher than those of filter method in analyzing isocyanate compounds. 3. The pooled coefficients of variations of the methods were slightly higher than expected. The overall accuracies of the methods were within $\pm 25%$ for each isocyanate compound. Since these results satisfy NIOSH criteria, the accuracy of the experiment is appropriate. 4. As seen above, impinger method is more efficient than filter method. But, there are many disadvantages in impinger method. Therefore, solid sorbent such as a glass fiber filter must be developed in order to have the high efficiency not less than that of impinger method in the future.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.4
• /
• pp.1034-1040
• /
• 2020

The mechanical properties of NATM resin of synthetic polyurethane-epoxy resin for stainless steel were measured by SEM, FT-IR, tensile properties, and specific mass loss by EIS analysis, etc. As interest in eco-friendly medium coatings increased, the Heavy duty coatings were synthesized for various metals such as stainless steel composed of Polyol, MDI, water bored Epoxy resin, filling agent, silicon surfactant, catalyst etc. The coatings of synthetic NATM resin were increased tensile strength due to various temperature change, and the low-Specific Mass Loss was measured in a highly electrolytic solution. In conclusion, the NATM coatings composed of polyurethane and waterbored Epoxy, polyurea resin were synthetic microstructure with cross linkage can be good material for coating of anticorrosion of metal substrates such as stainless steel.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1358-1364
• /
• 2019

The mechanical properties of Heavy duty resin of synthetic polyurethane-epoxy resin for stainless steel were measured by SEM, FT-IR, tensile properties, and specific mass loss by EIS analysis, etc. As interest in eco-friendly medium coatings increased, the Heavy duty coatings were synthesized for various metals such as stainless steel composed of Polyol, MDI, water bored Epoxy resin, filling agent, silicon surfactant, catalyst etc. The coatings of synthetic Heavy duty resin were increased tensile strength due to various temperature change, and the low-Specific Mass Loss was measured in a highly electrolytic solution. In conclusion, the Heavy Duty coatings composed of polyurethane and waterbored Epoxy resin were synthetic microstructure with cross linkage can be good material for coating of anticorrosion of metal substrates such as stainless steel.

• Polymer(Korea)
• /
• v.34 no.1
• /
• pp.8-13
• /
• 2010

The physical properties of polymeric foams depend on the density of foams, physical properties of base polymers, the content of open cells, and cell structures including the size and its distribution, the shape of cell, and the thickness of skin layer. The foam density is affected by the chemistry of raw materials, the concentration of crosslinking agent and the blowing agent as well as the operating parameters during production process. In this study, the basic formulations of foams are composed of polyester polyol, MDI, amine catalyst, tin catalyst, silicone surfactant, and water. Cross-linking density of polyurethane was increased by using chain extenders. Also, the mechanical properties of polyurethane foam were improved by using the inorganic fillers (silica 1,2 and talc 1,2) having different $SiO_2$ contents and particle sizes. We investigated the properties of modulus, tensile strength, compressive strength and hardness of foams obtained by changing kind of inorganic filler and chain extender, and observed the distribution of inorganic filler as well as variation of cell size within the foams by electron microscopy.

• YAKHAK HOEJI
• /
• v.54 no.6
• /
• pp.507-521
• /
• 2010

Training for asthma patients by professionals has been highly emphasized for patients' self-management. In the present study, three standardized training sessions targeting hospital pharmacists were performed. On the basis of the number of training sessions taken, a non-educated group (CG), an once-educated group (NG), and a twice more-educated group (IG) were allocated. The most frequent errors of using an inhalant were shaking before the use in MDI while taking breathe out before inhaling in the case of DPI, and the total average number of errors were the biggest for CG and the smallest in IG. On comparison in the number of the four symptoms of asthma according to the level of seriousness, it was revealed that the total average number was the biggest in CG and the smallest in IG. In the level of awareness regarding the contents of training for patients, patients over 50 tended to answer that they were aware of education contents, and particularly in mouth rinsing and the use before/after a meal, significant similarity was examined. Regular asthma patient training performed by hospital pharmacists appeared to reduce errors in the inhaler usage, increase the quality of life of an patient, and help a patient remember the contents of the training. Especially among patients over 50, it was found to be more effective and retraining of more than two sessions was requisite.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.27.2-27.2
• /
• 2010

