• Korean Journal of Materials Research
• /
• v.8 no.10
• /
• pp.961-968
• /
• 1998

In order to investigate the effects of substrate bias voltage on the formation of$ZnS-SiO_2$ protective film in phase change optical disk by R.F. magnetron sputtering method, thin dielectric film was formed on Si wafer and Corning glass by using ZnS(80mol%)-$SiO_2$(20mol%)t arget under argon gas. In this study, the Taguchi experimental method was applied in order to obtain optimum conditions with reduced number of experiments and to control numerous variables effectively. At the same time this method can assure the reproducibility of experiments. Optimum conditions for film formation obtained by above method were target RF power of 200 W. substrate RF power of 20 W, Ar pressure of 5 mTorr. sputtering time of 20 min.. respectively. The phase of specimen was determined by using XRD and TEM. The compositional analysis of specimen was performed by XPS test. In order to measure the thermal resistivity of deposited specimen, annealing test was carried out at $300^{\circ}C$ and $600^{\circ}C$. For the account of void fraction in thin film, the Bruggeman EMA(Effective Medium Approximation) method was applied using the optical data obtained by Spectroscopic Ellipsometry. According to the results of this work, the existence of strong interaction between bias voltage and sputtering time was confirmed for refractive index value. According to XRD and TEM analysis of specimen, the film structure formed in bias voltage resulted in more refined structures than that formed without bias voltage. But excess bias voltage resulted in grain growth in thin film. It was confirmed that the application of optimum bias voltage increased film density by reduction of void fraction of about 3.7%.

• Food Science of Animal Resources
• /
• v.31 no.5
• /
• pp.663-667
• /
• 2011

This study was performed to measure the angiotensin I-converting enzyme (ACE) inhibitory activity of peptide extracts derived from the enzymatic proteolysis of Hanwoo Musculus longissimus (M. longissimus) during cold storage. Thermolysin (80 ppm, w/w) and protease type XIII (100 ppm, w/w) were injected separately or in combination for the enzymatic proteolysis of sarcoplasmic and myofibrillar proteins prior to storage at $5^{\circ}C$ (T1) or at $-1^{\circ}C$ (T2) in a chilling room for 9 days. Beef injected with thermolysin (E2) and thermolysin+protease type XIII (E3) showed a significantly higher degree of hydrolysis at both storage temperatures (p<0.05). During the storage period, T1E2 at day 6 and T1E3 at day 9 showed the strongest ACE inhibitory activity with sarcoplasmic and myofibrillar protein proteolysates. Macromolecules greater than 10,000 Da were removed by ultra filtration, and the filtrates were separated into fractions using gel filtration. Five and three major fractions were collected from S-T1E2-6 and M-T1E3-9 extracts, respectively, and the $4^{th}$ fraction of the S-T1E2-6 extracts showed the highest ACE inhibitory rate of $61.96{\pm}7.41%$.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1998.11a
• /
• pp.161-161
• /
• 1998

To achieve the aim of this investigation, the extracellular protease was isolated from bacteria BAC-4, a strain was cultivated in the medium for the production of penicillin acilase in a period of 32 hours. The enzyme was first purified by aceton precipitation method, followed by ion exchange chromatography on DEAE-sephacel column. The highest specific activity of the aceton fraction was found to be 2.19 unit per mg, with degree of purification of 13 times. Further purification of the enzyme on DEAE -sephacel had a specific activity of 58.6 unit per mg and degree of purification of 344 times compared to its crude extract. The optimum pH of the enzyme was 8.4, and the potimum temparature was 37$^{\circ}C$. The K$\_$M/ and $V_{max}$ calculated at experiment conditions were found to be 0.66%(W/V) and 3.61 unit per mL respectively.

