• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.58-62
• /
• 2000

The fabrication process and analysis of thermal properties of 50~76vo1% SiCp/Al metal matrix composites(MMCs) for heatsink materials in electronic packaging were investigated. The 50~76vo1% SiCp/Al MMCs fabricated by pressure infiltration casting process showed that thermal conductivities were 85~170W/mK and coefficient of thermal expansion(CTE) were ranged 10~6ppm1k. Specially, the thermal conductivity and CTE of 71vo1%SiCp/Al MMCs were ranged 115~156W/mK and 6~7ppm/K. respectively, which showed a improved thermal properties than the conventional electronic packaging materials such as ceramics and metals.

• 산업식품공학
• /
• 제14권2호
• /
• pp.118-126
• /
• 2010

The fibrous material fraction as a by-product from the commercial aloe vera gel processing was obtained and freeze dried. The physicochemical characteristics such as the proximate composition, crystalline/surface structures and several physical functionalities including the water holding capacity (WHC), swelling capacity (SW), oil holding capacity (OHC), emulsion/foam properties and viscosity properties of this powdered sample (100 mesh) were investigated and analyzed by comparison with commercial $\alpha$-cellulose as a reference sample. The total dietary fiber content of powdered sample was very high as much as 87.5%, and the insoluble dietary and soluble dietary fiber content ratios were 77.6 and 22.4%, respectively. The FT-IR spectrum of powdered sample showed a typical polysaccharide property and exhibited a x-ray diffraction pattern for cellulose III and IV like structure. SW (8.24${\pm}$0.15 mL/g), WHC(6.40${\pm}$0.19 g water/g solid) and OHC(10.32${\pm}$0.29 g oil/g solid) of freeze dried aloe cellulose were about 3.3, 1.4 and 2 times higher than those of commercial $\alpha$-cellulose, respectively. Aloe cellulose (~2%, w/v) alone had no foam capacity while improved the foam stability of protein solution (1% albumin+0.5% $CaCl_{2}$) by factor of 300%. Emulsion capacity of 2%(w/v) aloe cellulose was about 70% level of 0.5%(w/v) xanthan gum, but its emulsion stability was about 1.2 times higher than that of xanthan gum. Also, aloe cellulose containing CMC (carboxyl methyl cellulose) of 0.3%(w/v) showed a very good dispersity. Aloe cellulose dispersion of above 1%(w/v) exhibited higher pseudoplasticity and concentration dependence than those of $\alpha$-cellulose dispersion, indicating the viscosity properties for new potential usage such as an excellent thickening agent.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권3호
• /
• pp.351-357
• /
• 2001

The rapid formation of a cream line cannot be observed in raw goat's milk standing at a low temperature. Although the poor creaming ability of goat's milk has been considered to be due to the small size of milk fat globules and the lack of euglobulin capable of being adsorbed on milk fat globules, there is much left to study. The present work attempted to elucidate a factor for poor creaming ability of goat's milk. The creaming ability of the experimental milks reconstituted from creams and skim milks separated from cow's milk or goat's milk was measured by the volume of the cream layer and the fat content of bottom layer. The polypeptides composition of the P1 the fraction (i.e., the high molecular weight fraction eluted near the void volume obtained by the gel filtration of whey) and milk fat globule membrane prepared from both milks were compared. It was found that the promotion of creaming originated from goat's skim milk was lower than that from cow's skim milk. The P1 fraction in goat's skim milk was less than that in cow's skim milk. The polypeptide (M.W. $4.3{\times}10^4$), found in the P1 fraction of cow's milk was not found in the P1 fraction of goat's milk. It is suggested that the poor creaming ability of goat milk is caused mainly by the difference from cow milk in the amount and the composition of the P1 fraction.

