• KCID journal
• /
• v.17 no.2
• /
• pp.57-70
• /
• 2010

This study was performed to analyze the affect of water supply capacity followed by allocating flood control volume in heightening reservoir, of which Baekgog reservoir was selected as a case study in here. Baekgog reservoir is located in Jincheon county, Chungbuk province, of which full water level will be heightened from EL. 100. 1m to EL. 102.1m, and total storage from 21.75M $m^3$ to 26.67M $m^3$. Flood inflow with 200year frequency was estimated to 997 $m^3$/s in peak flow and 22.54M $m^3$ in total volume. Reservoir flood routing was conducted to determine flood limited water levels, which was determined to have scenarios such as EL 97-98-99m in periods of 6.21.-7.20., 7.21.-8.20., and 8.21.-9.20., respectively, EL 97-97-97m, EL 98-98-98m in present reservoir, and EL 99-100-101m, EL 99-99-99m, and EL 100-100-100m in heightened reservoir. Reservoir inflow was simulated by DAWAST model. Annual paddy irrigation requirement was estimated to 33.19M $m^3$ to 2,975ha. Instream flow was allocated to 0.14mm/d from October to April. Operation rule curve was drawn using inflow, irrigation and instream flow requirements data. In case of withdrawal limit reservoir operation using operation rule curve, reduction rates of annual irrigation supply before and after flood control by reservoir were 2.0~4.3% in present size and 1.5~3.6% in heightened size. Reliability on water supply was decreased from 77.3% to 63.6~68.2% in present size and from 81.6% to 72.7~79.5% in heightened size. And reduction rates of water storage at the end of year before and after flood control by reservoir were 7.3~16.5% in present size and 7.7~16.9% in heightened size. But water supplies were done without any water deficiency through withdrawal limit reservoir operation in spite of low flood regulating water level.

• Journal of Environmental Science International
• /
• v.12 no.4
• /
• pp.439-446
• /
• 2003

In this paper, the study area is selected Sungju Reservoir which was constructed with an agricultural purpose and determined the optimal water management plan among the five cases of classified irrigation area by using Linear Programming. As a results of reservoir operation, the additional water quantity of classified irrigation area showed 16.036${\times}$10$\^$6/m$^3$3/year, 19.404${\times}$10$\^$6/m$^3$/year, 18.864${\times}$100$\^$6/m$^3$/year, 4.032${\times}$10$\^$6/m$^3$/year and 0.672${\times}$10$\^$6/m$^3$/year and the total water supply quantity showed 69.628${\times}$10$\^$6/m$^3$/year, 70.048${\times}$10$\^$6/m$^3$/year, 67.979${\times}$10$\^$ 6/m$^3$/year, 67.979${\times}$10$\^$6/m$^3$/year, and 69.939${\times}$10$\^$6/m$^3$/year respectively. Therefore, the case-II was adopted with water management plan of optimum. It is also known that the maximum irrigation area augmentation effect appears in the case which will use the additional water quantity in field irrigation of the case-II which was adopted.

• Korean Journal of Microbiology
• /
• v.21 no.3
• /
• pp.135-142
• /
• 1983

The presence of polyphosphate phosphohydrolase (PPPH) and tripolyphosphate phosphohydrolase (TPPH) in Chlorella ellipsoidea were confirmed from the cell-free extract of the algal cells and three forms of PPPH were isolated, purified, and measured Km-Vmax value and inhibitory effect by metal ions, respectively. PPPH was most active at pH7.2, whereas TPPH at pH 7.6. Both enzymes exhibited their maximum activity at $37^{\circ}C$. For the manifestation of catalytic activity, divalent, divalent metal ions are needed, and the best activator for both enzymes was $Co^{++}\;ions\;(10^{-3}M)$. These enzymes were inhibited by $Hg^{++}\;ions\;(10^{-3}M)$ considerably. PPPH from Chlorella ellipsoidea was purified by ammonium sulfate fractionation, ion-exchange chromatography on DEAE-Sephadex A-25, and gel filtration on Sephadex G-100, and some properties of the three different fraction with PPPH activity $(PPPH_1,\;PPPH_2,\;and\;PPPH_3)$ were found, i.e, PPPH has multiple form. The Km values of $PPPH_1,\;PPPH_2,\;and\;PPPH_3$ obstained were $6.25{\times}10^{-4}M,\;10^{-4}M-4/M,\;and\;3.33{times}10^{-4}M$ and Vmax were 3.33 mM/min, 3.33 mM/min, and 2.67 mM/min, respectively. It was shown that the types of inhibition of $Hg^{++} on the activities of three forms of PPPH were competitive inhibition.

