• The Journal of Asian Finance, Economics and Business
• /
• 제8권3호
• /
• pp.487-495
• /
• 2021

As Islam supports fair trade, the Murabaha is the most popular and most common mode of Islamic financing. It is a contract of sale between the bank and its client for the sale of goods at a price plus an agreed profit margin for the bank. The contract involves the purchase of goods by the bank which then sells them to the client at an agreed mark-up. While their characteristics and values are unique, they are also subject to conventional measurement of efficacies. This study investigates how the primary health predictors of conventional banks under the Basel III regime could provide a positive means to assess the Murabaha funding and subsequently secure long-term profitability. This study constructed a path analysis (from 120 databases) to assess whether Islamic banks' leverage and capital adequacy may alter the Murabaha funding and increase stock equity directly and indirectly. The research findings are mixed where leverage does not alter the Murabaha funding but only affects the profitability; besides, capital adequacy increases the outgoing funding significantly but does not increase stock equity. Murabaha funding is essential to Islamic bank equity. This study implies Murabaha funding are expensed, despite increasing debts in Islamic banks.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.665-666
• /
• 2015

Recently BIM technology has been expanded for using in construction project. However its spread has been delayed than the initial expectations, due to the high-cost of BIM infrastructure development, the lack of regulations, the lack of process and so forth. In construction site phase, especially the analysis of current research trend about IT technologies, virtualization and BIM service, data exchange such as drawing, 3D model, object data, properties using cloud computing and virtual server system is defined as a most successful solution. The purpose of this study is enable the cloud computing BIM server to provide several main function such as edit a model, 3D model viewer and checker, mark-up, snapshot in high-performance quality by proper design of VDI system. Concurrent client connection performance is a main technical index of VDI. Through test-bed server client, developed VDI system's multi-connect control will be evaluated. The performance-test result of BIM server VDI will effect to development direction of cloud computing BIM service for commercialization.

• Journal of information and communication convergence engineering
• /
• 제21권3호
• /
• pp.252-260
• /
• 2023

A bullet launcher can be developed as a smart instrument, especially for use in the military section, that can track, identify, detect, mark, lock, and shoot a target by implementing an image-processing system. In this research, the application of object recognition system, laser encoding as a unique marker, 2-dimensional movement, and pneumatic as a shooter has been studied intensively. The results showed that object recognition system could detect various colors, patterns, sizes, and laser blinking. Measuring the average error value of the object distance by using the camera is ±4, ±5, and ±6% for circle, square and triangle form respectively. Meanwhile, the average accuracy of shots on objects is 95.24% and 85.71% in indoor and outdoor conditions respectively. Here, the average prototype response time is 1.11 s. Moreover, the highest accuracy rate of shooting results at 50 cm was obtained 98.32%.

• 한국초전도ㆍ저온공학회논문지
• /
• 제25권3호
• /
• pp.34-37
• /
• 2023

The practical application of REBCO coated conductor (CC) tapes, vital for energy transmission (e.g., cable application) and high-field magnets (e.g., coil application), necessitates efficient and simple quality assessment procedures. This study introduces a systematic approach to assess the electromechanical properties of REBCO CC tapes under 77 K and self-field conditions. The approach involves customized tensile and bending tests that clarify the critical current (I_c) response of the CC tapes under mechanical loads induced by tension and bending. This study measures the retained Ic values of commercially available GdBCO CC tapes under 250 MPa tensile stress and 40 mm bending diameter. Through experimentation, the study demonstrates the resilience of these tapes and their suitability for applications. By presenting a simplified stress-based analysis and a bending test of the tapes, the study contributes to effective quality assessment methods for the development of practical superconducting products.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.396-400
• /
• 2003

