• Journal of Technologic Dentistry
• /
• v.33 no.2
• /
• pp.137-145
• /
• 2011

Purpose: To evaluate the accuracy of zirconia copings in terms of clinical verified for the clinical application of CAD/CAM. Methods: Zirconia copings (n=5) were prepared using CAD/CAM system and were sintered using the relevant electrical induction furnace, which uses a 2h sintering program with a maximum temperature of $1500^{\circ}C$. The copings placed at the models and the interval values were measured. Results: The meas interval values between the die and the zirconia copings were $44.14{\mu}m$(A), $44.57{\mu}m$(B), $44.72{\mu}m$(C). 51.05 ${\mu}m$(D). Conclusion: The maximum interval values between the die and the zirconia copings were $51.3{\mu}m$ which is acceptable for clinical use. ${\mu}m$ Proper understanding of the test conditions will help enhancing the accuracy of zirconia coping.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.17 no.1
• /
• pp.48-52
• /
• 2013

Purpose: Bed, living a long time is required in adult patients with brain lesions such as stroke, traumatic brain injury, and Parkinson's disease, causing pneumonia and respiratory diseases may be due to aspiration of food or saliva. In patients with recurrent pneumonia or pulmonary symptoms, there is a need to determine the possibility of pulmonary aspiration due to aspiration of saliva. Materials and Methods: Saliva due to aspiration pneumonia diagnosis in patients with brain lesions request for inspection to the Department of Nuclear Medicine, 10 patients (male 6, female 4) were included in this study. Patients were fasted before the test, $^{99m}Tc_{O4}$ 185 MBq (5 mCi) of less than 1 mL of solution was administered in the oral cavity. Administration and 20 minutes of dynamic imaging acquisition, and immediately after that the static images were acquired. Delayed scan after 2-4 hours if necessary. Results: Positivity rate of all 10 patients was 60%. In 4 patients showed positive reactions after the administration of oral cavity in a 20-minute dynamic imaging were able to confirm whether the aspiration. In the remaining 2 patients, four hours of additional delay tests were able to confirm whether the aspiration. Conclusion: Does not require changes in patient posture compared to the other checks that can be diagnosed with aspiration pneumonia. A simple test and takes less time. Therefore be useful in providing information for the diagnosis and treatment modality.

• Journal of Technologic Dentistry
• /
• v.30 no.2
• /
• pp.79-86
• /
• 2008

The purpose of this study was to investigate the effect retention element formed by metal surface treatment method on the bond strength of indirect composite resin and metal. The metal specimens were cast from Ni-Cr alloy($Rexillium^{(R)}$ III). They were divided into 5 groups by applied retention element: $50{\mu}m$ aluminium oxide sandblasting group, $250{\mu}m$ aluminium oxide sandblasting group, 0.2mm retention crystal group, 10% $H_{2}SO_{4}$ solution etching group, $110{\mu}m$ $Rocatec^{TM}$ Plus system group. Total 50 metal specimens were veneered with Sinfony indirect composite resin system. Specimens were tested for shear bond strength on an Instron universal testing machine and fracture mode of fractured specimens were analyzed by SEM and EDS. 1. 0.2 mm retention crystals were most effective in improving the resin-metal shear bond strength (p<0.05). 2. Sandblasting by $250{\mu}m$ aluminium oxide were more effective than sandblasting by $50{\mu}m$ aluminium oxide in improving the resin-metal shear bond strength(p<0.05). 3. Fracture mode of resin-metal fractured surface were cohesive failure mode in 0.2mm retention crystal, mixed failure mode in sandblasted specimens, etched specimens and the specimens sandblasted with $110{\mu}m$ $Rocatec^{TM}$ Plus system.

• Steel and Composite Structures
• /
• v.29 no.6
• /
• pp.703-716
• /
• 2018

Rapid detection of damages in civil engineering structures, in order to assess their possible disorders and as a result produce competent decision making, are crucial to ensure their health and ultimately enhance the level of public safety. In traditional intelligent health monitoring methods, the features are manually extracted depending on prior knowledge and diagnostic expertise. Inspired by the idea of unsupervised feature learning that uses artificial intelligence techniques to learn features from raw data, a two-stage learning method is proposed here for intelligent health monitoring of civil engineering structures. In the first stage, $Nystr{\ddot{o}}m$ method is used for automatic feature extraction from structural vibration signals. In the second stage, Moving Kernel Principal Component Analysis (MKPCA) is employed to classify the health conditions based on the extracted features. In this paper, KPCA has been implemented in a new form as Moving KPCA for effectively segmenting large data and for determining the changes, as data are continuously collected. Numerical results revealed that the proposed health monitoring system has a satisfactory performance for detecting the damage scenarios of a three-story frame aluminum structure. Furthermore, the enhanced version of KPCA methods exhibited a significant improvement in sensitivity, accuracy, and effectiveness over conventional methods.

