• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.21-21
• /
• 2001

자원재활용과 원가절감를 위해 고지재활용율이 크게 상승하고 있으며, 이와 아울러 고 지원료로부터 고품질의 제품을 생산할 수 있는 기술에 대한 관심이 증대되고 있는 실 정이다. 저급 고지로부터 고품질의 탈묵펄프를 얻기 위해서는 고지재활용공정의 핵심 공정인 부유부상 공정의 효율화가 가장 중요하다고 믿어진다. 이를 위해서는 부유부상 공정에 가장 큰 영향을 미치는 고형입자의 표면 화학적 특성에 따른 공정의 분리효율 평가와 이에 근거한 공정해석과 개선이 요청된다. 이러한 부유부상 공정을 표면화학적 측면에서 구명하기 위해 마이크로 크리스탈린 셀룰로오스(Microcrystalline cellulose: M MCC)를 모댈 물질로 사용하여 표면화학적 특성은 다르나 입자의 크기와 형태는 동일 한 시료를 준비하였다. 친수성의 표면 특성을 나타내는 MCC의 표면 특성을 바꾸기 위 하여 AKD(alkyl ketene dimer)로 처리비율을 달리하여 솔벤트 사이징 처리를 실시하 였다. 이렇게 준비된 MCC의 표면화학적 특성을 IGC를 이용하여 평가하였다 .. IGC는 G GC를 응용한 표면분석 기술로 고체의 물리화학적 특성과 흡착성을 분석하기 위해서 사용되며 이로부터 흡착제의 표면특성을 평가할 수 있다. 본 실험에서는 AKD로 소수화 정도가 다르도록 소수화시킨 MCC 시료를 이용하여 I IGC 칼럼을 준비하고 n-알칸과 몇가지 극성 용매률 이용하여 이들의 칼럼 내 체류시 간을 측정함으로써 흡착특성을 평가하고 이로부터 흡착현상을 열역학적으로 분석하였다. IGC 분석 시에는 칼럼의 온도를 $30^{\circ}C$, $35^{\circ}C$, $40^{\circ}C$의 3수준으로 변화시켰다. 측정결 과로부터 MCC 표면의 흡착자유에너지와 엔탈피, 엔트로피의 변화량을 평가하였으며, 또한 MCC 표면의 극성에너지와 산염기적 성질을 평가하였다. 실험결과 MCC의 소수화도에 따른 열역학적 흡착현상의 차이가 명백하였다. 이는 소 수화 수준에 따라 소수성 및 친수성 물질의 흡착성이 변화된다는 것을 보여준다. 따라서 탈묵 시 진행되는 기포에의 부착현상을 평가할 수 있는 기초자료로 활용될 수 있다 고 사료되었다.

• Journal of the Korean earth science society
• /
• v.26 no.7
• /
• pp.698-705
• /
• 2005

Heavy rain fall in the Korean Peninsula often occurs in the summer season due to MCC (Mesoscale Convective Complex) with complex mechanism. We analysed the Characteristics and the developing mechanism of MCC occurred at 14 July 2004. The results are as follows: a) There is strong wind inflow from the South-west china sea with heavy moisture and this moisture flux acts as the source of heavy rain, b) Because of the separation of upper and lower atmosphere due to an inversion layer at 600hPa, atmosphere over the Korea Peninsula is suddenly unstable. c) This MCC shows strong shear not with wind direction, but with the wind speed, and this wind shear continues the thermodynamic unstability of the convective system. d) MCC was suddenly developed over Heuksando at 1400LST 14 July 2004. Thus we can say that the topography also was strongly associated with the development of MCC and it is also necessary to clarify the relationship between topography and MCC development. in future research.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.1
• /
• pp.1-7
• /
• 2001

The immediate purposes of this study is to establish the surface chemical principles associated with the flotation process of waste papers and to verify them by practical flotation experiments. To achieve this AKD sized hydrophobic microcrystallince cellulose (MCC) with different levels of hydrophobicity, and hydrophilic MCC dyed with black were prepared as model substances. The effects of surface characteristics on flotation efficiency were evaluated by measuing the brightness of the flotation rejects obtained after the flotation experiments carried out using MCC mixtures prepared with different ratios of hydrophobic and hydrophilic MCCs. Results showed that more than 90% of the flotation rejects consisted of hydrophobic MCC indicating the critical importance of the hydrophobicity of the materials in the flotation process. The proportions of hydrophobic materials in the reject remained constant when highly sized MCC was used as a model of hydrophobic substance.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.123-125
• /
• 2009

Mismatch of electrical characteristics of modules in PV string invokes mismatch power loss. The mismatch occurs due to various causes such as shadow, aging, contamination, and module exchange. The concept of mismatch compensation converter(MCC) is presented in this paper to remedy the mismatch loss problem. MCC is connected to irregular modules only. MCC is composed of dc-dc converter and MPPT controller. It is noted that MPPT algorithm is employed to control MCC and is effective for maximum power available from irregular modules. The selection guide of MPPT control period is given based on the period of MPPT in PCU. The effectiveness of the MCC is verified by a prototype experiment.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.113-116
• /
• 1999