• 전자공학회논문지A
• /
• 제28A권1호
• /
• pp.30-39
• /
• 1991

The influence of physical parameters (Al mole fraction, thickness, doping concentration) in the window and emitter on the efficiency characteristics of heteroface p-$Al_{x}Ga_{1-x}As/p-GaAs/n-GaAs/n^{+}$-GaAs solar cell is investigated. The maximum efficiency theoretically calculated in this device is obtained when a thickness of the window is in a range of (400-1000))$\AA$and a thickness/doping concentration of the emitter is in a range of (0.5-0.8)$\mu$m/(1-7)${\times}10^{17}cm^{-3}$, respectively. Also is the efficiency improved according to the increase of Al mole fraction in the indirect gap window(0.41${\le}x{\le}1.0$). The optimum designed heteroface cell with an area of 0.165cm$^2$fabricated using MOCVD exhibits an active area conversion efficiency of 17%, having a short circuit current density of 21.2mA/cm\ulcorner an open circuit voltage of 0.94V, and a fill factor of 0.75 under ELH-100mW/cm$^2$illumination.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.632-635
• /
• 2001

Microcrystalline Si films have been deposited by using five W-wire filaments of 0.5 mm diameter for hot-wire chemical vapor deposition (HWCVD). We compared the HWCVD grown films with the film exposed to transformer couple plasma system for the modification of seed layer. W-wire filament temperature was maintained below 1600$^{\circ}C$ to avoid metal contamination by thermal evaporation at the filament. Deposition conditions were varied with H$_2$dilution ratio, with and without plasma treatment. From the Raman spectra analysis, we observed that the film crystallization was strongly influenced by the H$_2$dilution ratio and weakly depended on the distance between the wire and a substrate. We were able to achieve the crystalline volume fraction of about 70% with an SiH$_4$/H$_2$ratio of 1.3%, a wire temperature of 1514$^{\circ}C$, a substrate separation distance of 4cm, and a chamber pressure of 38 mTorr. We investigated the influence of ${\mu}$c-Si film properties by using a plasma treatment. This article also deals with the influence of the H$_2$dilution ratio in crystallization modification.

• 한국분무공학회지
• /
• 제3권4호
• /
• pp.8-15
• /
• 1998

The spray characteristics of emulsified fuel of W/O type has been experimentally investigated. The mixture of light oil and water by using ultrasonic energy adding system is used as the emulsified fuel. The SMD of sprayed droplet of emulsified fuel is measured by using the particle size analyzer. Major parameters of the present experimental study are the volume fraction of water in emulsified fuel, $0\sim30%$ by 5%, injection pressure, $10kg_f/cm^2\sim18kg_f/cm^2$ by $2kg_f/cm^2$, and the measurement distance, $10\sim100mm$, between injection nozzle tip and analyzer beam. Compared with light oil, the SMD of emulsified fuel is larger gradually by increasing the volume fraction of water in emulsified fuel, heightening injection pressure and increasing the spray distance. Also, In considering the fact that the pattern of drop size distribution of emulsified fuel is alike that of light oil, the real time spray in coincidence with making emulsified fuel by adding ultrasonic energy can stabilize spray pattern without modificating the injection system used by now.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 추계학술대회 논문집
• /
• pp.84-85
• /
• 2004

Experimental study was conducted to characterize shear-induced lateral migration of $1.0-{\mu}m-diameter$ Brownian particles flowing through a rectangular microchannel which can be used to deliver small amount of liquids, drugs, biological agents and particles in microfluidic devices. Measurements were obtained by using a mercury lamp with a light of 532-nm wavelength, an inverted epi-fluorescence microscope, and a cooled CCD camera to record particle images. Peclet number was used as a parameter to assess the lateral distribution of the particles at a fixed volume fraction of $0.1\%$. It was shown that as Pe increased, particles were moved toward the centerline of the channel, which is in good agreement with previous studies.

