• Journal of Communications and Networks
• /
• 제6권3호
• /
• pp.216-225
• /
• 2004

In a cellular network, if there are too many data users in a cell, data may suffer long delay, and system's quality-of-service (QoS) will degrade. Some traditional schemes such as dynamic channel-allocation scheme (DCA) will assign more channels to hot (or overloaded) cells through a central control system (CC) and the throughput increase will be upper bounded by the number of new channels assigned to the cell. In mobile-assisted data forwarding (MADF), we add an ad-hoc overlay to the fixed cellular infrastructure and special channels-called forwarding channels- are used to connect mobile units in a hot cell and its surrounding cold cells without going through the hot cell's base station. Thus, mobile units in a hot cell can forward data to other cold cells to achieve load balancing. Most of the forwarding-channel management work in MADF is done by mobile units themselves in order to relieve the load from the CC. The traffic increase in a certain cell will not be upper bounded by the number of forwarding channels. It can be more if the users in hot cell are significantly far away from one another and these users can use the same forwarding channels to forward data to different cold neighboring cells without interference. We find that, in a system using MADF, under a certain delay requirement, the throughput in a certain cell or for the whole net-work can be greatly improved.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.377-380
• /
• 2002

When it calculates the optimum price of filter coefficient, the many operation quantity is necessary. Is like that the real-time control is difficult and the hardware embodiment expense is big. The case which does not know advance information of input signal or the case where the statistical nature changes with change of surroundings environment is necessary the adaptive filter. Every hour to change a coefficient automatically and system in order to reach to the condition of optimum oneself, the fact that is the adaptive filter. When it does not the quality of input signal or it does not know the environment of surroundings every hour changing, it does not emit not to be, in order to collect, the fact that is the adaptive filter. The case of the Acoustic Echo Canceler does thousands filter coefficients in necessity. It reduces a many calculation quantity to respect, it uses the IIR filter from hour territory. Also it uses the block adaptive filter which has a block input signal and a block output signal. The former there is a weak point where the stability discrimination is always demanded. Consequently, The block adaptive filter is researched plentifully. This dissertation planned the block MADF adaptive filter used to MADf algorithm.

• 한국통신학회논문지
• /
• 제26권9B호
• /
• pp.1226-1235
• /
• 2001

The convergence analysis of the improved multiplication free adaptive digital filter (IMADF) with a fractionally-spaced equalizer (FSE) to remove the intersymbol interference (ISI) in fast data transmission is presented. The IMADF structure use the one-step predicted filter in the multiplication-free adaptive digital filter (MADF) structure using the DPCM and Sign algorithm. In the experimental results, the IMADF algorithm has reduced the computational complexity by use of only the addition operation without a multiplier. Also, under the condition of identical stationary-state error, it could obtain the stabled convergence characteristic that the IMADF algorithm is almost same as the sign algorithm, but is better than the MADF algorithm. Here, this algorithm has effective characteristics when the correlation of the input signal is highly.

• 소성∙가공
• /
• 제28권5호
• /
• pp.257-265
• /
• 2019

Multi-axial forging (MAF), a severe plastic deformation technique, is known to be difficult to obtain materials with homogeneous microstructures. Recently, multi-axial diagonal forging (MADF) process has been developed to solve this problem. In this study, in order to compare the microstructural and mechanical homogeneities of the MAFed and MADFed samples, oxygen-free copper (OFC) cubes measuring 25 mm in length were deformed through MAF and MADF processes and the average grain size and hardness were measured at the edge, face, and center regions of the samples. In the MAFed samples, ultrafine grains were formed at the center region, but a considerable amount of coarse grains remain at the face region. Therefore, the MAFed samples showed a high inhomogeneity in regards to grain size and hardness. On the contrary, in the case of the MADFed sample, the grain sizes at the edge, face, and center regions were similar and the hardness in all the regions are almost similar. This indicates that the MADFed sample has a homogeneous microstructure and uniform mechanical properties, which can be attributed to the homogeneous distribution of the effective strain throughout the material. The results of this study suggests that the MADF is a suitable process in the fabrication of high-strength copper materials with a homogeneous and ultrafine grain structure.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권7호
• /
• pp.1063-1069
• /
• 1999

Wheat straw samples (3-4 cm) were sprayed with solutions of urea (U) alone or with a dry addition of garden soil (GS), midden soil (MS), soya bean meal (SM) or jack bean meal (JM) as crude urease sources and with a pure urease (UR) enzyme. Each of the urease sources was included at two levels: 30 and 60 g/kg except pure urease, which was added at a level of 2.5 & 5.0 g/kg treated straw dry matter. Untreated straw without urease source was used as a control. After treatment, samples were sealed in polythene bags and stored for 2, 7, 14, 21 and 35 days at $19{^{\circ}C}$. The urease sources, their levels and treatment time produced significant effects on ammonia production (p<0.01). The addition of urease offered more flexibility in hydrolyzing urea in the shortest possible time. Incorporation of soya bean and jack bean meal was effective in reducing the modified acid detergent fiber (MADF) content of straw and the same time increasing organic matter (OM) digestibility. Overall effect, addition of soya bean to urea at a ratio of 1:1 appeared to be the most satisfactory urease source for the treatment of urea and wheat straw.

• 전자공학회논문지B
• /
• 제29B권11호
• /
• pp.8-15
• /
• 1992

This paper analyzes the properties of such algorithm that corresponds to the LMS algorithm with additional update terms, parameterized by the scalar factors $\alpha$ and $\beta$, and presents its structure. The analysis of convergence leads to complex eigenvalues of the transition matrix for the mean weight vector. Regions in which the algorithm becomes stable are demonstrated. The computational cmomplexities of MLMS algorithms are compared with those of MADF, sign and the conventional LMS algorithms. In application of the system identification the second order momentum MLMS algorithm has faster convergence speed than LMS and the first order MLMS algorithms.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2005년도 가을 학술발표논문집 Vol.32 No.2 (2)
• /
• pp.730-732
• /
• 2005

본 논문에서는 자율적인 다수의 에이전트들이 협력하여 미지의 공간을 탐사하는 실시간 그래프 탐색 알고리즘인 MADFS를 제안하고 그 효율성을 분석한다. 이 알고리즘은 깊이-우선 탐색(DFS)에 기초한 단일 에이전트 공간 탐사 알고리즘인 dFS-RTA* 와 DFS-PHA* 를 멀티 에이전트 환경에 적합하게 에이전트 간 정보공유 방식과 방문노드 선택전략을 설계하여 확장하였다. 본 논문에서는 대표적인 3차원 온라인 게임 환경인 Unreal Tournament 게임과 지능형 캐릭터 에이전트인 KGBot를 이용한 실험을 통해 알고리즘의 완전성과 효율성을 분석해본다.

• 소성∙가공
• /
• 제28권2호
• /
• pp.98-104
• /
• 2019

The present study numerically simulates the deformation heterogeneity developed in AA1100 during multi-axial diagonal forging (MADF) using finite element analysis (FEA). Diagonal forging type consisting of diagonal forging (DF) and return-diagonal forging (R-DF) proved to be relatively beneficial compared to plane forging type which includes plane forging (PF) and return-plane forging (R-PF) for minimizing the non-uniformity of deformation developed in workpieces. Simulation of the effective strain generated in workpieces during the two types of forging was done using 3-D FEA. FEA shows the effect of friction coefficient on the deformation behavior on workpieces. The simulation of 2 types forging with different friction coefficients revealed that the magnitude of barreling effect and strain heterogeneity in workpieces increases with an increase in the friction coefficient.