• Journal of Gastric Cancer
• /
• v.18 no.2
• /
• pp.142-151
• /
• 2018

Purpose: The modification of the cancer classification system aimed to improve the classical anatomy-based tumor, node, metastasis (TNM) staging by considering tumor biology, which is associated with patient prognosis, because such information provides additional precision and flexibility. Materials and Methods: We previously developed an mRNA expression-based single patient classifier (SPC) algorithm that could predict the prognosis of patients with stage II/III gastric cancer. We also validated its utilization in clinical settings. The prognostic single patient classifier (pSPC) differentiates based on 3 prognostic groups (low-, intermediate-, and high-risk), and these groups were considered as independent prognostic factors along with TNM stages. We evaluated whether the modified TNM staging system based on the pSPC has a better prognostic performance than the TNM 8th edition staging system. The data of 652 patients who underwent gastrectomy with curative intent for gastric cancer between 2000 and 2004 were evaluated. Furthermore, 2 other cohorts (n=307 and 625) from a previous study were assessed. Thus, 1,584 patients were included in the analysis. To modify the TNM staging system, one-grade down-staging was applied to low-risk patients according to the pSPC in the TNM 8th edition staging system; for intermediate- and high-risk groups, the modified TNM and TNM 8th edition staging systems were identical. Results: Among the 1,584 patients, 187 (11.8%), 664 (41.9%), and 733 (46.3%) were classified into the low-, intermediate-, and high-risk groups, respectively, according to the pSPC. pSPC prognoses and survival curves of the overall population were well stratified, and the TNM stage-adjusted hazard ratios of the intermediate- and high-risk groups were 1.96 (95% confidence interval [CI], 1.41-2.72; P<0.001) and 2.54 (95% CI, 1.84-3.50; P<0.001), respectively. Using Harrell's C-index, the prognostic performance of the modified TNM system was evaluated, and the results showed that its prognostic performance was better than that of the TNM 8th edition staging system in terms of overall survival (0.635 vs. 0.620, P<0.001). Conclusions: The pSPC-modified TNM staging is an alternative staging system for stage II/III gastric cancer.

• Proceedings of the PSK Conference
• /
• 2000.10a
• /
• pp.261.1-261.1
• /
• 2000

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.299-300
• /
• 1998

Recently the development of medical modality like as MRI, 3D US, DR etc is very active. Therefore it is more required not only the enhancement of quality in medical service but the improvement of medical system based on quantization, minimization, and optimization of high speed. Especially, as the changing into the digital modality system, it gets to start using ASIC(Application Specific Integrated Circuit) to realize one board system. It requires the implementation of hardware debugging and effective speedy algorithm with more speed and accuracy in order to support and replace existing device. If objected image could be linked to high speed process board with special interface and pre-processed using FPGA, it can be used in real time image processing and protocol of HIS(Hospital Information System). This study can support the basic circuit design of medical image board which is able to realize image processing basically using digitalized medical image, and to interface between existing device and image board containing image processing algorithm.

