• 미생물학회지
• /
• 제25권2호
• /
• pp.157-164
• /
• 1987

고온 혐기성 Clostridium thermocellum의 배양액으로부터 새로운 endo-$\beta$-1, 4-glucanase를 ion exchange chromatography와 gel filtration chromatongraphy를 통하여 정제하였다. 정제된 효소의 비활성은 56배 증가하였으나 수율은 0.7%로서 매우 낮았다. SDS-PAGE, 결과, 정제된 효소는 분자량이 각각 38,000과 58,000으로 된 두 개의 subunit로 구성되어 있었다. 이 효소의 반응 최적 pH는 5.0 최적온도는 $65^{\circ}C$였으며 $70^{\circ}C$까지는 열에 안정하였으나 $80^{\circ}C$에서 거의 실활되었다. 기타 여러 가지 효소학적인 성질을 조사하였으며, 분리된 효소는 결정형 섬유소에 대한 효소활성을 나타내지 않았다.

• 열처리공학회지
• /
• 제18권2호
• /
• pp.99-104
• /
• 2005

In this study, the effects of C and Si on damping capacity and mechanical properties of as-cast and as-rolled Fe-17%Mn alloys were investigated as a basic study for the purpose of the commercialization of the alloy. The $M_s$ temperature of ${\gamma}{\rightarrow}{\varepsilon}$ martensitic transformation in Fe-17%Mn alloy was decreased with increasing C and Si contents, resulting in the less volume fraction of ${\varepsilon}$ martensite. The damping capacity was also decreased with increasing alloying content because of less ${\varepsilon}$ amount and the reduction in mobility of the damping sources such as the stacking fault boundaries and ${\gamma}/{\varepsilon}$ interfaces due to the pinning effect by alloying elements. The mechanical properties of as-rolled alloys were superior to those of as-cast alloys probably because of finer ${\gamma}$ grains, larger amount of ${\varepsilon}$ martensite, and chemical homogeneity.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권3호
• /
• pp.342-347
• /
• 2003

The enzyme $20{\alpha}$-hydroxysteroid dehydrogenase ($20{\alpha}$-HSD) catabolizes progesterone to $20{\alpha}$-dihydroprogesterone ($20{\alpha}$-OHP), and is appeared in rat corpora luteal and placenta. A polled samples of 10-15 placental and ovarian tissues collected from each individual rat were subjected to measurement of $20{\alpha}$-HSD activity. A $20{\alpha}$-HSD activity in the cytosol fraction was based on the generation of NADPH. In this study, it is designed to study cytosolic $20{\alpha}$-HSD activity in rat ovarian and placenta during pregnancy, and its relationship to embryonic mortality. It was found that from days 5 to 18 of pregnancy the $20{\alpha}$-HSD activities steady by decreased but at parturition time rapidly increased in ovary. On the other hand, placental cytosolic $20{\alpha}$-HSD activities were high detected from days 8 to 10 of pregnancy, not detectable from days 11 to 20 of pregnancy, but again very high at the time of parturition. Analysis of DEAE column chromatography revealed that two different types of $20{\alpha}$-HSD (HSD-1 and HSD-2) were found with similar activity in the placental cytosol on day 10 of pregnancy. The number of fetuses on day 10 of pregnancy was 15.4 and decreased significantly to 12.9 on day 12. The results suggested that expression of $20{\alpha}$-HSD in the placental tissues seems to be related the number of fetal survived in the specific time (days 11 and 12) which spontaneous fetal loss occurs.