• Journal of Powder Materials
• /
• v.7 no.2
• /
• pp.78-84
• /
• 2000

P/M high speed steels(1.28% C, 4.20% Cr, 6.40% W, 5.00% Mo, 3.10% V, bal. Fe) from two different venders were applied to powder compacting punch. The test results show that failure lifes were very different between two punches. These were no difference in volume fraction and mean size of carbides(MC or M6C) but non-metallic inclusions in two punches. Small amount of non-metallic inclusion in the punch did not greatly affect impact energy and transverse rupture strength (TRS). But, fatigue life was drastically decreased by non-metallic inclusions. These results show that fatigue failure was initated around non-metallic inclusion by cyclic load and the fatigue life was greatly affected by the presence of non-metallic inclusions in the punch.

• Journal of the Korean Chemical Society
• /
• v.27 no.1
• /
• pp.18-23
• /
• 1983

To understand the abnormal absorption behavior of rare earths in cation exchange resins, the absorption for Ce(III), Tb(III) and $Cl^-$ ions in Dowex 50W-X2 have been investigated by spectrophotometry in the concentration range of $1{\sim}12$ M HCI and $HCl-HClO_4$ mixed solutions. The amount of $Cl^-$ ion absorbed shows that the ratio of amount of $Cl^-$ ions to that of rare earths does not exceed 10% in the concentration range of $6{\sim}8M$ HCl and decreased gradually to 3% at 2M HCl and 6% at 12M HCl. The ratio is further decreased with the fraction of $HClO_4$ in $HCl-HClO_4$ mixed solutions and the decrease is presumably due to the weak tendency to form a complex between rare earths and $Cl^-$ ions in a cation exchange resin. The effect of $ClO_4^-$ is expected to play a more important role than that of $Cl^-$ ions in the large absorption of rare earths.

• Fire Science and Engineering
• /
• v.17 no.3
• /
• pp.7-12
• /
• 2003

A 50 kW polyurethane fire in a compartment of 4 m ${\times}$ 1 m ${\times}$ 1.5m with large openings similar to a subway station was simulated by a large eddy simulation to investigate the fire and smoke control. The NIST FDS, which employed a mixture fraction combustion model and a finite volume method for radiation, was utilized. Distribution of temperature and smoke particles was compared with in the lower and upper corridors for three different smoke control systems, ventilation, purge, and extraction, starting in 5 sec from the ignition of the fire. For the given geometries, the ventilation system showed the best smoke removal rate and lowest temperature distribution in the both corridors. It was confirmed that the purge system is not recommended for a subway station since the smoke removal rate of the purge system was worse than that without a smoke control system.

• Applied Biological Chemistry
• /
• v.34 no.2
• /
• pp.117-124
• /
• 1991

Soybean plants inoculated with Bradyrhizobium japonicum MN 110 were supplied with nutrient solutions containing 1.0, 0.25 and 0.5.nM-P to characterize the effect of externaI-P supply on the phosphorus status of nodules and on the P-uptake system of isolated bacteroids from nodules. After 48 days of growth, whole plant dry mass in the 0.25 and 0.05 mM-P treatments decreased significantly. The Pi concentrations in nodules were 4.1, 2.5 and 2.0 mM for 1.0, 0.25 and 0.05 mM-P treatments, respectively. The external-P supply did not significantly affect the distribution of phosphorus among inorganic phosphate(Pi), soluble organic-phosphorus(SOP) and insoluble organic-phosphorus(TOP) fractions in nodules. The Pi concentrations in young leaves of 0.25 and 0.05 mM-P plants were 33% and 20% , respectively, of those in young leaves of 1.0 mM-P plants and Pi concentrations in old leaves were only 16% and 7%, respectively, of those in old leaves of 1.0 mM-P plants. Phosphorus deficiency decreased the percentage of total leaf phosphorus in the Pi fraction and increased the percentage of total leaf phosphorus in the IOP fraction. The bacteroid number ranged from 0.87 to $1.30{\times}10^{11}$ Per GFW nodule regardless of external-P supply to the host Plants and Plant age, The P-uptake rates were the same (15-16 pmoles /min./$10^8$ bacteroids) for the bacteroids isolated from nodules of 1.0 mM-P and 0.05 mM-P plants. These results indicate that Pi concentrations in nodules of phosphorus-deficient plants are sufficient for proliferation of bacteroids and that the P-uptake system of bacteroids is in a repressed state even when host plant growth is severely restricted by phosphorus-deficiency stress.