• 열처리공학회지
• /
• 제13권1호
• /
• pp.27-34
• /
• 2000

This present study were investigated effect of Ni contents on the microstructure and strength characteristic in 9Cr ferritic heat-resistant steel added 1.7%W in place of Mo in order to restrain laves phase formation. The result obtained from this study are as follow. Volume fraction, number of particles per unite area and particle size of carbide decreased with increase of Ni contents. Other side, carbides of $M_{23}C_6$ type was mainly precipitated in this steel, but laves phases could not precipitated in spite of increasing of aging time. With increase of tempering temperature, hardness was increased, and maximum value was showed around 873k by secondary hardening due to precipitation of $W_2C$ type carbide and then, was decreased. Tensile and yield strength due to decrease precipitation amount of carbide and number of particles per unite area was decreased, but elongation and impact value was increased. In case of aged specimen after tempering than tempered specimen, strength was higher and elongation was lower due to increasing of precipitated amount of carbide and number of particles per unite area.

• 한국식품영양학회지
• /
• 제30권1호
• /
• pp.96-104
• /
• 2017

To obtain the immunomodulating polysaccharide from chaga mushroom (Inonotus obliquus sclerotia, IO), crude polysac- charide fractions (IO-M-CP and IO-CP, respectively) prepared from hot-water extract (IO-W) of I. obliquus by EtOH precipitation after MeOH reflux or not. After IO-W was re-dissolved in water followed by EtOH addition in the case without MeOH reflux, EtOH mixture was fractionated into EtOH-soluble (IO-E) and crude polysaccharide (IO-CP). In the meanwhile, MeOH-soluble fraction (IO-M) was separated from IO-W after MeOH reflux. The residue was dissolved in water and was added by EtOH, and then EtOH mixture was also fractionation into EtOH-soluble (IO-M-E) and crude polysaccharide (IO-M-CP). As a result of the macrophage stimulating activity of these fractions, IO-CP and IO-M-CP showed significantly increased cell proliferation and cytokines production than IO-W. Particularly, IO-M-CP promotes the production of IL-12 more than IO-CP. In the splenocytes proliferating activity and intestinal immune system modulating activity through Peyer's patch, both of 2 crude polysaccharide fractions were significantly promoted in cell proliferation and cytokines production than IO-W, and IO-M-CP was more potent than IO-CP in IL-2 production from splenocytes and GM-CSF production ($10{\mu}g/mL$) in Peyer's patch cells. In addition, immunomodulating polysaccharide fractions (IO-M-CP and IO-CP) prepared from IO-W by EtOH precipitation with or without EtOH reflux showed no significant difference in the chemical composition and component sugar. These results suggested that MeOH reflux might exclude low-molecular weight materials from IO-W and consequently increase the immunomodulating activity of IO-M-CP. Therefore, it was confirmed that immunomodulation of polysaccharide prepared from hot-water extract of chaga mushroom was enhanced by fractionation including MeOH reflux and EtOH precipitation.

• 한국광학회지
• /
• 제14권1호
• /
• pp.23-32
• /
• 2003

타원법(ellipsometry)을 사용하여 광기록 매체용 Ge$_2$ Sb$_2$ Te$^{5}$ (GST) 박막의 성장과정에 따른 타원상수 Ψ와 $\Delta$를 측정하여. GST 박막의 최적성장조건을 연구하였다. 아르곤기체압력과 DC 출력 그리고 기판의 온도를 변화시키면서 GST 박막을 성장시켰다. 제작된 시료들의 분광타원 데이터를 모델링 분석하여 GST박막의 밀도분포를 구하고 한편으로는 GST 박막이 성장하는 동안 측정한 in situ 타원 성장곡선을 분석하여 박막의 밀도분포의 변화를 추적하였다. 아르곤기체압력이 7 mTorr일 때 박막의 상대적인 밀도분포가 고르게 되었고 DC출력이 증가함에 따라 그리고 기판의 온도가 증가함에 따라 GST 박막의 밀도 균일성은 크게 향상되었다. 주사형전자현미경(SEM)을 사용하여 최적 밀도 균일성을 가지는 성장조건(7 mTorr, 45 W, 15$0^{\circ}C$)에서 제작된 GST 시료가 가장 균일한 구조를 보여줌을 확인하였다. 균일한 밀도 분포를 가지는 GST 박막의 성장조건 확립을 통하여 여러번 기록/재생할 때 광기록 박막의 안정성을 유지하는데 크게 기여할 것이다.