• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.387-387
• /
• 2017

인공함양 시설을 설계 및 운영하는 단계에서 설치 예정부지의 자연적 특성(지형, 지질, 기후 등)과 인공적 특성(주입정과 양수정의 거리, 주입량, 양수량 등)은 중요한 인자라고 볼 수 있다. 인공함양 예정 부지의 개념모델을 설정하고 수리전도도와 이격거리(주입정과 양수정의 직선거리)에 대한 민감도 분석을 수행하였다. 인공함양 예정 부지는 충적대수층이며, 인공함양 주입량과 양수량은 $150m^3/day$로 동일하게 설정하였다. HydroGeoSphere 모델링을 통한 민감도 분석은 수리전도도($10^{-1}cm/sec$, $10^{-2}cm/sec$, $10^{-3}cm/sec$, $10^{-4}cm/sec$)와 이격거리(10 m, 50 m, 100 m) 조건에 대해 총 12회 수행하였다. 수리전도도가 $10^{-1}cm/sec$ 및 $10^{-2}cm/sec$인 경우의 모델링 결과, 이격거리가 100 m 범위 이내에서는 지하수위 변동이 발생하지 않았다. 수리전도도가 $10^{-3}cm/sec$인 경우의 모델링 결과, 이격거리가 10 m일 때 5 m 이내의 수위하강이 발생하고 영향반경은 약 14 m 정도로 나타났고, 이격거리가 50 m일 때 5 m 이내의 수위하강이 발생하고 영향반경은 약 31 m 정도로 나타났고, 이격거리가 100 m일 때 5 m 이내의 수위하강이 발생하고 영향반경은 약 34 m 정도로 나타났다. 수리전도도가 $10^{-4}cm/sec$인 경우의 모델링 결과, 이격거리가 증가할수록 양수에 의한 수위하강과 영향반경이 증가하였으며, 낮은 수리전도도로 인해 양수로 인한 수두손실을 회복할 수 없었기에 양수정 주변에서 반경 수십 m 이상의 수두하강 영역을 형성하고 주입정 근처에서는 주입속도가 대수층의 투수능력에 비해 상당히 높기 때문에 5 m 정도의 수위상승이 나타났다. 모델링 결과를 분석하여, 수리전도도가 $10^{-3}cm/sec$ 이하이고 이격거리가 10 m 범위 이상인 충적대수층에 $150m^3/day$를 주입하면서 동시에 $150m^3/day$를 양수하는 시스템에서는 지하수위변동이 발생하므로 주입량과 양수량의 조절이 필요하다는 것을 확인하였다.

• Journal of the Korean Magnetics Society
• /
• v.21 no.1
• /
• pp.15-22
• /
• 2011

It is necessary to describe the hysteresis characteristics of magnetic material precisely for the analysis or design of system with ferromagnetic materials. Although Preisach model is regarded as the most accurate method to describe the hysteresis characteristics, it is not widely applied to the real systems because of some difficulties. The conventional Preisach model shows the numerical instabilities during the iterative computations because the density distribution obtained from the sets of M-H curves are strongly localized. To remove such numerical instabilities, M-B instead of M-H is adopted as an implementation variable in normal Preisach modeling. The two dimensional computations with hysteresis characteristics by using normal Preisach modeling are tested and the result showed that the modeling by using M-B variables showed better stabilities than M-H variables.

• Economic and Environmental Geology
• /
• v.37 no.5
• /
• pp.499-508
• /
• 2004

Changwon City first constructed riverbank filtration plants in Book-Myeon and Daesan-Myeon in Korea in the year 2001. This study evaluated hydrogeological characteristics and groundwater flow simulation between the Nakdong River and the fluvial aquifers adjacent to the river in Book-Myeon, Changwon City. The groundwater simulation calculated the influx rate from the Nakdong River and the fluvial aquifers to pumping wells through the riverbank filtration system. The groundwater flow model utilized drilling, grain size analysis, pumping test, groundwater level measurements, river water discharge and rainfall data. Hydraulic heads calculated by the steady-state model closely matched measured heads in pumping and observation wells. According to the transient flow model, using a total pumping amount of 14,000 $m^3$/day, the flux into the pumping wells from the Nakdong River accounts for 8,390 $m^3$/day (60%), 590 $m^3$/day (4%) is from the aquifer in the rectilinea. direction to the Nakdong River, and 5,020 $m^3$/day (36%) is from the aquifer in the parallel direction to the Nakdong River. The particle tracking analysis shows that a particle from the Nakdong River moves toward the pumping wells at a rate of about 1.85 m/day and a particle from the aquifer moves toward the pumping wells at a rate of about 0.75 m/day. This study contributes to surface water/groundwater management modeling, and helps in understanding, how seasonal change affects pumping rates, water quality, and natural recharge.

