• 제목/요약/키워드: M3K

검색결과 53,919건 처리시간 0.072초

인산석고 취급공정에서의 라돈농도 및 유효선량 수준 평가 (Evaluation of Effective Dose and Exposure Level of Radon in Process Handling NORM)

  • 정은교;장재길;김종규;김준범;권지운
    • 한국산업보건학회지
    • /
    • 제28권3호
    • /
    • pp.283-291
    • /
    • 2018
  • Objectives: To monitor the radon concentration level in plants that handle phosphorus rock and produce gypsum board and cement, and evaluate the effective dose considering the effect of radon exposure on the human body. Methods: Airborne radon concentrations were measured using alpha-track radon detectors (${\alpha}$-track, Rn-tech Co., Korea) and continuous monitors (Radon Sentinel 1030, Sun Nuclear Co., USA). Radon concentrations in the air were converted to radon doses using the following equation to evaluate the human effects due to radon. H (mSv/yr) = Radon gas concentration x Equilibrium factor x Occupancy factor x Dose conversion factor. The International Commission on Radiological Protection (ICRP) used $8nSv/(Bq{\cdot}hr/m^3)$ as the dose conversion factor in 2010, but raised it by a factor of four to $33nSv/(Bq{\cdot}hr/m^3)$ in 2017. Results: Radon concentrations and effective doses in fertilizer manufacturing process averaged $14.3(2.7)Bq/m^3$ ($2.0-551.3Bq/m^3$), 0.11-0.54 m㏜/yr depending on the advisory authority and recommendation year, respectively. Radon concentrations in the gypsum-board manufacturing process averaged $14.9Bq/m^3$ at material storage, $11.4Bq/m^3$ at burnability, $8.1Bq/m^3$ at mixing, $10.0Bq/m^3$ at forming, $8.9Bq/m^3$ at drying, $14.7Bq/m^3$ at cutting, and $10.5Bq/m^3$ at shipment. It was low because it did not use phosphate gypsum. Radon concentrations and effective doses in the cement manufacturing process were $23.2Bq/m^3$ in the stowage area, $20.2Bq/m^3$ in the hopper, $16.8Bq/m^3$ in the feeder and $11.9Bq/m^3$ in the cement mill, marking 0.12-0.63 m㏜/yr, respectively. Conclusions: Workers handling phosphorous gypsum directly or indirectly can be assessed as exposed to an annual average radon dose of 0.16 to 2.04 mSv or 0.010 to 0.102 WLM (Working Level Month).

유등천 수원확보 규모와 하류 하천유지유량의 상관성 (Increase of Downstream Minimum Flow Followed by Increase of Water Storage Size in Yudeungcheon Upstream)

  • 노재경;김용국;이재남
    • 농업과학연구
    • /
    • 제37권2호
    • /
    • pp.285-293
    • /
    • 2010
  • To secure instream flow at the Yudeung urban stream reach of Daejeon city in South Korea, Yudeung upstream diversion was designed with total water storage of $59{\times}10^4m^3$, and the upstream Seongol reservoir was planned to raise the bank with various sizes. Downstream streamflows were simulated by considering outflows from upstream diversion and reservoir, and after then flow durations were analyzed and compared with flows of no reservoir condition. In case of no diversion or reservoir upstream, flow durations were $1^{st}$ flow of $84.72m^3/s$, $95^{th}$ flow of $2.10m^3/s$, $185^{th}$ flow of $0.92m^3/s$, $275^{th}$ flow of $0.42m^3/s$, and $355^{th}$ flow of $0.31m^3/s$. In case of upstream diversion, flow durations were $1^{st}$ flow of $94.38m^3/s$, $95^{th}$ flow of $2.96m^3/s$, $185^{th}$ flow of $1.22m^3/s$, $275^{th}$ flow of $0.50m^3/s$, and $355^{th}$ flow of $0.35m^3/s$. The increase flow rates were $0.04m^3/s$ in $355^{th}$ flow, $0.08m^3/s$ in $275^{th}$, and $0.30m^3/s$ in 185th. In case of Seongol reservoir with effective storage capacities of $365{\times}10^4m^3$, $544{\times}10^4m^3$, $750{\times}10^4m^3$, and $992{\times}10^4m^3$, flow durations were $85.5{\sim}83.9m^3/s$ on $1^{st}$ flow, $2.85{\sim}2.57m^3/s$ on $95^{th}$ flow, $1.16{\sim}1.27m^3/s$ on $185^{th}$ flow, $0.64{\sim}0.99m^3/s$ on $275^{th}$ flow, and $0.56{\sim}0.94m^3/s$ on $355^{th}$ flow. The increase flow rates were $0.25{\sim}0.63m^3/s$ in $355^{th}$ flow, $0.22{\sim}0.57m^3/s$ in $275^{th}$, and $0.24{\sim}0.35m^3/s$ in $185^{th}$. The more the sizes of upstream reservoirs increased, the $1^{st}$ and $95^{th}$ flows decreased in which coefficients of determination were 0.92, 0.99, respectively and the $185^{th}$, $275^{th}$, and $355^{th}$ flows increased in which coefficients of determination were 0.93 to 0.99.

