• 제목/요약/키워드: M-pass

검색결과 740건 처리시간 0.031초

트랜스컨덕턴스(gm)를 이용한 전류모드 능동필터의 이득 및 주파수 제어 (The Gain & Frequency Control of Current-Mode Active Filter with Transconductance-gm Value)

  • 이근호;조성익;방준호;김동룡
    • 전자공학회논문지C
    • /
    • 제35C권6호
    • /
    • pp.30-38
    • /
    • 1998
  • 본 논문에서는 능동필터 설계시 기본 블록으로 이용될 수 있으며, 저전압 고주파에서 동작 가능한 새로운 구조의 CMOS 전류모드 적분기를 제안하였다. 더불어 전압조절을 통해 그 이득과 주파수를 제어할 수 있는 트랜스컨덕턴스 제어회로를 설계하였다. 제안된 적분기는 CMOS 상보형 회로로 구성하였으며, 따라서 적분기의 단위이득주파수에 영향을 주는 적분기의 트랜스컨덕턴스를 증가 시켰다. 제안된 적분기의 단위이득 주파수는 NMOS-gm을 가지는 기존의 적분기에 비하여 두 배 가까이 증가되었다. 또한 트랜스컨덕턴스 제어회로를 이용하여 능동필터의 공정시 나타날 수 있는 오차를 줄이고, 그 용도에 따라 주파수와 이득제어를 가능하게 하였다. 이의 응용회로로서 3차 체비셰프 저역필터를 0.8㎛ CMOS 파라메터를 이용하여 설계하였으며, 이러한 결과들은 소신호 해석 및 0.8㎛ 공정 파라미터를 갖는 HSPICE 시뮬레이션을 통하여 검증되었다.

  • PDF

Experimental investigation of force-distribution in high-strength bolts in extended end-plate connections

  • Abdalla, K.M.;Abu-Farsakh, G.A.R.;Barakat, S.A.
    • Steel and Composite Structures
    • /
    • 제7권2호
    • /
    • pp.87-103
    • /
    • 2007
  • This paper presents some of the results from an experimental research project on the behavior of extended end-plate connections subjected to moment conducted at the Structural Laboratory of Jordan University of Science and Technology. Since the connection behavior affects the structural frame response, it must be included in the global analysis and design. In this study, the behavior of six full-scale stiffened and unstiffened cantilever connections of HEA- and IPE-sections has been investigated. Eight high strength bolts were used to connect the extended end-plate to the column flange in each case. Strain gauges were installed inside each of the top six bolts in order to obtain experimentally the actual tension force induced within each bolt. Then the connection behavior is characterized by the tension force in the bolt, extended end-plate behavior, moment-rotation relation, and beam and column strains. Some or all of these characteristics are used by many Standards; therefore, it is essential to predict the global behavior of column-beam connections by their geometrical and mechanical properties. The experimental test results are compared with two theoretical (equal distribution and linear distribution) approaches in order to assess the capabilities and accuracy of the theoretical models. A simple model of the joint is established and the essential parameters to predict its strength and deformational behavior are determined. The equal distribution method reasonably determined the tension forces in the upper two bolts while the linear distribution method underestimated them. The deformation behavior of the tested connections was characterized by separation of the column-flange from the extended end-plate almost down to the level of the upper two bolts of the lower group and below this level the two parts remained in full contact. The neutral axis of the deformed joint is reasonably assumed to pass very close to the line joining the upper two bolts of the lower group. Smooth monotonic moment-rotation relations for the all tested frames were observed.

Manipulation of Cassava Cultivation and Utilization to Improve Protein to Energy Biomass for Livestock Feeding in the Tropics

  • Wanapat, M.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제16권3호
    • /
    • pp.463-472
    • /
    • 2003
  • Cassava (Manihot esculenta, Crantz), an annual tropical tuber crop, was nutritionally evaluated as a foliage for ruminants, especially dairy cattle. Cultivation of cassava biomass to produce hay is based on a first harvest of the foliage at three months after planting, followed every two months thereafter until one year. Inter-cropping of leguminous fodder as food-feed between rows of cassava, such as Leucaena leucocephala or cowpea (Vigna unculata), enriches soil fertility and provides additional fodder. Cassava hay contained 20 to 25% crude protein in the dry matter with good profile of amino acids. Feeding trials with cattle revealed high levels of DM intake (3.2% of BW) and high DM digestibility (71%). The hay contains tannin-protein complexes which could act as rumen by - pass protein for digestion in the small intestine. As cassava hay contains condensed tannins, it could have subsequent impact on changing rumen ecology particularly changing rumen microbes population. Therefore, supplementation with cassava hay at 1-2 kg/hd/d to dairy cattle could markedly reduce concentrate requirements, and increase milk yield and composition. Moreover, cassava hay supplementation in dairy cattle could increase milk thiocyanate which could possibly enhance milk quality and milk storage, especially in small holder-dairy farming. Condensed tannins contained in cassava hay have also been shown to potentially reduce gastrointestinal nematodes in ruminants and therefore could act as an anthelmintic agent. Cassava hay is therefore an excellent multi-nutrient source for animals, especially for dairy cattle during the long dry season, and has the potential to increase the productivity and profitability of sustainable livestock production systems in the tropics.