• Journal of the Korea Society for Simulation
• /
• v.27 no.3
• /
• pp.37-44
• /
• 2018

In applying modeling and simulation (M&S) techniques to analyze complex discrete event dynamic systems, conventionally users had to use different simulation environments depending on the user-level. To solve the inconvenience, this paper proposes an integrated development environment for M&S depending on user-level and a formalized interface to manage the model in the development environment efficiently. The interface consists of an extended DEVS formalism and model making rules. The development environment is divided into a modeling environment and a simulation environment. In the modeling environment, three modeling methods are provided for each level of the users. Users inputs several parameters to the model generated as a result of the modeling process, and experiments in various cases by using the simulation environment. The case study shows the implementation of the proposed M&S environment, and using the implemented environment, it shows the M&S process of the complex defense combat system.

• Journal of the Geological Society of Korea
• /
• v.54 no.5
• /
• pp.545-556
• /
• 2018

This study was conducted to estimate the deep percolation using numerical modeling and field observation data based on rainfall in Haean basin. Soil moisture sensors were installed to monitoring at 30, 60 and 90 cm depths in four sites (YHS1-4) and automatic weather station was installed to around YHS3. Soil moisture and meteorological data was observed from March 25, 2017 to March 25, 2018 and May 06, 2016 to May 06, 2018, respectively. Numerical analysis was performed from June to August, 2017 using the HYDRUS-1D. Average soil moisture contents were high to generally in YHS3 for 0.300 to $0.334m^3/m^3$ and lowest in YHS1 for 0.129 to $0.265m^3/m^3$ during the soil moisture monitoring period. The results of soil moisture flow modeling showed that field observations and modeling values were similar but the peak values were larger in the modeling result. Correlation analysis between observation and modeling data showed that r, $r^2$ and RMSE were 0.88, 0.77, and 0.0096, respectively. This show high correlation and low error rate. The total deep percolation was 744.2 mm during the period of modelling at 500 cm depth. This showed that 61.3% of the precipitation amount (1,214 mm) was recharged in 2017. Deep percolation amount was high in the study area. This study is expected to provide basic data for the estimation of groundwater recharge through unsaturated zone.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.5
• /
• pp.619-628
• /
• 2009

LiDAR has capability of rapid data acquisition and provides useful information for reconstructing surface of the Earth. However, Extracting information from LiDAR data is not easy task because LiDAR data consist of irregularly distributed point clouds of 3D coordinates and lack of semantic and visual information. This thesis proposed methods for automatic extraction of buildings and 3D detail modeling using airborne LiDAR data. As for preprocessing, noise and unnecessary data were removed by iterative surface fitting and then classification of ground and non-ground data was performed by analyzing histogram. Footprints of the buildings were extracted by tracing points on the building boundaries. The refined footprints were obtained by regularization based on the building hypothesis. The accuracy of building footprints were evaluated by comparing with 1:1,000 digital vector maps. The horizontal RMSE was 0.56m for test areas. Finally, a method of 3D modeling of roof superstructure was developed. Statistical and geometric information of the LiDAR data on building roof were analyzed to segment data and to determine roof shape. The superstructures on the roof were modeled by 3D analytical functions that were derived by least square method. The accuracy of the 3D modeling was estimated using simulation data. The RMSEs were 0.91m, 1.43m, 1.85m and 1.97m for flat, sloped, arch and dome shapes, respectively. The methods developed in study show that the automation of 3D building modeling process was effectively performed.

• The Journal of the Korea Contents Association
• /
• v.8 no.1
• /
• pp.212-227
• /
• 2008

Since 3D face can be rotated freely in 3D space and illumination effects can be modeled properly, 3D face modeling Is more precise and realistic in face pose, illumination, and expression than 2D face modeling. Thus, 3D modeling is necessitated much in face recognition, game, avatar, and etc. In this paper, we propose a 3D face modeling method based on 3D morphable shape modeling. The proposed 3D modeling method first constructs a 3D morphable shape model out of 3D face scan data obtained using a 3D scanner Next, the proposed method extracts and matches feature points of the face from 2D image sequence containing a face to be modeled, and then estimates 3D vertex coordinates of the feature points using a factorization based SfM technique. Then, the proposed method obtains a 3D shape model of the face to be modeled by fitting the 3D vertices to the constructed 3D morphable shape model. Also, the proposed method makes a cylindrical texture map using 2D face image sequence. Finally, the proposed method builds a 3D face model by rendering the 3D face shape model with the cylindrical texture map. Through building processes of 3D face model by the proposed method, it is shown that the proposed method is relatively easy, fast and precise than the previous 3D face model methods.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.4
• /
• pp.289-299
• /
• 2019

