• 한국주거학회논문집
• /
• 제22권1호
• /
• pp.57-64
• /
• 2011

The purpose of this study is to investigate design elements to strengthen apartment communities in territoriality perspectives. To this end, the study first identified the functions of territoriality to communities, and examined precedent studies on community planning. Then, looking into actual apartment, the study analyzed design elements of the apartments by territoriality functions, and found significant community-building and community-strengthening elements. The results of case studies are as follows: Specific design elements are 1) both individual and shared places from the perspective of possession, 2) both physical boundaries including visible mark and physical demarcation, and emotional boundaries including space arrangement and visual expansion from the perspective of boundary-regulation, 3) both physical proximity, such as providing space for physical encounter and easy access, and emotional proximity such as homogeneity and intimacy from the perspective of proximity 4) design differentiation and adoption of the design concept to express the identity of the community from the perspective of proximity personalization.

• 음성과학
• /
• 제8권2호
• /
• pp.61-71
• /
• 2001

Speech material, which is collected from ARS(Automatic Response System), was analyzed and classified into disease and non-disease state. The material include 11 different kinds of diseases. Along with ARS speech, DAT(Digital Audio Tape) speech is collected in parallel to give the bench mark. To analyze speech material, analysis tools, which is developed local laboratory, are used to provide an improved and robust performance to the obtained parameters. To classify speech into disease and non-disease class, multi-layered neural network was used. Three different combinations of 3, 6, 12 parameters are tested to obtain the proper network size and to find the best performance. From the experiment, the classification rate of 92.5% was obtained.

• 음성과학
• /
• 제4권1호
• /
• pp.113-133
• /
• 1998

The system proposed in this paper prosodically transcribes the intonation patterns, prosodic structures, phrasings, and other prosodic aspects of Korean utterances, on four parallel tiers: a tone tier, an orthographic tier, a break index tier, and a miscellaneous tier. The tone tier employs two phrase accents (L* and H *), three accentual phrase boundary tones (L-, H-, LH-), and four intonational phrase boundary tones (L%,H%,LH%,LHL%) in order to provide a phonological transcription of pitch events associated with accented syllables and phrase boundaries. The break index tier uses five break indices, numbered from 0 to 4, which mark a prosodic grouping of words and its prosodic structure in an utterance. Among the five indices, the break index 3 and the break index 4 align with an accentual phrase boundary tone and an intonational phrase boundary tone, respectively, in the tone tier.

• 천문학회보
• /
• 제42권2호
• /
• pp.40.1-40.1
• /
• 2017

Massive early-type galaxies (ETG) have been spectroscopically confirmed up to z>3 which, together with their ages and abundances at z>1.5, implies that their progenitors must have converted gas into stars on short timescales. The termination of star formation in these galaxies can occur through several channels, but they remain largely conjectural, in part due to the current lack of direct measurements of the amount of residual gas in high redshift ETGs. Here I will present constraints on the star formation rate and dust/gas content of z=1.4-2.5 ETGs. These galaxies, close to their epoch of quenching, contained more than 2 orders of magnitude more dust than their local counterparts, which suggests the presence of substantial amounts of gas and a low star formation efficiency.

• 한국정밀공학회지
• /
• 제13권2호
• /
• pp.48-61
• /
• 1996

In the hot strip mill, not only the chatter vibration of finishing stands has a great influence on the surface quality of hot products, but also that is the major factors to shorten the life of rolling mill housings or to create the machine troubles. As long as the mill has been operating, the low frequency chatter at the early mill stands (No.2 and No.3) of POSCO's Kwangyang No.2 hot strip mill had been detected when rolling certain types of products, e.g., thinner gage, hard grade products. For several years, the experimental study was undertaken to analyze the cause of the chatter vibration and establish the methods to avoid the vibration to acceptable levels. The analysis and solution to the vibration problem with recommendations and revised maintenance practice are the subjects of this article.

