• 천문학논총
• /
• 제30권2호
• /
• pp.65-67
• /
• 2015

The surfaces of most atmosphereless solar system objects are referred to as regolith, layers of loosely connected fragmentary debris, produced by meteorite impacts. Measurements of light scattered from such surfaces provides information about the composition and structure of the surface. A suitable way to characterize the scattering properties is to consider how the intensity and polarization of scattered light depends on the particle size, composition, porosity, roughness, wavelength of incident light and the geometry of observation. In the present work, the effect of porosity on bidirectional reflectance as a function of phase angle is studied for alumina powder with grain size of $0.3{\mu}m$ and olivine powder with grain size of $49{\mu}m$ at 543.5 nm. The optical constants of the alumina sample for each porosity were calculated with Maxwell Garnett effective medium theory. On using each of the optical constants of alumina sample in Mie theory with the Hapke model the variation of bidirectional reflectance is obtained as a function of phase angle with porosity as a parameter. Experimental reflectance data are in good agreement the model. For the olivine sample the effect of porosity is studied using Hapke (2008).

• Corrosion Science and Technology
• /
• 제20권3호
• /
• pp.152-157
• /
• 2021

Stainless steel is a metal that does not generate rust. Due to its excellent workability, economic feasibility, and corrosion resistance, it is used in various industrial fields such as ships, piping, nuclear power, and machinery. However, stainless steel is vulnerable to corrosion in harsh environments. To solve this problem, its corrosion resistance could be improved by electrochemically forming an anodized film on its surface. In this study, 316L stainless steel was anodized at room temperature with ethylene glycol-based 0.1 M NH₄F and 0.1M H₂O electrolyte to adjust the thickness of the oxide film using different anodic oxidation voltages (30 V, 50 V, and 70 V) with time control. The anodic oxidation experiment was performed by increasing the time from 1 hour to 7 hours at 2-hour intervals. Corrosion resistance according to the thickness of the anodic oxide film was observed. Electrochemical corrosion behavior of oxide films was investigated through polarization experiments.

• 한국재료학회지
• /
• 제23권3호
• /
• pp.206-210
• /
• 2013

In the segmented-in-series solid-oxide fuel cells (SIS-SOFCs), fabrication techniques which use decalcomania paper have many advantages, i.e., an increased active area of the electrode; better interfacial adhesion property between the anode, electrolyte and cathode; and improved layer thickness uniformity. In this work, a cell-stack was fabricated on porous ceramic flattened tube supports using decalcomania paper, which consists of an anode, electrolyte, and a cathode. The anode layer was $40{\mu}m$ thick, and was porous. The electrolyte layers exhibited a uniform thickness of about $20{\mu}m$ with a dense structure. Interfacial adhesion was improved due to the dense structure. The cathode layers was $30{\mu}m$ thick with porous structure, good adhesion to the electrolyte. The ohmic resistance levels at 800, 750 and $700^{\circ}C$ were measured, showing values of 1.49, 1.58 and $1.65{\Omega}{\cdot}cm^2$, respectively. The polarization resistances at 800, 750 and $700^{\circ}C$ were measured to be 1.63, 2.61 and $4.17cm^2$, respectively. These lower resistance values originated from the excellent interfacial adhesion between the anode, electrolyte and cathode. In a two-cell-stack SOFC, open-circuit voltages(OCVs) of 1.915, 1.942 and 1.957 V and maximum power densities(MPD) of 289.9, 276.1 and $220.4mW/cm^2$ were measured at 800, 750 and $700^{\circ}C$, respectively. The proposed fabrication technique using decalcomania paper was shown to be feasible for the easy fabrication of segmented-in-series flattened tube SOFCs.

• 대한전자공학회논문지TC
• /
• 제45권8호
• /
• pp.121-127
• /
• 2008

본 논문은 원통형 확산기를 사용한 전자파 잔향실내의 전기장 분포에 관하여 다루었다. $1{\sim}3$ GHz 주파수 대역의 QRD(Quadratic Residue Diffuser)와 원통형 확산기(Cylindrical Diffuser)를 설계 후 각각의 전기장 분포 특성을 비교하였다. 전기장 분포 특성 및 전기장 균일도를 조사하기 위해 FDTD(Finite-Difference Time-Domain) 수치 해석 방법을 사용하였으며, 2 GHz에서 수치해석 결과 원통형 확산기를 사용하였을 경우 기존의 QRD를 사용한 경우에 비하여 표준편차와 공차는 각각 0.11 dB, 0.43 dB 개선되었고, 전기장 세기는 QRD의 36.6 dBmV/m보다 높은 43.2 dBmV/m로 나타났으며, 편파 특성면에서도 QRD보다 개선되었음을 확인 할 수 있었다. 따라서 원통형 확산기를 사용한 전자파 잔향실이 소형 전자기기의 전자파 장해 및 복사 내성 측정을 위한 대용시험 시설로 사용될 수 있음을 확인하였다.