• 열처리공학회지
• /
• 제11권4호
• /
• pp.295-304
• /
• 1998

The effects of retained austenite and carbon content in the retained austenite on the tensile strength-elongation balance and spot weldability of TRIP high strength steel sheet have been investigated. The retained austenite of granular type increased with increasing intercritical annealing and austempering temperature, and film type was increased with the increase of austempering time. The volume fraction of retained austenite increased with decreasing intereritical annealing temperature, and the maximum value was obtained at austempering temperature of $400^{\circ}C$. The values of tensile strength-elongation balance increased with decreasing intercritical annealing temperature and maximum value was obtained at austempering temperature of $400^{\circ}C$. The maximum value of tensile strength-elongation balance was obtained at a retained austenite content of about 12%. Tensile shear strength of the specimens with retained austenite was higher than that of the normalizing specimens. With increasing welding current and time, the tensile shear strengh and nugget diameter increased, while nugget thickness showed the peak value and then decreased. The optimum range of welding condition at the given welding pressure of 350kgf was 7~11kA and 10~15 cycles.

• 열처리공학회지
• /
• 제30권5호
• /
• pp.215-221
• /
• 2017

The effect of austenitizing temperature on the degree of carbides re-solutionizing, mean graine size, hardness and the volume fraction of retaind austenite ($V_{\gamma}$) etc., has been studied by means of metallography, X-ray diffractometry and hardness measurement in STD 11 tool steel. As austenitizing temperature increases, the amount of alloying elements which is re-dissolved into matrix increases, resulting in increase of $V_{\gamma}$, due to the chemical stabilization of austenite. The Vickers hardness value decreases with increasing austenitizing temperature, which is attributed to grain size as well the volume fractions of $V_{\gamma}$ and carbides. Theoretical diffraction intensity of (200) ${\alpha}^{\prime}$, (211) ${\alpha}^{\prime}$ (200) ${\gamma}$ and (220) ${\gamma}$ peaks obtained by $CuK_{\alpha}$ chracteristics X-ray (${\lambda}=0.15429nm$) was calculated, and quantitative analysis of $V_{\gamma}$ could be carried out by X-ray diffraction method. The resultant value is well coincided with the value obtained by image analysis method. When the quenched specimen is tempered above $200{\sim}400^{\circ}C$ for 30 min, the transition carbides i.e., MC and $M_2C$ in the size of about 20 nm begin to precipitate at $300^{\circ}C$.

• 한국초전도ㆍ저온공학회논문지
• /
• 제19권3호
• /
• pp.27-32
• /
• 2017

The effects of artificial holes on the trapped magnetic fields and magnetic levitation forces of very large single-grain $Y_{1.5}Ba_2Cu_3O_{7-y}$ (Y1.5) bulk superconductors were studied. Artificial holes were made for Y1.5 powder compacts by die pressing using cylindrical dies with a diameter of 30 mm or 40 m, or rectangular dies with a side length of 50 mm. The single grain Y1.5 bulk superconductors (25 mm, 33 mm in diameter and 42 mm in side length) with artificial holes were fabricated using a top-seeded melt growth (TSMG) process for the die-pressed Y1.5 powder compacts. The magnetic levitation forces at 77 K of the 25 mm single grain Y1.5 samples with one (diameters of 4.2 mm) or six artificial holes (diameters of 2.5 mm) were 10-17% higher than that of the Y1.5 sample without artificial holes. The trapped magnetic fields at 77 K of the Y1.5 samples with artificial holes were also 9.6-18% higher than that of the Y1.5 sample without artificial holes. The 33 mm and 42 mm single grain Y1.5 samples with artificial holes (2.5 mm and 4.2 mm in diameter) also showed trapped magnetic fields 10-13% higher than that of the Y1.5 samples without artificial holes in spite of the reduced superconducting volume fraction due to the presence of artificial holes. The property enhancement in the large single grain Y1.5 bulk superconductors appears to be attributed to the formation of the pore-free regions near the artificial holes and the homogeneous oxygen distribution in the large Y123 grains.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.423-423
• /
• 2007