신호 대 잡음비가 낮은 환경에서 센서 어레이에 입사된 입력 신호 사이의 지연시간 추정(Time Delay Estimation, 이하 TDE)은 높은 분해능이 요구된다. 본 연구에서는 높은 분해능의 TDE를 구하기 위해 상호상관함수(Cross-Correlation)에 평균 차 함수(Average Magnitude Difference function, AMDF)의 역수를 가중한 MCC (Modified Cross-Correlation)알고리즘을 제안한다. 모의신호를 사용한 수치 시뮬레이션 실험으로 종래의 AMDF, Cross-Correlation 알고리즘과 본 연구에서 제안한 MCC 알고리즘의 분해능을 비교 분석하였다 각 알고리즘의 TDE 결과에 대해 STFT(Short Time fourier Transform)에 의한 시간 주파수 해석을 한 결과 MCC알고리즘을 사용하여 TDE 분해능이 향상되었음을 보고한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.9
• /
• pp.995-1000
• /
• 2016

The maximum cross-correntropy (MCC) algorithm with a set of random symbols keeps its optimum weights undisturbed from impulsive noise unlike MSE-based algorithms and its main factor has been known to be the input magnitude controller (IMC) that adjusts the input intensity according to error power. In this paper, a normalization of the step size of the MCC algorithm by the power of IMC output is proposed. The IMC output power is tracked recursively through a single-pole low-pass filter. In the simulation under impulsive noise with two different multipath channels, the steady state MSE and convergence speed of the proposed algorithm is found to be enhanced by about 1 dB and 500 samples, respectively, compared to the conventional MCC algorithm.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.6
• /
• pp.893-900
• /
• 2008

The heat exchangers in the ships have been changed from the conventional shell & tube type to the plate type due to some merits as a compactness, a high thermal efficiency and a light-weight. In recent. it is reported that the vacuum phenomena were occurred in the seawater outlet piping of a main central cooler (MCC) on the ships. From the viewpoints of a common sense, the vacuum pressure in the seawater piping is rare event and difficult to be convinced because the seawater is pumped into the piping by a seawater pump with a high discharge head. However, the occurrence of a vacuum pressure in the seawater line of an MCC is real situation and often gives a severe damage to a rubber gasket of an MCC with a plate type heat transfer area. In this study, we analyzed the vacuum pressure in the seawater line of an MCC by using the simpl Bernoulli's equation and found that the vacuum pressure in the seawater line of an MCC is inevitable untill the installation postion of an MCC is not lowered.

• Food Science and Biotechnology
• /
• v.15 no.1
• /
• pp.5-12
• /
• 2006

Degradation performance of environmentally friendly plastics that can be disintegrated by combination of sunlight, microbes in soil, and heat produced in landfills was evaluated for use in industries. Two multi-degradable master batches (MCC-101 and MCC-102 were manufactured, separately mixed with polyethylene using film molding machine to produce 0.025 mm thick films, and exposed to sunlight, microbes, and heat. Low- and high-density polyethylene (LDPE and HDPE) films containing MCC-101 and MCC-102 became unfunctional by increasing severe cleavage at the surface and showed high reduction in elongation after 40 days of exposure to ultraviolet light. LDPE and HDPE films showed significant physical degradation after 100 and 120 days, respectively, of incubation at $68{\pm}2^{\circ}C$. SEM images of films cultured in mixed mold spore suspension at $30^{\circ}C$ and 85% humidity for 30 days revealed accelerated biodegradation on film surfaces by the action of microbes. LDPE films containing MCC-l01 showed absorption of carbonyls, photo-sensitive sites, at $1710\;cm${-1}$ when exposed to light for 40 days, whereas those not exposed to ultraviolet light showed no absorption at the same frequency. MCC-101-based LDPE films showed much lower $M_w$ distribution after exposure to UV than its counterpart, due to agents accelerating photo-degradation contained in MCC-101.

• Journal of Internet Computing and Services
• /
• v.14 no.2
• /
• pp.73-85
• /
• 2013

As a way of augmenting constrained resources of mobile devices such as CPU and memory, many works on mobile cloud computing (MCC), where mobile devices utilize remote resources of cloud services or PCs, /have been proposed. A typical approach to resolving resource problems of mobile nodes in MCC is to offload functional components to other resource-rich nodes. However, most of the current woks do not consider a characteristic of dynamically changed MCC environment and propose offloading mechanisms in a conceptual level. In this paper, in order to ensure performance of highly complex mobile applications, we propose four different types of offloading mechanisms which can be applied to diverse situations of MCC. And, the proposed offloading mechanisms are practically designed so that they can be implemented with current technologies. Moreover, we define cost models to derive the most sutilable situation of applying each offloading mechanism and prove the performance enhancement through offloadings in a quantitative manner.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.2
• /
• pp.251-268
• /
• 2018

This study suggests a fashion design using aesthetic characteristics of works by Kate MccGwire, a modern sculptor paying attention to soft sculpture materials such as feathers. In this research on MccGwire works, their internal meanings may be derived as the dualism of familiarity, movement and consciousness. Works also have aesthetic characteristics of overlapping, fluidity and twist. Using such characteristics, 4 one piece dresses and 2 vest dresses were made. Research findings are as follows. First, aesthetic characteristics of MccGwire works could be expanded into expressive areas of silhouettes and details in fashion. Second, visual flow and concentration could be expressed by gradual coloration of feather colors. Third, dart manipulation could be applied naturally by details and curve silhouettes of fashion design. Fourth, touch of feather material could be expressed fully by leaving the edge of garments raw. Fifth, spatiality of fashion could be implemented partially by applying decorative saddle stitching to costume design details. This study explored a potential of soft sculpture occurred during a transitional process of objet pursued by 20th century's avant-garde artists applicable to fashion design ideas that suggested methods for contemporary creative design.