파킨슨 환자들의 장애물 보행 향상을 위한 하지의 근육 활동 규명 (Lower Extremity Muscle Activity on the Obstacle Gait in Older Parkinson Diseases)

  • 임비오;김미영
    • 한국운동역학회지
    • /
    • 제17권4호
    • /
    • pp.141-148
    • /
    • 2007
  • Falls associated with tripping over an obstacle can be dangerous, yet little is known about the strategies used for stepping over obstacles in older Parkinson disease. The purpose of this study was to investigate the lower extremity muscle activity on the obstacle gait according to obstacle height in older Parkinson diseases. The obstacle gait of 7 older Parkinson disease was examined during a 5.0 m approach to, and while stepping over, obstacles of 0, 25, 52, and 152mm. Seven pairs of surface electrodes(Noraxon MyoResearch, USA) were attached to the right-hand side of the body to monitor the adductor longus(AL), gluteus medius(GME), gluteus maximus(GMA), biceps femoris(BF), rectus femoris(RF), gastrocnemius(GA), tibialis anterior(TA). Electromyography data were filtered using a 10Hz to 350 Hz Butterworth band-pass digital filter and normalized to the maximum value in the analyzed phases. A one-way ANOVA for repeated measures was employed for selected electromyography variables to analyze the differences of the height of four obstacles. The results showed significant differences between 0.0mm and 25, 52, and 152mm obstacle height in TA and GA activities during the second phase(swing phase). But the more increase obstacle height, the more not increase the muscle activities. This means that the Parkinson disease stepping over obstacle inefficiency. To prevent and reduce the frequency of falls, elderly Parkinson disease maintained and improved their balance, muscular strength, neuromuscular control and mobility.

구리 기판에 전착시킨 니켈과 니켈합금의 집합조직 형성 (Texture Formation of Eletroplated Nickel and Nickel Alloy on Cu Substrate)

  • 김재근;이선왕;김호진;홍계원;이희균
    • Progress in Superconductivity
    • /
    • 제7권2호
    • /
    • pp.145-151
    • /
    • 2006
  • Nickel and nickel-tungsten alloy were electroplated on a cold rolled and heat treated copper(Cu) substrate. 4 mm-thick high purity commercial grade Cu was rolled to various thicknesses of 50, 70, 100 and 150 micron. High reduction ratio of 30% was applied down to 150 micron. Rolled texture was converted into cube texture via high temperature heat treatment at $400-800^{\circ}C$. Grain size of Cu was about 50 micron which is much smaller compared to >300 micron for the Cu prepared using smaller reduction pass of 5%. 1.5 km-long 150 micron Cu was fabricated with a rolling speed of 33 m/min and texture of Cu was uniform along length. Abnormal grain growth and non-cube texture appeared for the specimen anneal above $900^{\circ}C$. 1-10 micron thick Ni and Ni-W film was electroplated onto an annealed cube-textured Cu or directly on a cold rolled Cu. Both specimens were annealed and the degree of texture was measured. For electroplating of Ni on annealed Cu, Ni layer duplicated the cube-texture of Cu substrate and the FWHM of in plane XRD measurement for annealed Cu layer and electroplated layer was $9.9^{\circ}\;and\;13.4^{\irc}$, respectively. But the FWHM of in plane XRD measurement of the specimen which electroplated Ni directly on cold rolled Cu was $8.6^{\circ}$, which is better texture than that of nickel electroplated on annealed Cu and it might be caused by the suppression of secondary recrystallization and abnormal grain growth of Cu at high temperature above $900^{\circ}C$ by electroplated nickel.

