• Journal of Radiation Protection and Research
• /
• v.32 no.4
• /
• pp.190-193
• /
• 2007

The objective of this study is to recommend the radiation protection design parameters from the shielding point of view for concrete wall between the decay tank room and the primary pump room in TRIGA Mark-II Research Reactor Facility. The shield design for this concrete wall has been performed with the help of Point-kernel Shielding Code Micro-Shield 5.05 and this design was also validated based on the measured dose rate values with Radiation Survey Meter (G-M Counter) considering the ICRP-60 (1990) recommendations for occupational dose rate limit ($10{\mu}Sv/hr$). The recommended shield design parameters are: (i) thickness of 114.3 cm Ilmenite-Magnetite Concrete (IMC) or 129.54 cm Ordinary Reinforced Concrete (ORC) for concrete wall A (ii) thickness of 66.04 cm Ilmenite-Magnetite Concrete (IMC) or 78.74 cm Ordinary Reinforced Concrete (ORC) for concrete wall B and (iii) door thickness of 3.175 cm Mild Steel (MS) on the entrance of decay tank room. In shielding efficiency analysis, the use of I-M concrete in the design of this concrete wall shows that it reduced the dose rate by a factor of at least 3.52 times approximately compared to ordinary reinforced concrete.

• Design & Manufacturing
• /
• v.6 no.2
• /
• pp.31-36
• /
• 2012

Now days CAE has been used for almost all injection molding designs in order to find the best injection conditions. Almost all CAE use 2-D mesh, but the CAE with 2-D mesh can't indicate such as jetting, flow-mark and filling imbalance in multi cavity mold. In this study, we suggested a new 3D meshing. the method which can indicate the filling imbalance in geometrically balanced runner system with Mold Flow MPI 6.1 and we found out that the calculation times are saved. As a feasibility study, we verified that Melt Flipper, RC Pin etc appeared the balanced filling behaviors. of geometrically balanced runner system and Melt Flipper, filling imbalance was indicated more accurately.

• Journal of Forest and Environmental Science
• /
• v.33 no.3
• /
• pp.239-242
• /
• 2017

Although camera traps have been widely used to understand the abundance of wildlife in recent decades, the effort has been restricted to small sub-set of wildlife which can mark-and-recapture. The Random Encounter Model shows an alternative approach to estimate the absolute abundance from camera trap detection rate for any animals without the need for individual recognition. Our study aims to examine the feasibility and validity of the Random Encounter Model for the density estimation of endangered leopard cats (Prionailurus bengalensis) in Maekdo riparian park, Busan, South Korea. According to the model, the estimated leopard cat density was $1.76km^{-2}$ (CI 95%, 0.74-3.49), which indicated 2.46 leopard cats in $1.4km^2$ of our study area. This estimate was not statistically different from the previous leopard cat population count ($2.33{\pm}0.58$) in the same area. As follows, our research demonstrated the application and usefulness of the Random Encounter Model in density estimation of unmarked wildlife which helps to manage and protect the target species with a better understanding of their status.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.3
• /
• pp.52-58
• /
• 2014

The development of efficient systems for water quality improvement for water sources such as lakes, dams and reservoirs has become a necessity to provide not only a cleaner and safer water to the urban society, but also to provide a cleaner and safer environment for the aquatic organisms living in lakes, dams and reservoirs. This study concentrates on the outlet design and internal flow analysis of an axial flow pump used in a floating type water treatment system completely powered by renewable energy source. The treatment system is designed to raise water from depths of about 3~5m up to the water surface where it is naturally mixed with air as it is released back to the reservoir. The outlet of a typical axial flow pump is modified to suit the floating type water mixer. The performance of the axial flow pump is studied by investigating the internal flow of the system. Results show that the change in outlet shape does not alter the performance of the original pump at the maximum efficiency point as long as the cross sectional area of inlet is the same as the outlet. The axial pump for floating type water treatment system has good cavitation performance in the whole flow passage.

• Journal of the Korean Society for Library and Information Science
• /
• v.50 no.3
• /
• pp.249-265
• /
• 2016

The objective of this study is to analyze the characteristics of Cutter's Expansive Classification. The four elements about classification evaluation were applied to analyze it. Results show that first, from philosophy and religion class to literature class, the order of main classes is logical and evolutionary. Second, the notation is a pure notation including author mark. Third, the classification is expansive from first classification to seventh classification. Science classes were expanded in the second classification comparing to the first classification. From the third classification, all classes were expanded. Fourth, it was applied by the local list to indicate places emphasizing connection of geographical space.

• 한국금형공학회:학술대회논문집
• /
• 2008.06a
• /
• pp.121-127
• /
• 2008

Nowdays CAE has been used for almost all injection molding designs in order to find the best injection conditions. Almost all CAE use 2-D mesh, but the CAE with 2-D mesh can't indicate such as jetting, flow-mark and filling imbalance in multi cavity mold. In this study, we suggested a new 3D meshing. the method which can indicate the filling imbalance in geometrically balanced runner system with Mold Flow MPI 6.1 and we found out that the calculation times are saved. As a feasibility study, we verified that Melt Flipper, RC Pin etc appeared the balanced filling behaviors. of geometrically balanced runner system and Melt Flipper, filling imbalance was indicated more accurately.