• 폴리머
• /
• 제36권6호
• /
• pp.822-830
• /
• 2012

본 연구에서는 실리카 나노입자를 우수한 내가수분해성을 가지는 dipodal 형태의 bis[3-(trimethoxysilyl)propyl]amine(BTMA) 실란 커플링제로 표면 개질한 후, 실리카에 도입된 BTMA의 2차 아미노기인 N-H기와 마이클 부가반응이 가능한 acrylate기를 1분자당 2개씩 가지는 poly(ethylene glycol)diacrylate(PEGDA)로 표면 처리하여 acrylate기를 실리카 입자 표면에 도입하는 연구를 수행하였다. PEGDA의 몰수 및 3가지 서로 다른 분자량의 PEGDA(M.W. 258, 575, 700) 처리가 실리카 표면에 도입되는 acrylate기의 구조에 미치는 영향을 fourier transform infrared spectroscopy(FTIR), elemental analysis(EA, 원소분석) 및 고체 상태 $^{13}C$ cross-polarization magic angle spinning(CP/MAS) nuclear magnetic resonance spectroscopy(NMR)법을 사용하여 분석하였다. 액체상태의 순수 PEGDA와 순수 BTMA를 같은 몰 비로 반응시키면 PEGDA 1분자당 2개씩 존재하는 acrylate기 중 1개 acrylate기는 순수 BTMA의 N-H기와 1:1의 비율로 마이클 부가반응이 일어나 ${\beta}$-amino acid ester를 형성하고, 나머지 1개의 acrylate기는 남아서 중합반응이 가능한 단량체 합성이 가능하다. 하지만, BTMA로 개질된 실리카 입자를 PEGDA와 반응시키면, PEGDA 1분자당 2개씩 결합있는 acrylate기 대부분이 실리카 입자에 결합되어 있는 BTMA의 N-H기와 마이클 부가반응으로 ${\beta}$-amino acid ester를 형성하여, acrylate기의 C=C기 대부분이 C-C로 변화함을 확인하였다.

• 전기화학회지
• /
• 제10권4호
• /
• pp.301-305
• /
• 2007

연료전지 운전 중에 스택(stack) 분리판 접착부위나 다른 경로로 부동액이 누설될 경우에는 화학적 반응에 영향을 주어 성능의 저하가 발생할 수 있다. 본 연구에서는 부동액이 누설되었을 경우의 성능 거동을 관찰하는 실험을 수행하였다. $400mA/cm^2$ 전류밀도 조건에서 마이크로 펌프를 이용하여 부동액을 주입하였으며 상대습도 100%/100%와 수소와 공기의 양론비는 1.5/2.0으로 고정하여 실험을 수행하였다. 3 cell stack을 이용하여 부동액을 주입한 후 정전류 회복 실험을 수행한 결과 cathode측에 부동액을 주입하였을 경우에는 성능이 회복되었고 anode측에 부동액을 주입하였을 경우에는 성능이 회복되기 어려운 것으로 나타났다. Anode측이 회복되지 못하는 이유로는 ethylene glycol의 산화반응에서 발생하는 불순물에 의한 피독 현상과 GDL과 3상 계면에 ethylene glycol이 물리적으로 흡착하였을 경우 반응에 필요한 연료 공급의 방해로 인한 성능 저하를 예상할 수 있다. 성능 저하에 영향을 주는 두 가지 변수를 확인하는 실험을 수행하였다. 회복 실험은 anode측에 water pump를 이용하여 질소 기체와 물을 동시에 공급하는 방법으로 실험을 수행하였고, 1시간 간격으로 성능 회복 유무를 확인하였다. 성능 평가는 polarization curve, cyclic voltammetry(CV), electrochemical impedance spectroscopy(EIS)를 사용하였으며, 정량분석은 gas chromatography를 이용하여 분석하였다. 부동액 주입 후 성능은 크게 저하되었고 정전류 회복 실험에서도 성능 회복은 미미하게 나타났다. 이 후 물 주입회복 실험을 수행하였고 회복 실험을 수행한 2시간 이후에는 93% 이상의 회복을 관찰할 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제16권1호
• /
• pp.6-15
• /
• 1991