  • PDF

니켈도금된 S45C강의 연속파형 Nd:YAG 레이저 겹치기용접 특성 (Characteristics of CW Nd:YAG Laser Lap Welds of Nickel Coated S45C Steel)

  • 유영태;신호준
    • Journal of Welding and Joining
    • /
    • 제25권3호
    • /
    • pp.18-27
    • /
    • 2007
  • Laser welding process is widely used in the industrial field due to its numerous advantages: a small heat affected zone(HAZ), deep penetration, high welding speed, ease of automation, single-pass thick section capability, enhanced design flexibility, and small distortion after welding. The objective of this research works is to investigate the influence of the process parameters, such as the welding fur metals with CW Nd:YAG lasers. The bead-on-plate and Lap welding experiments are carried out for several combinations of the experimental conditions. In order to quantitatively examine the characteristics of the welding quality of the cross section, tensile stress behavior and the hardness of the welded part are investigated in comparison of the Nickel coated and Nickel uncoated S45C steel. As a result of experiment, nickel coated S45C Steel showed more even weld zone than Nickel uncoated counterpart upon lap welding. Also, it showed relatively small amount of internal defects and spatter, and Nickel coated S45C showed better weldability than Nickel uncoated S45C steel. The optimum welding process upon lap welding of Nickel coated S45C steel is when each laser power is 1900W; focal positions is -1mm; welding speed is $0.9{\sim}1.0m/min$. The heat input was $4.178{\sim}4.36{\times}103J/cm^2$.

형광입자를 이용한 분리막 표면 검측 방법의 파일럿 규모 플랜트 적용 (Application of fluorescent particles as a tracer to detect the membrane surface damage in a pilot scale membrane bioreactor)

  • 김초아;김희준;조진우
    • 상하수도학회지
    • /
    • 제30권1호
    • /
    • pp.33-40
    • /
    • 2016
  • In this study, a fluorescent silica nano particle is used as the surrogate for challenging test of membrane surface integrity. The particles are functionalized by a fluorescent dying agent so that as an ultraviolet light is imposed a bright fluorescent image from the particles can be taken. If a membrane surface is damaged and has a compromised part larger than the size of surrogate the fluorescent particles would pass through and contained in the permeate. An operator can directly notice whether the membrane surface is damaged or not by detecting a fluorescent image taken from the permeate. Additionally, the size of compromised part is estimated through analysing the fluorescent image in which we surmise the mass of particles included in the permeate by calculating an average RGB value of the image. The pilot scale experiments showed that this method could be applied successfully to determine if a membrane surface had a damaged parts regardless of the test condition. In the testing on the actual damaged area of $4.712mm^2$, the lowest error of estimating the damaged area was -1.32% with the surrogate concentration of 80 mg/L, flux of $40L/m^2/hr$ for 25 minutes of detection. A further study is still going on to increase the lowest detection limit and thus decrease the error of estimation.

Use of Dye Deposition in Cows' Excised Genital Tract to Evaluate Inseminators' and Refreshment Training to Refreshment Training to Improve Their Skill

  • Mohammed S.;Mohammad S. H.;Mohhammad A. R. S.;Khan A.H.M.S.I.
    • 한국수정란이식학회지
    • /
    • 제20권2호
    • /
    • pp.157-162
    • /
    • 2005
  • To find out the possible inefficiencies of artificial inseminators at rectovaginal insemination in cows, inseminators' skill were evaluated by controlling the semen thawing procedure adopted and by using the technique of dye deposition in the genital tract of slaughtered cows. This was followed by refreshment training for the inseminators. Thirty seven artificial insemination technicians regularly working in the government, cooperative and NGO (Non Government Organization) artificial insemination programmes at different places of Bangladesh were included in the study. Individual technicians were asked to thaw a semen straw and deposit dye in the genital tract of slaughtered cows following the procedures they would have adopted in their actual practices of insemination. The time and water temperature adopted by technicians were recorded and genital tract after sham artificial insemination was dissected to determine the site of dye deposition. Then, the inseminators took part in a three days intensive training program. The training program was ended up with the same tests for thawing frozen semen straw and dye deposition in the genital tract of slaughtered cows. At pre training evaluation, only $25\%\;and\;72\%\;(n=36)$ inseminators adopted co..ect thawing time and temperature, respectively. At post training evaluation, all inseminators thawed semen straws for proper time and temperature. At pretraining evaluation, $21(57\%),\;11 (30\%)\;and\;3(8\%)$ inseminators deposited dye at the body of uterus, in the vagina or in cervix, and into the horn of uterus, respectively. In $2(5\%)$ cases dye did not pass into the genital tract, instead back flowed through the space between the barrel of insemination gun and sheath. At post training evaluation, all inseminators successfully deposited dye in the body of uterus. Frequent evaluation of inseminators' skill and subsequent training would help improvement of the artificial insemination technicians' skill.