• Journal of Technologic Dentistry
• /
• v.38 no.3
• /
• pp.119-125
• /
• 2016

Purpose: The purpose of this study is to evaluate the marginal gap of all-ceramic crowns fabricated by CEREC$^{(R)}$ in-office CAD/CAM system. Methods: The mandibular first molar was selected as the abutment for the experiments. Thirty working models were prepared. VITA Mark II(VM) and VITA Enamic(VE), LAVA Ultimate(LU) blocks were milled using CEREC MCXL with CEREC 3D system to construct 10 crowns for each groups. To measure marginal gap, milled restorations were examined under digital microscope with scale under 160x magnifications. The results were statistically analyzed using the one-way ANOVA and Tukey's HSD test(${\alpha}=0.05$). Results: There was no significant difference in the marginal gap regarding to ceramic materials(p>0.05). Conclusion: Single crowns fabricated using CEREC in-office CAD/CAM system provided clinically acceptable marginal gap. This confirmed that the type of ceramic material used does not determine the precision of fit of a prosthesis.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.04a
• /
• pp.190-191
• /
• 2014

Out-of-Order Packet ($O^3P$) problem is an issue that significantly impacts to the QoS of service and network. Route optimization (RO) in PMIPv6 is proposed by P.Loureiro and M. Liebsch to reduce the load of LMAs and transmission delay. In RO scheme, at the time the optimal path is established, there exist two paths: optimal path and old path as non-optimal path for transmitting data between MN1 and MN2 that is the cause of $O^3P$ occurring. This paper proposes a scheme to prevent $O^3P$ problem by using packet buffering technique and a new mobility message, named End Traffic Marker (ETM) to mark the end of packet delivery through the old path.

• Archives of Pharmacal Research
• /
• v.16 no.2
• /
• pp.89-93
• /
• 1993

Incubation of $S(-)-^3H$-nicotine with rabbit lung microsomes in the presence of dioxygen and NADPH results in the formation of metabolities that bind covalently to microsomal macro-molecules. The addition of cytochrome P-450 monooxygenase inhibitors, $\alpha$-methylbenzyl ami-nobenzotriazole and aroclor 1260, inhibited both (S)-nicotine metabolism and covalent binding. The relative rates of oxidation of nicotine $\Delta^{1',5'}$ iminium ion to continine indicates that lung $100,000\times{g}$ supematant catalyzed this oxidation approximately 18 times slower than that of liver system based on mg of protein, and increased covalent interactions. Since than that of liver system based on mg of protein, nd increased covalent interactions. Since the activity of lung iminium oxidase appears much lowr than the liver, it is tempting to speculate that localized concentrations of nicotine $\Delta^{1',5'}$ iminium ion in the lung will survive for a longer period of time. These results support that cytochrome P-450 catalyzed oxidation of nicotine leads to the formation of reactive nad electrophilic intemediates capable of chemical interactions with biomacromolecules.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.52.1-52.1
• /
• 2018

Orion Molecular Clouds Complex(OMC) 분자운에는 별 생성은 없으면서 은하면 방향으로 누워있는 큰 규모($10^{\circ}{\times}0.5^{\circ}$)의 필라멘트 구조가 있다. 본 연구는 북쪽 필라멘트(이하 NF)를 대상으로 12CO (J = 1-0) 선 관측 데이터를 이용하여 필라멘트의 운동학적 연구를 수행함으로서 은하면과의 상관관계를 알아보고자 하였다. 관측은 공간분해능은 2 arcmin인 SRAO(Seoul Radio Astronomy Observatory)의 6m 밀리미터 망원경이 사용되었고 큰 규모로 인해 은하면으로부터 먼 순서로 NF1, NF2, NF3 세 곳으로 관측 지역이 정해졌다. 연구결과 필라멘트는 매우 낮은 수준의 12CO (J = 2-1)과 티끌 분포에서 자기장을 따라 은하면 방향으로 연계되어 보였다. 밀도 분포에서는 SRAO 12CO (J = 1-0) 적분강도와 Planck 위성의 12CO (J = 2-1)과 티끌 자료를 이용했을 때, 12CO와 성간 티끌은 주로 은하면에 수직인 방향에서 밀도가 높았다. 속도 분포와 위치 속도 분석을 통해 NF는 단일 구조의 분자운 형태이고 NF2 하단에서는 회전 운동의 가능성이 확인되었다. NF3는 자기장에 의해 생성된 나선형 회전을 하고 있으며, NF2와 NF3를 따라 은하면을 향하여 12CO (J = 1-0)를 비롯한 물질이 흐르고 있음도 확인되었다. 하지만 은하면을 향하여 물질이 흐르는 원인을 제공하는 천체가 무엇인지와 NF1과 NF2 상단의 회전 운동은 확인 할 수 없었으며 이들 지역에 대한 상세한 관측이 요구된다.