• Journal of Korean Society of Forest Science
• /
• v.105 no.4
• /
• pp.441-448
• /
• 2016

The purpose of this study was to broaden our knowledge on the productivity and costs of felling operation in three different harvesting methods(whole tree, tree-length and cut-to-length). Felling was conducted in three different harvesting methods with two workers who have different work experiences. Worker A and B have had felling experiences for about 5 years and 15 years, respectively. Felling productivity in whole tree method was $10.3m^3/SMH$ for worker A and $12.7m^3/SMH$ for worker B. Felling costs for worker A and B were $2,066won/m^3$ and $2,201won/m^3$, respectively. Although felling productivity of worker B in whole tree method was higher than worker A, felling costs of worker A were similar to worker B because the wage of worker B was more expensive than the wage of worker A (p>0.05). In tree-length method, felling cost of worker B were cheaper than that of worker A. Felling productivity and cost in tree-length method were $2.2m^3/SMH$ and $9,890won/m^3$ for worker A and $3.3m^3/SMH$ and $8,459won/m^3$ for worker B, respectively (p<0.05). In cut-to-length method, felling productivity and cost were $2.3m^3/SMH$ and $9,584won/m^3$ for worker A and $3.0m^3/SMH$ and $9,395won/m^3$ for worker B, respectively. Felling productivity of worker B was higher than that of worker A(p>0.05). Our preliminary results found that harvesting methods and worker's experiences highly affect on the productivity and costs of felling operations. These results should be useful for forest managers when planning cost-effective harvesting operations.

• Journal of Environmental Health Sciences
• /
• v.33 no.6
• /
• pp.506-512
• /
• 2007

This study was conducted to describe the exposure levels of welding fumes by the type of manufacturers, work process, welding type and the size of manufacturers, and to find out the trend of chronological changes of airborne welding fume levels. The subjects of this study were 509 manufacturers, consisting of 11 types of manufacturers, 3 work processes, 7 welding types, in Busan from January, 1997 to December, 2005. Airborne concentration of welding fume was determined by manual of National Institute for Occupational Safety and Health (NIOSH), and the data were analyzed by using SPSS 10.0 for Windows program. The mean concentration of airborne welding fume in all manufacturers was $1.29\;mg/m^3$ (Range: $0.01{\sim}3.00\;mg/m^3)$. The level of welding fume was the highest, as $1.96\;mg/m^3$, for manufactures of motor vehicles, trailers and semi-trailers, which was lower than $5.0\;mg/m^3$ of 8 hr-TWA in Korean permissible exposure limit for welding fume. There was a significant difference in the mean levels of welding fumes by work process, showing the highest in welding workshop ($1.39\;mg/m^3$), followed by pipeline welding workshop ($1.26\;mg/m^3$) and engineering workshop ($1.20\;mg/m^3$). Among welding types, the mean level of welding fume was the highest in the type of $CO_2$ & arc welding, as $1.46\;mg/m^3$, followed by $CO_2$ welding ($1.40\;mg/m^3$), shielded metal arc welding ($1.31\;mg/m^3$), spot welding ($1.27\;mg/m^3$), and so on. The highest mean level of welding fume was $1.58\;mg/m^3$ in work process of pipe line welding workshop for the manufacturers of basic iron and steel, and $2.27\;mg/m^3$ in the type of arc welding for the manufactures building ship and boats. By the size of manufacturers, the mean concentration of welding fume for manufactures in small scale with less than 50 workers was the highest as $1.45\;mg/m^3$ (Range: $0.07{\sim}3.00\;mg/m^3)$. The mean level of welding fume was the highest as $1.39\;mg/m^3$ both in 1997 and in 2005, showing a trend of fluctuating periodically within a range of $1.10{\sim}1.39\;mg/m^3$. The above results suggested that more effective control program for work environment producing welding fumes should be developed and applied since there were significant variations in welding fume levels by the type of manufacturers, work processes, welding types, the size of manufactures, and by year.