• Progress in Medical Physics
• /
• v.19 no.1
• /
• pp.63-72
• /
• 2008

With recent advancement of the medical imaging systems and picture archiving and communication system (PACS), installation of digital radiography has been accelerated over past few years. Moreover, Computed Radiography (CR) which was well established for the foundation of digital x-ray imaging systems at low cost was widely used for clinical applications. This study analyzes imaging characteristics for two systems with different pixel sizes through the Modulation Transfer Function (MTF), Noise Power Spectrum (NPS) and Detective Quantum Efficiency (DQE). In addition, influence of radiation dose to the imaging characteristics was also measured by quantitative assessment. A standard beam quality RQA5 based on an international electro-technical commission (IEC) standard was used to perform the x-ray imaging studies. For the results, the spatial resolution based on MTF at 10% for Agfa CR system with I.P size of $8{\times}10$ inches and $14{\times}17$ inches was measured as 3.9 cycles/mm and 2.8 cycles/mm, respectively. The spatial resolution based on MTF at 10% for Fuji CR system with I.P size of $8{\times}10$ inches and $14{\times}17$ inches was measured as 3.4 cycles/mm and 3.2 cycles/mm, respectively. There was difference in the spatial resolution for $14{\times}17$ inches, although radiation dose does not effect to the MTF. The NPS of the Agfa CR system shows similar results for different pixel size between $100{\mu}m$ for $8{\times}10$ inch I.P and $150{\mu}m$ for $14{\times}17$ inch I.P. For both systems, the results show better NPS for increased radiation dose due to increasing number of photons. DQE of the Agfa CR system for $8{\times}10$ inch I.P and $14{\times}17$ inch I.P resulted in 11% and 8.8% at 1.5 cycles/mm, respectively. Both systems show that the higher level of radiation dose would lead to the worse DQE efficiency. Measuring DQE for multiple factors of imaging characteristics plays very important role in determining efficiency of equipment and reducing radiation dose for the patients. In conclusion, the results of this study could be used as a baseline to optimize imaging systems and their imaging characteristics by measuring MTF, NPS, and DQE for different level of radiation dose.

• Journal of the Korean Society of Safety
• /
• v.35 no.5
• /
• pp.49-58
• /
• 2020

In domestic construction sites, when installing steel pipe scaffolding and system scaffolding, the guardrails are installed after the installation of the work platforms. This conventional guardrail system (CGS) is always exposed to the risk of falls because the safety railing is installed later. In order to prevent fall disasters during erecting and dismantling scaffolds, it is necessary to introduce the advanced guardrail system (AGS) which installs railings in advance of climbing onto a work platform. For the introduction of the AGS, the structural performance of the system scaffolding applying the CGS and the AGS was compared and evaluated. The structural analysis of the system scaffold (height: 31 m and width: 27.4 m) with AGS confirmed that structural safety was ensured because the maximum stress of each element of the system scaffolding satisfies the allowable stress of each element. As a result of performance comparison of CGS and AGS for each element, the combined stress ratio of vertical posts in AGS was 6.4% lower than that of CGS. In addition, in the case of ledger and transom, the combined stress ratios of AGS and CGS were almost the same. The compression test of the assembled system scaffolding (three-storied, 1 bay) showed that the AGS had better performance than the CGS by 9.7% (8.91 kN). The cross bracing exceeds the limit on slenderness ratio of codes for structural steel design. But the safety factor for the compressive load of the cross bracing was evaluated as meeting the design criteria by securing 3 or more. In actual experiments, it was confirmed that brace buckling did not occur even though the overall scaffold was buckled. Therefore, in the case of temporary structures, it was proposed to revise the standards for limiting on slenderness ratio of secondary or auxiliary elements to recommendations. This study can be used as basic data for the introduction of AGS for installing guardrails in advance at domestic construction sites.

• Reproductive and Developmental Biology
• /
• v.37 no.3
• /
• pp.143-148
• /
• 2013

Spermatogenesis is initiated from spermatogonial stem cells (SSCs) that has an ability of self-renewal and unipotency to generate differentiating germ cells. The objective of this study is to develop the simple method for derivation of SSCs using non-sorting of both spermatogonia and feeder cells. Simply uncapsulated mouse testes were treated with enzymes followed by surgical mincing, and single cells were cultured in stempro-$34^{TM}$ cell culture media at $37^{\circ}C$. After 5 days of culture, aciniform of SSC colony was observed, and showed a strong alkaline phosphatase activity. Molecular characterization of mouse SSCs showed that most of the mouse SSC markers such as integrin ${\alpha}6$ and ${\beta}1$, CD9 and Stra8. In addition, pluripotency embryonic stem cell (ESC) marker Oct4 were expressed, however Sox2 expression was lowered. Interestingly, expression of SSC markers such as Vasa, Dazl and PLZF were stronger than mouse ESC (mESC). This data suggest that generated mouse SSCs (mSSCs) in this study has at least similar biomarkers expression to mESC and mSSCs derived from other study. Immunocytochemistry using whole mSSC colony also confirmed that mSSCs generated from this study expressed SSC specific biomarkers such as c-kit, Thy1, Vasa and Dazl. In conclusion, mSSCs from 5 days old mouse testes were successfully established without sorting of spermatogonia, and this cells expressed both mESC and SSC specific biomarkers. This simple derivation method for mSSCs may facilitate the study of spermatogenesis.