DEVELOPMENT OF MATDYMO(MULTI-AGENT FOR TRAFFIC SIMULATION WITH VEHICLE DYNAMICS MODEL) II: DEVELOPMENT OF VEHICLE AND DRIVER AGENT

  • Cho, K.Y.;Kwon, S.J.;Suh, M.W.
    • International Journal of Automotive Technology
    • /
    • 제7권2호
    • /
    • pp.145-154
    • /
    • 2006
  • In the companion paper, the composition and structure of the MATDYMO (Multi-Agent for Traffic Simulation with Vehicle Dynamic Model) were proposed. MATDYMO consists of the road management system, the vehicle motion control system, the driver management system, and the integration control system. Among these systems, the road management system and the integration control system were discussed In the companion paper. In this paper, the vehicle motion control system and the driver management system are discussed. The driver management system constructs the driver agent capable of having different driving styles ranging from slow and careful driving to fast and aggressive driving through the yielding index and passing index. According to these indices, the agents pass or yield their lane for other vehicles; the driver management system constructs the vehicle agents capable of representing the physical vehicle itself. A vehicle agent shows its behavior according to its dynamic characteristics. The vehicle agent contains the nonlinear subcomponents of engine, torque converter, automatic transmission, and wheels. The simulation is conducted for an interrupted flow model and its results are verified by comparison with the results from a commercial software, TRANSYT-7F. The interrupted flow model simulation is implemented for three cases. The first case analyzes the agents' behaviors in the interrupted flow model and it confirms that the agent's behavior could characterize the diversity of human behavior and vehicle well through every rule and communication frameworks. The second case analyzes the traffic signals changed at different intervals and as the acceleration rate changed. The third case analyzes the effects of the traffic signals and traffic volume. The results of these analyses showed that the change of the traffic state was closely related with the vehicle acceleration rate, traffic volume, and the traffic signal interval between intersections. These simulations confirmed that MATDYMO can represent the real traffic condition of the interrupted flow model. At the current stage of development, MATDYMO shows great promise and has significant implications on future traffic state forecasting research.

"규호시의방"의 정리학적 고찰 (A Study on the Book "Gwngonsiuebang")

  • 이효지
    • 대한가정학회지
    • /
    • 제19권2호
    • /
    • pp.189-198
    • /
    • 1981
  • The Gwugonsiuebang is a book of Korean woman's life in the Yi dynasty which published I 1653 by Mme. Jang. I have studied the food habits of the Yi dynasty that wrote in Gwugonsiueband as following. The staple foods are Guksu (wheat vemicell as like western noodles) 5, Mandu (bun stuffed with seasoned meat and vegetables) 6 kinds in this book. the side dishes are Guk (soup) 8, J'm (steamed meat or fish) 6, chae6, Nooruemi 5, Hyae (sliced raw fish) 3, Jockpyun (jellied beef soup) 3, Jockgall (salted sea food) 2, Jock (skewer or broach) 2, jihee 2, Sun (Steaming of stuffed vegetable) 1, Bockuem (saute) 1, Jon (pan fried fish) 1, Gui (meat or fish grilled with seasoning) 1, and the other 13 kinds. The desserts are D,ock (Korean rice cake) 11, jabgwa 8, Beverages 5 kinds and Jungwa 1 kind. The alcohol and fruits wine are 51 kinds. The alcohol and fruits wine are 51 kinds. The seasonings are Soybean sauce, oil, Sesamol oil, pepper, Ginger, Garlic, Vinegar, Wine, Salt, Bean paste etc. Raw materials of Guksu, Mandu, D'ock, Jabgwa, Beverage, Wine, vinegar are all carbohydrates. It shows that a tendency of Korean people too much take a carbohydrates. Now and then, there are no special difference of winter over pass for vegetables, fruits, dried beef, dried fish and salt fishes. In yi dynasty, there are 62 kinds of table ware and cooking kitchen utensils, but many of them come to uselessness. 19 kinds of measuring unit are very non-scientific because that is not by weight but by bulk or volume. There are many food making terms which are 198 kinds of prepared cooking term, 11 kinds of cutting term and 20 kinds of boiling term. And 10 kinds of expression of taste can see this book.

  • PDF