In this study, the effects of annealing conditions on the structural and optical properties of ZnO films were investigated. ZnO oxide (ZnO) films were deposited onto $SiO_2$/Si substrates by RF magnetron sputtering from a ZnO target. The substrate was not heated during deposition. ZnO films were annealed in temperature ranges of $500{\sim}650^{\circ}C$ in the $O_2$ flow for 5 ~ 20 min. The film average thicknesses were in the range of 291 nm. The surface morphologies and structures of the samples were characterized by SEM and XRD, respectively. The optical properties were evaluated by PL measurement at room temperature using a He-Cd 325 nm laser. According to the results, the optimal annealing conditions for the best photoluminescence (PL) characteristics were found to be oxygen fraction, ($O_2/O_2+Ar$) of 20%, RF power of 240W, substrate temperature of RT (room temperature), annealing condition of $600^{\circ}C$ for 20 min, and sputtering pressure of 20 mTorr. The obtained wavelength of light emission was found at 379 nm (ultraviolet-UV region). However, the optimal parameters for the best PL characteristics of ZnO thin films were not consistent with those obtained from the (002) intensities of XRD analyses. As a result, XRD pattern was not considered as the key issue concerning the intensity of PL of ZnO thin film. The intensity of the emitted UV light will correspond to the grain size of ZnO film.

• 한국미생물·생명공학회지
• /
• 제37권1호
• /
• pp.33-41
• /
• 2009

알래스카산 낙엽진흙버섯[Porodaedalea pini (Brot.) Murrill] (syn. Phellinus pini)의 자실체 조분쇄물로부터 $100^{\circ}C$에서 4시간 추출하여 건량 수율 20.5%의 건조 분말 열수추출물을 제조하여, HeLa 세포에서 CVB3에 대한 항바이러스 활성을 조사한 결과 plaque 형성을 현저히 억제하였다. 또한, 다른 여러 가지 버섯 추출물에 비해 neuraminidase 활성 저해능이 가장 높았다. 열수 추출물로부터 75% 에탄올 침전으로 건량 수율 28.3%의 저분자 상등액 건조물(ES)과 수율 43.3%의 고분자 침전물 건조물(EP)을 얻었다. 상등액인 ES에서는 항바이러스 활성이 없었지만, 침전물인 EP는 HeLa 세포에서 CVB3바이러스에 대해 농도 의존적으로 plaque 형성을 현저히 억제하였고, $EC_{50}$은 0.45 mg/mL 이었으며, HeLa 세포에 대한 세포독성 $CC_{50}$은 2.25mg/mL 이었다. 또한, EP는 neureminidase 활성을 농도 의존적으로 저해하였으며, 1.7mg/mL에서 약 75%의 효소활성 억제효과를 보였다. 이러한 결과는 낙엽진흙버섯 자실체의 별수추출물로부터 얻어진 에탄을 침전물 EP가 CVB3 뿐만 아니라, influenza virus(Flu)등에 대해서도 광범위하게 항바이러스 활성을 나타낼 가능성을 보여 주었다. EP는 다당류로서 glucose의 함량이 79.8%로 가장 높았고 galactose, xylose, mannose와 fucose를 소량 포함한 수용성 heteroglycan의 일종으로, 소량(12.7%, w/w)의 단백질 또는 작은 펩타이드를 함유한 당단백의 일종일 것으로 사료된다.