Selective Monitoring of Rutin and Quercetin based on a Novel Multi-wall Carbon Nanotube-coated Glassy Carbon Electrode Modified with Microbial Carbohydrates α-Cyclosophorohexadecaose and Succinoglycan Monomer M3

  • Jin, Joon-Hyung;Cho, Eun-Ae;Kwon, Chan-Ho;Jung, Seun-Ho
    • Bulletin of the Korean Chemical Society
    • /
    • 제31권7호
    • /
    • pp.1897-1901
    • /
    • 2010
  • Multi-wall carbon nanotube (MWNT)-modified glassy carbon electrodes (GCE) were prepared for simultaneous determination of rutin and quercetin. Microbial carbohydrates, $\alpha$-cyclosophorohexadecaose ($\alpha$-C16) and succinoglycan monomer M3 (M3) were doped into MWNTs to prepare a $\alpha$-C16-doped MWNT-modified GCE (($\alpha$-C16 + MWNTs)/GCE) and a M3-doped MWNT-modified GCE ((M3 + MWNTs)/GCE), respectively. The sensitivities of the ($\alpha$-C16 + MWNTs)/GCE to rutin and quercetin were 34.7 ${\mu}A\cdot{\mu}M^{-1}{\cdot}cm^{-2}$ and 18.3 ${\mu}A\cdot{\mu}M^{-1}{\cdot}cm^{-2}$, respectively, in a linear range of $2\sim8{\mu}M$ at pH 7.2. The sensitivities of the (M3 + MWNTs)/GCE was 2.44 ${\mu}A\cdot{\mu}M^{-1}{\cdot}cm^{-2}$ for rutin and 7.19 ${\mu}A\cdot{\mu}M^{-1}{\cdot}cm^{-2}$ for quercetin without interference.

$GF(3^m)$상의 전류모드 CMOS 승산기 설계 (Design of $GF(3^m)$ Current-mode CMOS Multiplier)

  • 나기수;변기녕;김흥수
    • 전기전자학회논문지
    • /
    • 제8권1호
    • /
    • pp.54-62
    • /
    • 2004
  • 본 논문에서는 $GF(3^m)$상의 전류모드CMOS 승산기의 설계에 관하여 논의한다. 피 승산항에 원시원소 α를 곱함으로써 나타나는 피 승산항의 변화를 표준기저 표현을 이용하여 수식으로 전개하였다. $GF(3^m)$ 승산 회로를 구성하기 위하여 전류모드 CMOS를 사용하여 GF(3)상의 가산기와 승산기를 설계하였고 시뮬레이션 결과를 보였다. 기본 게이트들을 이용하여 $GF(3^m)$ 승산기를 설계하였고 m=3인 경우에 대하여 예를 보였다. 본 논문에서 제안한승산회로는 그 구성이 블록의 형태로 이루어지므로 $GF(p^m)$ 상에서 p와 m에 대한 확장이 용이하며, VLSI 구현에 유리하다 할 수 있다. 본 논문에서 제안한승산회로를 타 승산회로와 비교하였고, 개선효과를 확인하였다.

  • PDF

해양세균 Streptomyces sp. M3로 부터 얻은 재조합 polyG-specific lyase의 특성 (Characterization of Recombinant PolyG-Specific Lyase from a Marine Bacterium, Streptomyces sp. M3)

  • 김희숙
    • 생명과학회지
    • /
    • 제20권11호
    • /
    • pp.1582-1588
    • /
    • 2010
  • 전 연구에서 해양세균 Streptomyces sp. M3의 새로운 alginate 분해효소를 signal peptide가 제거된 상태로 클로닝하고 E. coli BL21 (DE3) 균에 형질전환시켰다. 본 연구에서는 배양할 때 IPTG를 첨가하여 M3 alginate 분해효소 단백질을 과발현시키고 Ni-Sepharose 친화력 chromatography로 정제하여 생화학적 성질을 조사하였다. 기질특이성을 시험하기 위한 235 nm에서의 흡광도와 TLC 분석 결과로부터 M3 alginate 분해효소가 polyG block에 기질특이성을 나타냄을 알 수 있었다. M3 분해효소를 기질과 10분 동안 반응시켰을 때, 최적 pH 및 최적온도는 pH 9 및 $60^{\circ}C$이었다. 1 mM $Ca^{++}$$Mn^{++}$은 alginate 분해활성을 2배 증가시킨 반면 $Hg^{++}$$Zn^{++}$는 분해활성을 완전히 저해하였다. $Mg^{++}$, $Co^{++}$, $Na^+$, $K^+$, 및 $Ba^{++}$은 M3 alginate 분해효소의 활성에 거의 영향을 미치지 않았다.