• Korean Journal of Materials Research
• /
• v.10 no.7
• /
• pp.489-492
• /
• 2000

Three different white cast irons alloyed with Cr and Si were prepared in order to study their distribution be-havior in matrices and carbides. The specimens were produced using a 15kg-capacity high frequency induction fur-nace. Melts were super-heated to $1600^{\circ}C$, and poured at $1550^{\circ}C$ into a pepset mold. Three combinations of the alloys were selected so as to observe the distribution behavior of Cr and Si : 0.5%C-25.0%Cr-1.0%Si(alloy No. 1), 0.5%C-5.0%Cr-1.0%Si(alloy No. 2) and 2.0%C-5.0%Cr-1.0%Si(alloy No. 3). Cellular $M_7C_3$ carbides-$\delta$ferrite eutectic were developed at $\delta$ferrite liquid interfaces in the alloy No. 1 while only traces of $M_7C_3$ carbides-$\delta$ferrite eutectic were precipitated in the alloy No. 2. With the addition of 2.0% C and 5.0% Cr, ledeburitic $M_3C$ carbides instead of cellular $M_7C_3$ carbides were precipitated in the alloy No. 3. Cr was distributed preferentially to the $M_7C_3$ carbides rather than to the matrix structure while more Si was partitioned in the matrix structure rather than the $M_7C_3$ carbides. $K^m$ for Cr was ranged from 0.56 to 0.68 while that for Si was from 1.12 to 1.28. $K^m$ for Cr had a lower value with increased carbon contents. The mass percent of Cr was higher in the $M_7C_3$ carbides with increased Cr contents.

• Journal of Korean Society for Atmospheric Environment
• /
• v.9 no.1
• /
• pp.81-92
• /
• 1993

A purpose of this study was carried out to investigate the concentrations of four elements of PAHs(Polycyclic Aromatic Hydrocarbons) in suspended particulate matters of underground shopping stores in Seoul city. The particulate matters were collected at five underground shopping stores(Yongdungpo, Myongdong, Ulchiro, Express Terminal, Chamshil) in the Seoul area during February-October, 1992. Samples were collected using cascade impactor of low volumn air sampler and were analysed using High Performance Liquid Chromatography(HPLC) with fluorescence detector. Calibration on HPLC analyse is nearly accord with retention time between the standard solution and the samples. Analysed results obtained favorable analysing recovery rate of 97.3% and coefficient of variation of 1.60%. Mean concentrations of suspended particulate matters in five underground shopping stores wre 216.3 g/$m^3$ and observed higher at fine particles(117.2 g/$m^3$) which is respirable particulates than coarse particles(99.2 g/$m^3$). Concentrations of four species PAH were determined with anthracene of 16.8ng/$m^3$, fluoranthene of 72.3ng/$m^3$, benzo(a)pyrene of 0.54ng/$m^3$, and benzo(k)fluoranthene of 0.29ng/$m^3$, respectively. Fluoranthene levels were significantly higher than those levels in other components. PAHs concen-tration at shopping areas showed 21.3ng/$m^3$ in Yongdungpo, 35.1ng/$m^3$ in Myongdong, 23.4ng/$m^3$ in Ulchiro, 11.1ng/$m^3$ in Express Terminal, and 21.4ng/$m^3$ in Chamshil, respectively. Particularly, benzo(a)pyrene and benzo(k)-fluoranthene were detected over 83 percentage in fine particles, while fluoranthene wre highly detected in coarse particles. Also, higher concentrations of benzo(a)pyrene, benzo(k)fluoranthene were found in winter while levels of anthracene and fluoranthene were found higher in summer than other seasons.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.1
• /
• pp.80-86
• /
• 2013