A new synthesis process for nano laminating Ti$_3$SiC$_2$ has been developed using TiCx (x=0.67) and Si powder as starting materials by a reaction hot pressing. Bulk Ti$_3$SiC$_2$ was fabricated using a green body consisting of TiCx and Si by a hot pressing under the pressures of 25 MPa at 1420-1550 $^{\circ}C$ for 90 min. The synthesized Ti$_3$SiC$_2$ was consisting of only TiCx and Ti$_3$SiC$_2$. The relative density of sintered bulk Ti$_3$SiC$_2$ was increased as the hot pressing temperature was increased, which was mainly due to the increase in TiCx contents in synthesized Ti$_3$SiC$_2$. The synthesized Ti$_3$SiC$_2$ bulk was consisted of nano sized lamella structure of 20-100 nm in thickness. It was found that TiCx particles in Ti$_3$SiC$_2$ would increase the 3-point bending strength of synthesized Ti$_3$SiC$_2$ bulk. The maximum 3-P. bending strength of synthesized Ti$_3$SiC$_2$ bulk was more than 800 MPa. The Vickers hardness of synthesized Ti$_3$SiC$_2$bulk was as low as 5 Gpa, which was decreased with the indentation load. The quasi-plastic deformation behaviors were observed around indentation mark on Ti$_3$SiC$_2$.

• 대한지리학회지
• /
• 제41권2호
• /
• pp.188-194
• /
• 2006

3차원 위상 자료는 응급상황 처리와 3차원 네트워크 분석 등의 3차원 공간분석에 필수적으로 요구된다. 이 연구에서는 현재까지의 3차원 위상 데이터 모델에 대해 살펴보고, 건물을 설계하기 위해 사용되는 2차원 CAD 도면 데이터로 부터 3차원 위상적 노드-관계 데이터를 추출하는 방법을 개발하였다. 이 방법은 중심축 변환과 위상적 노드-관계 알고리듬들을 이용한 두 단계로 이루어진다. 첫번째 단계는 중심축 변환 알고리듬을 이용하여 CAD 데이터에서 폴리곤이나 이중 선으로 표현되는 벽으로부터 그 중심선을 생성하여 벽의 골격을 추출하는 것이다. 두번째 단계는 추출된 벽의 골격 자료를 이용하여 방을 3차원 노드로하고 방들간의 연결을 관계로하는 위상적 노드-관계 구조를 생성하는 것이다. 따라서, 그러한 연결들은 노드들간의 이웃성 또는 연결성을 표현하게 된다. 결론적으로, 이러한 변환방법으로 미시적 수준의 개별 건물들의 내부구조를 표현하는 3차원 위상구조 데이터는 건물의 도면 작성에 자주 사용되는 CAD 데이터로 부터 쉽게 생성될 수 있을 것이다.

• 대한공간정보학회지
• /
• 제22권3호
• /
• pp.47-56
• /
• 2014

최근 지구 온난화로 인하여 해수면의 상승속도가 증가하고, 자연재해가 증가함에 따라서 연안방재 및 개발을 위한 해 육상수직기준 연계에 대한 관심과 요구가 높아지고 있는 추세이다. 우리나라의 수직기준은 그 사용목적이 다르며, 목적에 따라 해상 및 육상에서 개별적으로 정하여 사용되고 있다. 해상수직기준은 지역평균해수면을 사용하며, 육상수직기준은 인천평균해수면을 사용한다. 따라서 본 연구에서는 첫째, 2012년과 2013년에 설치된 통합기본수준 점 48점을 이용하여 해 육상수직기준에 따른 기하표고의 차이를 분석하였다. 분석에는 지역평균해수면과 인천평균해수면을 참조하는 기하표고 및 국가지오이드모델 기반의 기하표고가 사용되었다. 전체 48점 중 도서지역을 제외한 31점 중 11점에서 10cm 이상의 잔차가 발생하였다. 잔차의 원인은 강물의 유입, 기준조위관측소의 이동, 항만공사에 따른 지형변화 등인 것으로 판단되었다. 둘째, 해 육상수직기준 연계를 위하여 해면경사의 경향을 분석하였다. 해면경사는 인천평균해수면과 지역평균해수면의 차이를 말한다. 분석결과 우리나라의 해면경사는 서해에서 남해 그리고 동해방향으로 높아짐을 확인할 수 있었다. 본 연구를 통하여 해 육상수직기준 연계를 위한 자료로서 통합기본수준점의 성과가 활용될 수 있음을 확인하였다. 향후 해 육상수직기준 연계를 위해서는, 해 육상을 연결하는 측량자료가 많이 확보되어야 하며, 국립해양조사원과 국토지리정보원의 지속적인 수직기준 관리 및 자료 공유가 필요하다. 연계된 육해상수직기준의 정보는 효율적이고 경제적인 연안개발과 방재에 크게 활용될 것으로 기대된다.

