• 한국물환경학회지
• /
• 제22권1호
• /
• pp.74-82
• /
• 2006

In this study, development of M2-Dephanox and M3-Dephanox process has been tried to enhance the nitrogen removal of M-Dephanox process on the basis of previous study about M-Dephanox. The results showed that T-N removal efficiency of M3-Dephanox process was 8.9% or 11.3% higher than M-Dephanox or M2-Dephanox processes, respectively. This result is due to the lower $NO_3{^-}-N$ concentration in the effluent of M3-Dephanox than of M-Dephanox and M2-Dephanox processes. This results were recurrenced by PASS simulator. As result of simulation by PASS program, effluent $NO_3{^-}-N$ concentration of M3-Dephanox process was 1.4 mg/L and 3.6 mg/L lower than M-Dephanox and M2-Dephanox processes. In the study about optimization of M3-Dephanox processes by PASS program, SRT greatly affected T-N removal of M3-Dephanox process, whereas, the recycle rate and recirculation rate did little affect T-N removal efficiency of M3-Dephanox. In the study about optimization of reactors following the nitrification reactor of M3-Dephanox process, it was shown that the best optimum volume ratio of denitrification reactor, intermittently aerated reactor and anoxic reactor for the T-N removal were 29.1(%) : 32.7(%) : 38.2(%). T-N removal efficiency at this volume ratio was similar to T-N removal efficiency at the volume ratio of 36.3(%) : 36.3(%) : 27.4(%) designed for the lab-scale M3-Dephanox.

• 대한환경공학회지
• /
• 제27권2호
• /
• pp.206-214
• /
• 2005

본 연구는 도시하수 처리시 부유성장 미생물만을 이용하는 표준 활성슬러지 공정(Conventional Activated Sludge; CAS) 및 MLE(Modified Ludzack-Ettinger) 공정과 부유 및 부착 미생물을 동시에 활용하는 하이브리드(hybrid)형 공정인 M-Dephanox(Modified-Dephanox) 공정의 유기물, 질소 및 인 제거효율을 상호 비교 검토하고자 하였다. M-Dephanox 공정은 기존 Dephanox 공정의 단점을 극복하기 위하여 고안된 공정으로서 기존 Dephanox 공정에 비해 탈질 효율을 증가시킬 수 있다. 연구 결과 부유 성장 미생물을 이용하는 MLE 공정에 비해 하이브리드형 공정인 M-Dephanox 공정의 TCOD, T-N 및 T-P 제거효율이 각각 12.3, 18.6, 28.2% 더 높게 관찰 되었다. M-Dephanox 공정이 MLE 공정에 비해 유기물 및 질소 제거 효율이 더 높은 원인은 M-Dephanox 공정이 하이브리드 공정이자 다단 슬러지 공정(multi-sludge)인 동시에 생흡착(biosorption)을 이용한 효과적인 유기물 이용 기작이 있기 때문이다. M-Dephanox 공정의 질산화 반응조에서의 암모니아성 질소 제거효율은 약 2hr의 수리학적 체류시간에서 약 96.7%로 나타나 Dephanox 공정과 관련한 기존 문헌에서 보고된 5 hr의 체류시간 보다 3 hr 짧은 수리학적 체류시간에서도 높은 암모니아성 질소 제거효율을 관찰 할 수 있어 전체 공정의 수리학적 체류시간을 줄이는데 커다란 역할을 할 것으로 기대된다.

• 한국물환경학회지
• /
• 제20권1호
• /
• pp.24-31
• /
• 2004

This study was initiated to evaluate the efficiencies of DEPHANOX and Modified-DEPHANOX, which were devoloped to enhance nitrogen removal efficiency in municipal wastewater treatment. In the results, removal efficiency of organic matters was not affected much by increased loading rate of organic matters which is contained in influent. The nitrogen removal efficiencies according to the loading rate of influent TN was decreased drastically in conditions of over $0.2kg/m^3{\cdot}day$, which is T-N loading rate, and the DEPHANOX process was affected more sensitively than the M-DEPHANOX was. When the temperature was altered from $25^{\circ}C$ to $16^{\circ}C$ at HRT 6hrs, the removal efficiency of ammonia nitrogen was still over 90% and it was concluded that both DEPHANOX and M-DEPHANOX were strong enough to endure temperature variation. Moreover, both processes showed over 90% in ammonia removal efficiencies in over HRT 5hrs, so it was concluded that they were strong in HRT variation. M-DEPHANOX process showed a higher value than DEPHANOX did in T-N removal efficiency to the extent of 4~21 %, which resulted from differency of denitrification rates and the biosorption efficiency of organic matter in both processes. In the condition of HRT less than 4hrs, concentrations of ammonia nitrogen contained in effluents and nitrification reactors, might be sensitively affected by biosorption efficiency of organic matters in first separation tank. In the effect of effluent nitrate concentration in phosphorus removal, the more effluent nitrate concentration was decreased, the more phosphorus removal efficiency was increased. This result is related to the decrease of concentration of effluent nitrate which resulted from nitrification inhibition by decreased HRT.

• 환경위생공학
• /
• 제24권3호
• /
• pp.7-15
• /
• 2009

본 연구에서는 DEPHANOX공정을 변형한 두 개의 질산화 반응조를 둔 M-DEPHANOX 공정과 기존 변형된 질산화 반응조를 RBC로 대체한 형태로 단일 질산화 반응조로 운전된 M-DEPHANOX 공정을 운전하였다. 그리고 두 공정의 제거율을 비교하기 위하여 질소, 인 및 유기물 제거율과 질산화 반응조의 유기물 부하에 따른 $NH_3$-N 제거율을 조사하였다. 연구결과 $NH_3$-N 제거율은 M-DEPHANOX공정이 91.8%, M-eBNR 공정은 96.9%로서 두 공정 모두 높게 나타났다. TCOD와 SCOD 제거율은 M-DEPHANOX공정은 84.1와 78.2%, M-eBNR공정은 83.4%와 75.6%이었다. 또한 유기물이 $NH_3$-N 제거율에 미치는 영향은 M-eBNR 공정의 질산화 반응조에서는 1차 침전조에서 거의 나타나지 않았다. M-eBNR 공정의 $NH_3$-N 제거율은 도시하수의 유입성상이 달라지더라도 안정적으로 유지되었다.