• 한국정밀공학회지
• /
• 제12권8호
• /
• pp.5-18
• /
• 1995

공작기계의 정밀도는 정적, 동족 그리고 열적 특성에 좌우된다는 사실은 4장 Fig. 4-3의 예를 들어 충분히 설명한 바 있다. 4장에서는 주로 정적특성(Static behavior)에 대해서 설명한 바 있으나 이번에는 동적특성에 대해서 논술하고자 한다. 진동문제의 해소는 가공기술의 향상, 공작기계의 진보에 절대적으로 중요한 과제이다. 절삭, 연삭 및 미세가공에서 진동이 발생하여 가공을 계속할 수 없게 되거나 가공을 했다해도 가공표면에 Chatter mark를 남기게 되어 요구 품질을 만족할 수 없는 경우가 있다. 공작기계는 많은 부품을 조립하여 만든 것이기 때문에 동적현상은 다질량(Mult-mass)으로 고려해서 진동을 생각해야 겠지만 대부준의 경우 단위 질량(Single-mass) 으로 생각하여 Fig. 5-1과 같이 그 진동이론을 종합하고 있다.

• 대한화학회지
• /
• 제7권1호
• /
• pp.13-16
• /
• 1963

Thermal neutron activation analysis was applied to determine the trace amount of Vanadium and Manganese in Buyo and Kumsan Ginseng. These elements have been regarded to have great nutritional value and one of the indispensable factor in the growth of ginseng. The TRIGA MARK II Reactor in Atomic Energy Research Institute was used for the neutron source. The samples were irradiated for 10 minutes for Vanadium and for 5 minutes for Manganese at the neutron flux of about $1.28{\times}10^{12}n/cm^2/sec$ and the RCL 256 Channel Pulse-Height Analyzer connected with $2"{\times}2"$ Nal(Tl) was used for activity determination. The amounts were about 0.02 ppm for Vanadium and 20 ppm for Manganese, and it was also found that the amounts of the elements were slightly different depending on the kinds of ginsengs.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1087-1092
• /
• 1990

This paper describes the development and control of a quadruped walking robot, named as KAISER-II. The control system with multiprocessor based hierachical structure is developed. In order to navigate autonomously on a rough terrain, an identification algorithm for robot's position is proposed using 3-D vision and guide-mark pattern Also, a simple attitude control algorithm is included using force sensors. Through experimental results, it is shown that the robot can not only walk statically on even terrain but also cross over or go through the artificially made obstacles such as stairs, horizontal bar and tunnel-typed one.

• 천문학회보
• /
• 제35권2호
• /
• pp.36.1-36.1
• /
• 2010

The Redshift Search Receiver (RSR) is a sensitive, ultra-wideband spectrometer that is being built at the University of Massachusetts as one of the facility instruments for the 50-m Large Millimeter Telescope (LMT). It consists of four receivers each covering the entire 3 mm window from 74 to 111 GHz instantaneously. The primary goal of the receiver is to detect multiple molecular lines in galaxies at any distance and uniquely determine the redshift, in particular dust-obscured star forming systems at high-z which are not easily accessible. I will present some results from commissioning of the RSR on the Five College Radio Astronomy Observatory 14-m telescope, and discuss the future of the receiver.

• 한국생산제조학회지
• /
• 제19권6호
• /
• pp.760-767
• /
• 2010

Even though a flexible disk grinding process was often applied to enhance the product quality, it produced non-flat zone in the beginning and the exit (end) area. Since latter area is susceptible to poor product quality with burn mark, careful analysis is required to cope with such degradation. The flexible disk grinding exit stage was analyzed for workpiece length, wheel speed, depth of cut and feed. The exit stage qualities defined as exit stage ratio and exit stage angle or slope was characterized. A neural network application results reveled that exit stage characteristics was predicted more accurately without workpiece dimension with minimum error of 1.3%.