The purpose of this study was to observe in vitro chloride corrosion behavior from 5 kinds of amalgam (Caulk spheracal, Amalcap, Dispersalloy, Tytin, Sybralloy) as a function of time after tritruration by using potentiostat. After each amalgam alloy and Hg was triturated as the direction of the manufacturer by the mechanical amalgamator, the triturated mass was inserted the cyrindrical matal mold ($12{\times}10mm$) and was condensed by using routine manner. The specimen was removed from the mold and was stored at room temperature for 1 week, 1 month and 3 months, and standard surface preparation was routine carried out. The 0.9% saline solution was used as electrolyte in pH 6.8~7.0 at $30{\pm}0.5.^{\circ}C$. The open circuit potential was determined after 30 minutes' immersion of 1 week, 1 month and 3 month old specimens. The scan rate was 1 mV/sec and the surface area of amalgam exposed to the solution was $0.65\;Cm^2$ for each specimen. All potentials reported are with respect to a silver / silver chloride electrode (SSE). The following result was obtained. 1. All amalgam specimens became more noble corrosion potentials which represent the improved corrosion resistance as the time elapsed. 2. Three kinds of high copper amalgam always exhibited more noble potential than low copper amalgam at 1 week, 1 month and 3 months. 3. Two kinds of low copper amalgam had the similar polarization curve pattern with 3 current peaks at each time period and current densities associated with these peaks were decreased as aging especially in caulk spherical amalgam. 4. All kinds of high copper amalgam had the similar polarization curve pattern with absence of prominent current peak at each time period, but the polarization curve of D amalgam had one apparent current peak at 1 week.

• 한국정보통신학회논문지
• /
• 제11권7호
• /
• pp.1359-1366
• /
• 2007

최근 광통신 용량은 VoIP, AUdio/Video 스트리밍의 멀티미디어 서비스 수요로 인한 정보통신 용량의 증가에 비례하여 증가하고 있다. 초고속 광통신망에서 추가적인 광섬유망과 고속장비 없이 이를 해결하기 위한 방법으로 DWDM(Dense Wavelength Division Multiplexing) 기법이 대두되고 있다. 따라서, 본 논문에서는 이러한 기능을 갖는 광필터를 설계하기 위하여 광섬유 한쪽의 클래드를 연마하여 다층 슬래브 도파로에 결합시킨 형태의 광섬유/다층 슬래브 결합구조의 광필터를 제안하였다. 제안된 광필터는 $1.5{\mu}m$ 통신창에서 분리간격이 $4.15{\mu}m$일 때 65nm의 편광 독립성, TM 모드와 TE 모드에 대해 중심파장이 각각 ${\lambda}_0=1.54946\;{\mu}m$와 ${\lambda}_0=1.6144\;{\mu}m$일 때 0.1 nm의 FWHM(Full Width at Half Maximun) 특성을 가진다.

• Transactions on Electrical and Electronic Materials
• /
• 제6권3호
• /
• pp.119-123
• /
• 2005

$0.10Pb(Sb_{1/2}Sn_{1/2})O_3-0.25PbTiO_3-0.65PbZrO_3$ specimens doped with $ MnO_2\;(0.18\;mol\%)$ and $Y_2O_3\;(0\~0.4\;wt\%)$ were fabricated by the mixed-oxide method. All specimens showed the typical XRD patterns of a perovskite polycrystalline structure and the lattice constant decreased with increasing amount of $Y_2O_3$. The relative dielectric constant and the dielectric loss of the specimens doped with $0.2\;wt\%\;Y_2O_3$ were 704 and 0.0201, respectively. The remanent polarization, the coercive field and the pyroelectric coefficient of the specimen doped with $0.2\;wt\%\;Y_2O_3$ were $10.88\times10^{-2}Cm^{-2},\;11.12\times10^2kVm^{-1}$ and $5.03\times10^{-4}Cm^{-2}K^{-1}$ at $25^{\circ}C$, respectively. The figures of merit, $F_V$ for the voltage responsivity and $F_D$ for the specific detectivity, of the specimen doped with $0.2\;wt\%\;Y_2O_3$ were the good values of $3.04\times10^{-2}\;m^2C^{-1}\;and\;1.50\times10^{-5}\;Pa^{-1/2}$, respectively.

• 한국전기전자재료학회논문지
• /
• 제19권12호
• /
• pp.1092-1098
• /
• 2006

The influence of the concentration of precursor solution and the number of solution coatings on the densification of the $Pb(Zr_xTi_{1-x})O_3$ (PZT) thick films was studied. PZT powder and PZT precursor solution were prepared by3 sol-gel method and PZT thick films were fabricated by the screen-printing method on the alumina substrates. The composition of powder and precursor solution were PZT(70/30) and PZT(30/70), respectively. The PZT precursor solution was spin-coated on the PZT thick films. A concentration of a coating solution was 0.5 to 2.0 mol/L[M] and the number of coating was repeated from 0 to 6. The XRD patterns of all PZT thick films shelved typical perovskite polycrystalline structure. The porosity of the thick films was decreased with increasing the number of coatings and 6-time coated films with 1.5 M showed the dense microstructure and thickness of about $60{\mu}m$. The relative dielectric constant of the PZT thick film was increased with increasing the number of solution coatings and the thick films with 1.5 M, 6-time coated showed the 698. The remanent polarization the 1.5 M and 6-time coated PZT thick films was $38.3{\mu}C/cm^2$.