• Archives of Plastic Surgery
• /
• 제45권6호
• /
• pp.557-563
• /
• 2018

Background Numerous Dupuytren's fasciectomy techniques have been described, each associated with unique surgical challenges, complications and recurrence rates. We describe a common ground surgical approach to Dupuytren's disease; 3-dimensional fasciectomy (3DF). 3DF aims to address the potential contributors to the high recurrence rate of Dupuytren's disease and unite current limited fasciectomy practice that varies considerably between surgeons. Methods We describe the 3DF principles; raising thin skin flaps (addressing dermal involvement), excising diseased palmar fascia with a 3-5 mm clearance margin (treating highly locally recurrent conditions) and excising the vertical septae of Legueu and Juvara (providing deep clearance, hence addressing all potentially involved pathological tissue). The surgical outcomes between traditional limited fasciectomy (LF) and 3DF are compared. Results From the 786 operations included (n=585), postoperative recurrence rates were significantly lower for the 3DF group (2/145, 1.4%) than the LF group (72/641, 11.2%) (P= 0.001), and the time to recurrence was significantly longer ($5.0{\pm}0years$ vs. $4.0{\pm}0.2years$; P<0.0001). With recurrence excluded, there were no differences between the postoperative complication rates for 3DF (5/145, 3.5%) and LF (41/641, 6.4%) (P=0.4). Conclusions Our results suggest that 3DF leads to lower recurrence rates and a longer disease-free period for patients, without increasing complications. 3DF provides a safe, efficacious, common ground surgical approach in the treatment of Dupuytren's flexion deformity.

• 사상체질의학회지
• /
• 제18권3호
• /
• pp.57-63
• /
• 2006

1. Objectives The Face is an important standard for the classification of Sasang Contitutions. Now We are developing 3D Face Automatic Recognition Apparatus to analyse the facial characteristics. This apparatus show us 3D image of man's face and measure facial figure. We should examine accuracy of position recognition in 3D Face Automatic Recognition Apparatus. 2. Methods We took a photograph of Face status with Land Mark 8 times using Face Automatic Recognition Apparatus. Each taking-photo, We span Face statusby 10 degree. At last time, We took a photograph of Face status's lateral face. And We analysed Error Averige of Distance between seven Land Marks. So We examined the accuracy of position recognition in 3D Face Automatic Recognition Apparatus at indirectly in degree changing of Face status. 3. Results and Conclusions According to degree change of Face status, Error Averige of Distance between Seven Land Marks is 0.1848mm. In conclusion, We assessed that accuracy of position recognition in 3D Face Automatic Recognition Apparatus is considerably good in spite of degree changing of Face status

• 사상체질의학회지
• /
• 제18권3호
• /
• pp.49-56
• /
• 2006

1. Objectives We are going to develope 3D Face Recognition Apparatus to analyse the facial characteristics of the Sasangin. In the process, we should identify a Hardware Error Analysis of this Apparatus. 2. Methods We verified The resolution, the repetition ability, the Flatness and the Cylindericity of 3D Face Recognition Apparatus by measuring a triangular pyramid, an exact square pillar and a cylinder. 3. Results and Conclusions In this test, The resolution of 3D-FARA was $0.0368mm{\times}0.0594mm{\times}0.2748mm(X{\times}Y{\times}Z)$, the repetition ability was 0.1187mm, the Flatness was 0.17188mm. the Flatness of triangular pyramid was 1.39034mm and the Cylindericity of cylinder was 3.1306mm. In conclusion, If we use 3D-FARA, It is necessary to complement the site of top of the nose and the outline of face, which is likely to occur hardware error, by using software invention or attaching the Land mark to subject.