생쥐 착상전 배아의 인슐린 신호전달 과정에 Phosphatidylinositol 3-Kinase의 관련성 (Involvement of Phosphatidylinositol 3-Kinase in the Insulin Signaling in Preimplantation Mouse Embryos)

  • Gye, Myung-Chan;Nah, Hee-Young;Kim, Moon-Kyoo
    • 한국발생생물학회지:발생과생식
    • /
    • 제4권1호
    • /
    • pp.29-35
    • /
    • 2000
  • A phosphatidylinositol 3-kinase (PI3K)는 인슐린 신호전달의 상위구성 요소로 다양한 세포에서 단백질합성을 촉진한다. PI3K와 하위의 mammalian target of rapamycin (mTOR)가 착상전 생쥐 배아의 인슐린 신호전달에 관여하고 있는지의 여부를 조사하고자 하였다. 생쥐의 8-세포기 배아를 인슐린 또는 PI3K및 mTOR의 억제제를 포함한 조건에서 배양하면서 발생율, 할구수, 단백질합성 및 인산화를 조사하였다. 인슐린의 첨가는 포배형성과 부화 등 형태발생을 촉진하며 포배내 평균 할구수, 8-세포기 배아의 단백질 합성과 인산화를 유의하게 증가시켰다. PI3K의 억제제인 wortmannin과 mTOR를 억제하는 rapamycin은 인슐린에 의한 발생율, 포배내, 할구수, 단백질합성의 증가 효과를 상쇄하였다. 오토라디오그라피에서 두종의 인산화단백질인 pp22와 pp30의 인산화가 인슐린 처리에 의해 증가함을 확인하였다. 이상의 결과에서 생쥐 8-세포기 배아의 발생을 촉진하는 인슬린 신호의 전달에 PI3K와 mTOR가 관여함을 알 수 있다.

  • PDF

마늘주아(珠芽)에 대한 KNO3및 K3PO4 처리(處理)와 파종시기(播種時期)가 종구(種球) 생산(生産)에 미치는 영향(影響) (Effect of Soaking in KNO3 or K3PO4 Solution and Sowing Date of Bulbils on the Seed Bulbs Production of Garlic (Allium sativum L.))

  • 조영조;정병용
    • 원예과학기술지
    • /
    • 제16권2호
    • /
    • pp.219-221
    • /
    • 1998
  • '남도' 마늘의 주아를 이용한 종구 생산성을 검토하기 위하여 주아를 200mM $K_3PO_4$와 200mM $KNO_3$ 용액에 파종전 침지처리(7일간, $10^{\circ}C$)한 후 파종기를 9월 20일, 10월 10일 및 10월 30일로 달리하여 시험하였다. 출현속도는 파종기가 늦을수록 빨라졌는데 10월 10일 $K_3PO_4$ 처리에서 출현소요일수가 단축되었다. 식물체 생육 역시 $K_3PO_4$ 처리후 10월 10일 파종에서 우수하였다. 인편분화율은 모든 처리구에서 85% 이상이었고, 평균구종은 파종시기가 빠를수록 높았다. 수량은 $K_3PO_4$ 처리후 10월 10일 파종이 무처리에 비해 27% 중수되어 주아를 마늘 파종적기에 화학제를 처리함으로써 더 많은 종구를 획득할 수 있었다.

  • PDF

M-Dephanox 공정 질소 제거 효율 향상 방안에 관한 연구 (The Study for Enhancement of Nitrogen Removal Efficiency in M-Dephanox Process)