• 한국식품과학회지
• /
• 제51권5호
• /
• pp.480-485
• /
• 2019

열풍 건조된 흰점박이꽃무지 유충, 장수풍뎅이 유충, 쌍별귀뚜라미 성충 및 갈색거저리 유충의 분말을 4% (w/v)의 기질용액으로 제조한 후, 단백질 분해효소인 alcalase를 기질 대비 1% (v/w) 첨가하여 8시간 가수분해 시킨 단백가수분해물을 제조하였다. 각 식용곤충별 단백가수분해물의 특성과 실제 생산된 펩타이드의 양을 알아보기 위해 SDS-PAGE와 TNBS법을 실시하였다. 그 결과, 모든 식용곤충 가수분해물의 가수분해가 우수하게 진행되었음을 확인하였으며, 8시간 가수분해 시 펩타이드 생산량은 갈색거저리유충이 2.45 mg/mL로 가장 높았고, 쌍별귀뚜라미 성충 1.48 mg/mL, 흰점박이꽃무지 유충 1.20 mg/mL, 장수풍뎅이 유충 0.74 mg/mL 순으로 나타났다. 각 식용곤충별 단백가수분해물(${\leq}3kDa$)의 DPPH 라디칼 소거 활성은 쌍별귀뚜라미 성충, 흰점박이꽃무지유충, 갈색거저리 유충, 장수풍뎅이 유충 순으로 나타나 쌍별귀뚜라미 성충 단백가수분해물의 항산화 활성이 가장 우수하였다(p<0.05). ABTS 라디칼 소거 활성은 갈색거저리 유충, 쌍별귀뚜라미 성충, 장수풍뎅이 유충, 흰점박이꽃무지 유충 순으로 나타났으며(p<0.05), $H_2O_2$ 소거 활성은 네 가지 식용곤충 모두 유사한 활성을 보였다. FRAP법에 의한 환원력을 TEAC값으로 나타낸 결과, 쌍별귀뚜라미 성충이 다른 식용곤충들에 비해 월등히 우수한 환원력을 보였다(p<0.05). Linoleic acid에 대한 산화 억제활성 $100{\mu}g/mL$의 농도에서 비교 측정한 결과, 3일 째 음성대조군 대비 쌍별귀뚜라미 성충이 60.26%의 저해율을 보여 가장 우수한 항산화력을 보였다(p<0.05). 최종적으로 본 연구에서는 식용곤충 간의 항산화 활성을 비교하기 위해 다양한 활성산소종을 대상으로 한 항산화 활성 측정 및 지질 산화 억제 활성 측정을 통해 종합적인 항산화 활성을 비교하였다. 그 결과, 쌍별귀뚜라미 성충 단백가수분해물의 DPPH 라디칼 소거 활성, FRAP법에 의한 환원력 및 linoleic acid에 대한 산화 억제 활성 실험에서 항산화 활성이 월등히 우수함을 확인하였으며, 추후 쌍별귀뚜라미 성충 유래 항산화 펩타이드 분리 및 분석에 대한 연구를 통해 새로운 기능성 식품 및 소재 개발에 기여할 수 있을 것이라 예상된다.

• 센서학회지
• /
• 제12권2호
• /
• pp.66-71
• /
• 2003

Pt/AlGaN Schottky-type UV photodetectors were designed and fabricated. A low-temperature AlGaN interlayer buffer was grown between the AlGaN and GaN film in the diode structure epitaxy to obtain crack-free AlGaN active layers. A comparison was then made of the structural, electrical, and optical characteristics of two different diodes: one with an AlGaN($0.5\;{\mu}m$)/n+-GaN(2 nm) structure (type 1) and the other with an AlGaN($0.5\;{\mu}m$)/AlGaN interlayer($150\;{\AA}$)/n+-GaN($3\;{\mu}m$) structure(type 2). A crack-free AlGaN film was obtained by the insertion of a low-temperature AlGaN interlayer with an aluminum mole fraction of 26% into the $Al_xGa_{1-x}N$ layer. The fabricated Pt/$Al_{0.33}Ga_{0.67}N$ photodetector had a leakage current of 1 nA for the type 1 diode and $0.1\;{\mu}A$ for the type 2 diode at a reverse bias of -5 V. For the photoresponse measurement, the type 2 diode exhibited a cut-off wavelength of 300 nm, prominent responsivity of 0.15 A/W at 280 nm, and UV-visible extinction ratio of $1.5{\times}10^4$. Accordingly, the Pt/$Al_{0.33}Ga_{0.67}N$ Schottky-type ultraviolet photodetector with an AlGaN interlayer exhibited superior electrical and optical characteristics and improved UV detecting properties.