The 3-Dimensional(3D) localization system based on beacon expansion and coordinate-space disassembly for the design of the 3D localization system in indoor environment is proposed and the performance of the proposed system is analyzed in this paper. The localization ratio of the 3D localization system adapts the proposed algorithm is analyzed by the calculation of errors occurred in the coordinates that the mobile node locates. It is indicated that the average error distance of the 3D localization system adapts the proposed algorithm is less than that of the 3D localization system not adapts the proposed algorithm as 0.47m. The localization average distance error in 12 coordinates is indicated that the 1.5m case is less than 2.5m case as 0.38m by some experimentations under the condition that the distances between the ceiling and the mobile node are 1.5m and 2.5m measured from the ceiling respectively. It is seen that the 3D localization system based on beacon expansion and coordinate-space disassembly can improved the degradation of the quality of service that is caused by some conditions and performance differences in sensors.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.632-632
• /
• 2015

기후변화로 정상적인 물 순환 체계가 변화되면서, 건천화로 하천의 정상정인 기능이 어렵게 될 것이다. 농업용 저수지의 둑 높이기 사업으로 수자원의 저류공간이 증가되었고, 확보된 수자원을 기후변화에 대응해 하천유지유량으로 활용 할 수 있게 되었다. 본 연구에서는 기후변화 시나리오 RCP 8.5를 기반으로 임고 저수지의 둑 높이기 사업 전과 후의 공급 가능한 하천유지유량을 평가하였다. 하천유지유량의 공급은 일별 일정량을 공급하도록 하여 이수안전도 90%를 만족하도록 설정하였고, 상시공급과 갈수시 공급으로 구분하여 분석한 결과는 다음과 같다. 첫째, 둑 높이기 사업 전에 하천유지유량의 공급 없이 용수공급 능력을 분석한 결과, 2025s기간, 2055s기간, 2085s기간의 이수안전도는 각각 100%, 93.3%, 96.7%로 분석되어 농업용수의 공급 능력은 충분한 것으로 분석되었다. 둘째, 미래 2025s기간, 2055s기간, 2085s기간에 대하여 둑 높이기 사업 전, 농업용수 공급과 함께 하천유지유량을 상시 공급하였을 경우에는 각각 일별로 3.7천$m^3$, 1천$m^3$, 1.2천$m^3$ 공급 가능하였고, 갈수시만 공급 하였을 경우에는 각각 일별로 7천$m^3$, 2.2천$m^3$, 3.5천$m^3$ 공급 가능한 것으로 분석되었다. 셋째, 미래 2025s기간, 2055s기간, 2085s기간에 대하여 둑 높이기 사업 후, 농업용수 공급과 함께 하천유지유량을 상시 공급하였을 경우에는 각각 일별로 10.5천$m^3$, 4.5천$m^3$, 7천$m^3$ 공급 가능하였고, 갈수시만 공급 하였을 경우에는 각각 일별로 16.6천$m^3$, 7천$m^3$, 12.2천$m^3$ 공급 가능한 것으로 분석되었다. 결론하여 농업용수 공급능력이 충분한 임고 저수지는 둑높이기 사업 후 확보된 수자원을 하천 유지유량으로 공급하면, 증고사업 전보다 상시공급일 경우에 2.8-5.8배, 갈수시 공급일 경우에 2.4-3.4배 많은 양을 공급 할 수 있는 것으로 나타났다.

• Journal of Radiation Protection and Research
• /
• v.22 no.2
• /
• pp.97-101
• /
• 1997

During the period of March 1995 to December 1995, tritium concentrations of tritiated water vapor (HTO) and tritiated hydrogen (HT) in the atmosphere in Taejon were measured to evaluate present background levels of tritium in the atmosphere. Air samples were collected continuously for three weeks with a sampling system for tritium in the atmosphere and were analyzed by a liquid scintillation counting system. The range of the atmospheric HTO concentrations was 3.2-36 mBq $m^{-3}$ with a mean value of 16.2 mBq $m^{-3}$. The atmospheric HTO concentrations were the highest in summer and the lowest in winter. This trend was similar to the variation of atmospheric absolute humidity. The specific activities of tritium in atmospheric water vapor in Taejon ranged from 0.62 Bq $L^{-1}$ to 3.82 Bq $L^{-1}$ with a mean value of 2.04 Bq $L^{-1}$. The atmospheric HT concentrations were in the range of 35.7 mBq $m^{-3}$ to 48.9 mBq $m^{-3}$ with a mean value of 41.1 mBq $m^{-3}$.