Attitude control modeling and simulation (M&S) can be extensively applied in overall development process, from simple algorithm design to on-board software verification. This paper introduces CMG-based attitude control M&S software, which consists of 6-DOF modeling (CMG and space environments modeling), and attitude control algorithm. The M&S software is divided into three modules, from an inner CMG motor control module to an outer earth observation mission module. While an application of this developed software is currently limited to the initial-phase attitude controller development, its application area can be extended to the later-phases by considering sophisticated model information in future.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.441-441
• /
• 2011

정부에서 기후변화로 인한 홍수와 가뭄, 수질개선 등 물 문제 해결을 위해 시행하고 있는 4대 강사업을 아직도 언론이나 환경단체, 대다수의 국민들이 보 건설로 인해 홍수의 위험성이 높아지고, 수질이 악화되어 생태계와 생명이 파괴된다고 오해하고 있다. 이런 오해를 불식시키기 위해 남한강유역의 보 건설 공사 전 후의 발생 가능한 수리변화 예측을 통하여 4대강사업에 따른 수리 수질 논란에 대비하고, 기존의 수위-유량 곡선식 및 홍수분석시스템 변화에 따른 개선을 통하여 보 건설 후 댐과 보의 운영시 각 보 지점의 수리분석을 통해 적절한 방류 규모, 시기를 결정하고 하류영향을 효과적으로 분석하는 등 환경변화에 대한 사전 대책마련을 위해 EFDC 모형을 구축하였다. 본 연구는 한강유역의 팔당댐을 기준으로 북한강 10km, 경안천 10km, 남한강 65km 구간의 공사 전 후 수위변화를 분석하기위해 남한강 유역의 2006년도부터 2010년까지의 여주, 이포, 양평 수위국의 최고수위 기간을 조사하여, 최고기간인 2006년 7월 15일부터 17일에 발생한 태풍 에위니아의 첨두유량(13,022CMS)을 사용하였고, 하천단면 측량자료는 2010년에 실시한 보 공사구간 횡단면도와 준설 후 계획 횡단면도와 과거 측량자료를 이용하였고, 총 3,794개의 격자망을 평균 $200m\times80m$ 간격으로 구성하여 3차원 수리/수질 모델 프로그램인 EFDC를 사용하여 수리모델링을 실시하여 보 건설 전 후의 수위변화를 모델링 하였다. 모델링 결과 남한강 상류인 강천보 지점의 수위 저감효과가 최대 2.0m로 가장 큰 효과를 보였으며, 상대적으로 남한강의 하류인 여주보 지점은 최대 1.5m, 이포보 지점은 상대적으로 작은 1.0m 정도의 수위 저감효과를 확인할 수 있었다. 그리고 이포보 하류의 양평수위국 지점과 북한강, 남한강, 경안천이 합류되는 팔당댐 상류 지점의 경우 모델링 결과 공사 전 후 수위 차이가 없는 것으로 보아 보 건설이 남한강 하류 지점에는 큰 영향을 끼치지 않는 것으로 판단된다. 이처럼 EFDC 모형을 이용하여 정밀 수리모형 검토를 통해 수위변화를 비교해 본 결과 지점별로 약간의 차이는 발생하지만 보 건설을 통하여 수위 저감효과가 발생하는 것으로 판단된다. 보다 정확한 검토를 위해 추후에는 남한강 상류의 강천수위국 상류지점의 검토와 남한강유역의 지류 유입량을 추가하여 모델링을 실시하면 보다 더 정밀한 분석이 가능할 것이라고 판단된다.

• Journal of the Korea Society for Simulation
• /
• v.23 no.4
• /
• pp.211-218
• /
• 2014

The Test and Evaluation (T&E) system became more important due to its advancement and complexity of the weapon system. Time and cost saving T&E related studies are in progress mainly with advanced countries. By utilizing the Modeling and Simulation (M&S) technology recently, we may save time and money. Also, overcome security and safety limitations. There are many M&S based research activities in South Korea but it is way behind of the system that some countries already have developed. i.e.; United States. This area of study requires new way of developing strategies in the T&E system of Korea. This study is to design the Operational T&E system for weapon systems based on modeling of processes. And we modeled the processes of operational performance evaluation through utilizing resources and performance modules of weapon systems and combined it with the simulation engine for 3D visualization. Through this, we propose the Operational T&E system for weapon systems based on modeling of processes that represent operational performances visually.