  • 류홍덕;이상일
    • 한국물환경학회지
    • /
    • 제22권1호
    • /
    • pp.74-82
    • /
    • 2006
  • In this study, development of M2-Dephanox and M3-Dephanox process has been tried to enhance the nitrogen removal of M-Dephanox process on the basis of previous study about M-Dephanox. The results showed that T-N removal efficiency of M3-Dephanox process was 8.9% or 11.3% higher than M-Dephanox or M2-Dephanox processes, respectively. This result is due to the lower $NO_3{^-}-N$ concentration in the effluent of M3-Dephanox than of M-Dephanox and M2-Dephanox processes. This results were recurrenced by PASS simulator. As result of simulation by PASS program, effluent $NO_3{^-}-N$ concentration of M3-Dephanox process was 1.4 mg/L and 3.6 mg/L lower than M-Dephanox and M2-Dephanox processes. In the study about optimization of M3-Dephanox processes by PASS program, SRT greatly affected T-N removal of M3-Dephanox process, whereas, the recycle rate and recirculation rate did little affect T-N removal efficiency of M3-Dephanox. In the study about optimization of reactors following the nitrification reactor of M3-Dephanox process, it was shown that the best optimum volume ratio of denitrification reactor, intermittently aerated reactor and anoxic reactor for the T-N removal were 29.1(%) : 32.7(%) : 38.2(%). T-N removal efficiency at this volume ratio was similar to T-N removal efficiency at the volume ratio of 36.3(%) : 36.3(%) : 27.4(%) designed for the lab-scale M3-Dephanox.

울산 대기 중 중금속 분포특성 (Distribution Characteristics of Heavy Metals in the Ambient Air of Ulsan Area)

  • 문지용;김영복;이지영;정기호
    • 분석과학
    • /
    • 제14권5호
    • /
    • pp.442-450
    • /
    • 2001
  • 본 연구에서는 2000년 3월부터 9월까지 울산지역의 대기 중 미세먼지를 포집하여 중금속의 분포 특성을 살펴보고 그 오염 정도를 파악하고자 하였다. 시료는 마이크로파를 이용하여 전처리를 하였으며, 중금속(크롬, 구리, 아연, 카드뮴, 니켈, 비소, 그리고 납)에 대한 분석은 유도결합 플라스마 질량분석기를 사용하여 정량하였다. 대기 중 미세 먼지의 최대 양은 $85.6{\mu}g/m^3$로 타났으며 평균은 $37.1{\mu}g/m^3$였다. 각 중금속의 최대 농도는 철 $2.5{\mu}g/m^3$ (여천동), 아연 $0.41{\mu}g/m^3$ (남목2동), 카드뮴 $0.061{\mu}g/m^3$ (여천동), 납 $0.20{\mu}g/m^3$ (여천동), 니켈 $0.037{\mu}g/m^3$ (여천동), 구리 $0.88{\mu}g/m^3$ (야음동), 크롬 $0.042{\mu}g/m^3$ (야음동), 그리고 비소는 $0.015{\mu}g/m^3$ (온산)를 나타냈다. 중금속 농도 사이의 상관성을 살펴본 결과 남목2동에서 니켈과 아연이 상관계수 0.87로 가장 높은 상관관계를 나타내었다.

  • PDF

Acetonitrile에서의 Mg-EBT$^-$ 착물에 관한 연구 (Studies of Magnesium-Eriochrome Black T Complex in Acetonitrile)

  • 박두원;최원형;이흥락
    • 대한화학회지
    • /
    • 제17권4호
    • /
    • pp.256-261
    • /
    • 1973
  • Mg(II)과 Eriochrome Black T가 Acetonitrile용액속에서 반응하여 만든 착물을 일정한 이온의 세기와 일정한 수소이온농도에서 분광광도법으로 연구했다. 유리전극과 Ag/0.1 M $AgNO_3$기준전극쌍을 써서 Acetonitrile 용액속에서 측정한 pH 값은 표준완충용액으로 검정했으며 그 결과는 다음과 같다. Picric acid$-10^{-3}M$ tetramethylammonium picrate 완충용액에 있어서는 은기준전극에 대한 유리 전극의 $25^{\circ}C$에서의 전위는 $E_{glass}=716+59.1logA_{H+}[mv]$이고, 1,3-Diphenylguanidine$-3{\times}10^{-3}M $1,3-diphenylguanidine perchlorate 완충용액에서는 $E_{glass}=1,193+59.1 logA_{H+}[mv]$이다. 리간드 Eriochrome Black T의 산해리지수$ pK_{H,EBT-}$는 9.1이었으며, 반응 $H_mEBT^{(3-m)-} + Mg^{2+} {\leftrightarrow}MgEBT^{-} + mH^{+}$ 으로 생성된 착물 $MgEBT^{-}$의 조건안정도상수를 log-ratio method으로 구하니 m이 2일때는 $logK_{MgEBT^-} + 3.97$이고, m이 1일 때는 $logK_{MgEBT^-} + 5.02$이었다. 착물의 조성은 수용액에서 Schwarzenbach씨 등이 구한 결과와 같이 비수용매 Acetonitrile속에서도 한 종류의 착물 $MgEBT^{-}$만이 생성됨을 알 수 있었다.

  • PDF