We have studied the formation of coronal holes (CHs) associated with halo CMEs. For this study, we used multi-wavelength data from Yohkoh Soft X-ray Telescope (SXT), GOES Soft X-ray Imager (SXI), SOHO EIT 195 ${\AA}$, SOHO MDI magnetogram, MLSO He I 10830 ${\AA}$, and BBSO H-alpha. The CHs are characterized by open magentic field regions with low emission, density, and temperature and their open fields drive high speed solar winds which cause geomagnetic storms. So far, the formation and the evolution of CHs are not well understood. The formation of the dark region associated with the eruption of a CME is well known as "coronal dimming" which may be caused by the mass depletion near the CME footpoint. It is different from a typical CH since it persists for only one or two days. In this study, we present three cases that show the formation of coronal holes which are associated with three halo CMEs: 1) 2000 Jul 14, 2) 2003 Oct 28, 3) 2005 May 13. In the first case, hot plasma was ejected during a weak eruption and then filled out the pre-existing CH. After the halo CME occurred, the hot plasma region becomes a CH again. In the second and the third cases, we found newly formed CHs just after their associated CMEs. All three coronal holes are associated with strong flares and persist over 3 days until they disappeared by the solar rotation. Examining the MDI magnetograms, we found that the magnetic polarity of each CH region has one polarity. Based on these results, we suggest that the coronal holes can be formed by the CMEs and they should be distinguished from the coronal dimming.

• International Journal of Safety
• /
• v.4 no.1
• /
• pp.14-17
• /
• 2005

Recycled polyol was obtained by glycolysis of MDI-based Polyurethane(PU) rigid foam. The chemical structure of the recycled pclyol was confirmed by GC(gas chromatography) and 1H-NMR. The recycled polyol throughout the glycolysis contained liquid polyol and methylenedianiline(MDA). MDA which could cause liver cancer is carcinogenic material. TWA(Time Weighted Average.) amount for MDA in MSDS(Material Safety Data Sheets) was confined less than 0.1 ppm. The melting temperature of MDA is $92^{\circ}C$, and boiling temperature is $398^{\circ}C$. During the gylcolysis most of MDA was dissolved in liquid polyol. The probability that MDA diffuses into the atmosphere is low but there could be an absorption of MDA into skin. Furthermore because MDA is amine compound, recycled polyol which contained MDA had a difficulty in reaction control of polyurethane. Therefore reduction of MDA amount was needed strongly. In this study the elimination of MDA were performed through deamination of the recycled polyol by glycidyl ether compounds. As glycolysis was proceeded, the amount of MDA was 9.8 wt % at early stage and increased up to 14.0 wt % after 8 hours reaction. It was found that 2-Ethylhexyl glycidyl ether which contains aliphatic moiety was very effective compound for eliminating the primary aromatic amine compound :md the optimal mole ratio of 2-ethylhexyl glycidyl ether to MAD was 3. The final polyol after deamination by 2-ethylhexyl glycidyl ether has an appropriate viscosity(less than 500 centi poise) for polyurethane reaction.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.2
• /
• pp.238-243
• /
• 2014

The mechanical properties of NATM resin were measured by SEM, FT-IR spectra, tensile properties, mole ％ of [NCO/OH], and particle size analyzer on stainless steel. Growing concerns in the environment-friendly NATM resin, we have synthesized the solvent-free NATM resin to be coating on metals such as stainless. The properties of the synthesized NATM resin to be contained polyols, MDI, silicone surfactant, fillers and crosslink agents(diethyltoluene diamine, anhydrosorbitol), that they have highly stronger in intensity and longer durability than general NATM resin to be contained polyols, IPDI, silicone surfactant, fillers in general packing materials and coatings. The rigid segments of polyurethane in mechanical properties of coatings were due to cross linkage and the increase mole % of [NCO/OH]. In conclusion, the NATM microstructure with cross linkage can be good material for coating of anticorrosion of metal substrates such as stainless steel.