• Korean Journal of Materials Research
• /
• v.23 no.1
• /
• pp.53-58
• /
• 2013

Superhydrophobic $SiO_2$ layers with a micro-nano hierarchical surface structure were prepared. $SiO_2$ layers deposited via an electrospray method combined with a sol-gel chemical route were rough on the microscale. Au particles were decorated on the surface of the microscale-rough $SiO_2$ layers by use of the photo-reduction process with different intensities ($0.11-1.9mW/cm^2$) and illumination times (60-240 sec) of ultraviolet light. With the aid of nanoscale Au nanoparticles, this consequently resulted in a micro-nano hierarchical surface structure. Subsequent fluorination treatment with a solution containing trichloro(1H,2H,2H,2H-perfluorooctyl)silane fluorinated the hierarchical $SiO_2$ layers. The change in surface roughness factor was in good agreement with that observed for the water contact angle, where the surface roughness factor developed as a measure needed to evaluate the degree of surface roughness. The resulting $SiO_2$ layers revealed excellent repellency toward various liquid droplets with different surface tensions ranging from 46 to 72.3 mN/m. Especially, the micro-nano hierarchical surface created at an illumination intensity of $0.11mW/cm^2$ and illumination time of 60 sec showed the largest water contact angle of $170^{\circ}$. Based on the Cassie-Baxter and Young-Dupre equations, the surface fraction and work of adhesion for the micronano hierarchical $SiO_2$ layers were evaluated. The work of adhesion was estimated to be less than $3{\times}10^{-3}N/m$ for all the liquid droplets. This exceptionally small work of adhesion is likely to be responsible for the strong repellency of the liquids to the micro-nano hierarchical $SiO_2$ layers.

• Journal of the Korean Magnetics Society
• /
• v.10 no.1
• /
• pp.11-15
• /
• 2000

13Cr-1.5Nb-Fe alloy powder prepared by water atomizing method is reduced with flowing hydrogen gas. The characteristics of a reduced alloy powder is investigated and magnetic cores formed by using the reduction power sintered in the vacuum of ∼10$\^$-5/ Torr. In order to study on the magnetic cores permeability and power loss in alternating magnetic field are also measured. The result of particle size distribution shows the paticle size is 70 ㎛ at volume fraction of 50 %. The saturation magnetization of the reduced alloy powder is 160 emu/g. The relative peak permeability (H$\_$a/=5Oe) of a magnetic core is 400 and the power loss (B$\_$m/=80G) 0.12 mW/cc at sintering temperature of 1,200 $\^{C}$, 10 ton/㎠ forming pressure, and 1 kHz.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.389-392
• /
• 2015

We identify a strong lensing galaxy in the cluster IRC 0218 that is spectroscopically confirmed to be at z = 1.62, making it the highest-redshift strong lens galaxy known. The lens is one of the two brightest cluster galaxies and lenses a background source galaxy into an arc and a counterimage. With Hubble Space Telescope (HST) grism and Keck/LRIS spectroscopy, we measure the source redshift to be $z_S=2.26$. Using HST imaging, we model the lens mass distribution with an elliptical power-law profile and account for the effects of the cluster halo and nearby galaxies. The Einstein radius is $^{\theta}E=0.38^{+0.02{\prime}{\prime}}_{-0.01}$ ($3.2^{+0.2}_{-0.1}kpc$) and the total enclosed mass is $M_{tot}(<^{\theta}_E)=1.8^{+0.2}_{-0.1}{\times}10^{11}M_{\odot}$. We estimate that the cluster environment contributes ~ 10% of this total mass. Assuming a Chabrier IMF, the dark matter fraction within $^{\theta}E$ is $f^{Chab}_{DM}=0.3^{+0.1}_{-0.3}$, while a Salpeter IMF is marginally inconsistent with the enclosed mass ($f^{Salp}_{DM}=-0.3^{+0.2}_{-0.5}$).