• KSBB Journal
• /
• v.18 no.3
• /
• pp.211-216
• /
• 2003

The removal yield of dissolved organic matter in drinking water by biological activated carbon (BAC) process was investigated. The tested processes wer raw water-AC process (BAC1), raw water-ozonation-BAC process (BAC2), and raw water-ozonation-coagulation/sedimentation-BAC process (BAC3). The amounts of organic matter was measured as dissolved organic carbon (DOC), ulta-violet radiation at 254 nm wavelength ($UV_{254}$), total nitrogen (T-N), ammonia nitrogen (NH_3$-N), and total phosphate (T-P). As a results, 30.7% DOC was removed by BAC2 process, which showed higher removal efficiency than BAC1 or BAC3 processes. The removal yield of $UV_{254}$ in BAC1, BAC2, and BAC3 processes were observed as 45.3%, 44.6%, 58.4%, respectively. And the removal yield of ammonia nitrogen were 66%, 81%, 29% in each BAC processes. The optimal empty bed contact time (EBCT) of BAC processes was estimated as 10 minute. This study has shown that BAC process combined with ozone treatment was efficient for removing dissolved organic matter in water.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1998.05a
• /
• pp.35-81
• /
• 1998

Distinct Element Method(DEM) has a great advantage to model the discontinuous behaviour of jointed rock masses such as rotation, sliding, and separation of rock blocks. Geometrical data of joints by a field monitoring is not enough to model the jointed rock mass though the results of DE analysis for the jointed rock mass is most sensitive to the distributional properties of joints. Also, it is important to use a properly joint law in evaluating the stability of a jointed rock mass because the joint is considered as the contact between blocks in DEM. In this study, a stochastic modelling technique is developed and the dilatant rock joint is numerically modelled in order to consider th geometrical and mechanical properties of joints in DE analysis. The stochastic modelling technique provides a assemblage of rock blocks by reproducing the joint distribution from insufficient joint data. Numerical Modelling of joint dilatancy in a edge-edge contact of DEM enable to consider not only mechanical properties but also various boundary conditions of joint. Preprocess Procedure for a stochastic DE model is composed of a statistical process of raw data of joints, a joint generation, and a block boundary generation. This stochastic DE model is used to analyze the effect of deviations of geometrical joint parameters on .the behaviour of jointed rock masses. This modelling method may be one tool for the consistency of DE analysis because it keeps the objectivity of the numerical model. In the joint constitutive law with a dilatancy, the normal and shear behaviour of a joint are fully coupled due to dilatation. It is easy to quantify the input Parameters used in the joint law from laboratory tests. The boundary effect on the behaviour of a joint is verified from shear tests under CNL and CNS using the numerical model of a single joint. The numerical model developed is applied to jointed rock masses to evaluate the effect of joint dilation on tunnel stability.

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.1
• /
• pp.44-52
• /
• 1999

Background : Airway infiltration by inflammatory cells, particularly of eosinophils, is one of the characteristic features of asthma. Several mechanisms for the recruitment of eosinophil is focused on the CD4+ T lymphocyte for the preferential production of Th2-c1erived cytokines. Interleukin-10(IL-10) is identified cytokine with potent antiinflammatory activity. This molecule has been shown to inhibit the release of cytokine from inflammatory cells including Th2 cell, and also to inhibit eosinophil survival. We therefore attempted to determine whether decreased synthesis of IL-10 in the lung of bronchial asthma may contribute to inflammation that is characteristics of this dease. Method: Subjects were patients with bronchial asthma(n=23) and normal controls(n=11). IL-10 produced from peripheral mononuclear cell(PBMC) and in bronchoalveolar lavage(BAL) fluid was measured by ELISA method. Degree of bronchial inflammation was assessed by total cell counts and eosinophil percents in BAL fluid, eosinophil infiltration on bronchial biopsy tissue and $PC_{20}$ for methacholine. Results: The IL-10 level produced by PBMC and in BAL fluid from patient with bronchial asthma were not different with normal controls(respectively, $901.6\pm220.4$ pg/ml, $810.9\pm290.8$ pg/ml for PBMC, $24.5\pm9.5$ pg/mL $30.5\pm13.5$ pg/ml for BAL fluid p>0.05). There were significant negative correlation between IL-10 in BAL fluid and eosinophil percents in BAL fluid or degree of eosinophil infiltration in bronchial biopsy (respectively r=-0.522, r=-0.4486 p<0.05). However there was no difference of IL-10 level according to $PC_{20}$ for methacholine. There were no correlation between IL-10 production by PBMC and peripheral blood eosinophil counts or serum eosinophilic cationic protein levels(respectively r=0.1146, r=0.0769 p>0.05). Conclusion: These observation suggest that IL-10 may participate but not acts the crucial role in regulation of the airway inflammation in bronchial asthma.

• Tuberculosis and Respiratory Diseases
• /
• v.53 no.3
• /
• pp.253-264
• /
• 2002

Background : It has been reported that the expression of protein which influences on the cell cycle is significantly involved in the development, progress, treatment response, and survival of cancer, and also that the degree of expression of p27 and CDK4 is related to the prognosis. Recent research has revealed that uteroglobin, tumor suppressor gene, is related to cell cycle. This study is focused on the relations between expression of proteins related to cell cycle and clinical index of and survival of NSCLC. Methods : We examined immunohistochemically specimens of 110 surgically resected NSCLCs for expression of p27, CDK, Uteroglobin. Tissue array slide were obtained from 110 surgically resected NSCLCs. Immunohistochemical staining was performed by immuno-peroxidase technique using avidin-biotinylated horseradish peroxidase complex. Results : In 110 patients with resected NSCLCs, the ratio of male to female was 87:13, the median age was $56.43{\pm}9.41$ yrs. The positive staining of p27 was detected in 75% of the cases. A non-statistically significant trend toward increased p27 expression was observed in smoker and squamous cell cancer. The positive staining of CDK4 was detected in 89%, which was the highest expression of protein among 3 types. The survival ratio of CDK4 negative staining group was higher than that of positive staining group, which was significant diffrernce(P<0.05). There was no association between p27 or uteroglobin expression and survival. Conclusion : The expression degree of CDK4 is related to the prognosis. This findings suggests that the measurement of CDK4 may be useful in identifying patient at high risk for disease recurrence and survival.

• Food Science and Preservation
• /
• v.13 no.6
• /
• pp.774-782
• /
• 2006

This study investigated the hepatoprotective effects of an ethanol extract of lotus root (LRE) on alcohol-induced liver damage in rat. Sprague-Dawley rae weighing $100{\sim}150g$, were divided into 6 groups: basal diet group (BD), alcohol (35% 10 mL/kg/day) teated stoup (ET), LRE 200 mg/kg/day teated group (BD-LREL). LRE 400 mg/kg/day treated group (BD-LREH), LRE 200 mg/kg/day and alcohol treated group (ET-LREL), and LRE 400 3mg/kg/day and alcohol teated group (ET-LREH). After the administration, rats were sacrificed to get serum and liver to analyze antioxidant enzyme activity, glutathione and lipid peroxide contents. The body weight gain and feed efficiency ratio were decreased by alcohol administration, however, were gradually increased to a little lower level than the basal diet group by the combined administration of alcohol and LRE. The serum alanine aminotransferase (ALT), asparate aminotransferase (AST) and alkaline phosphatase (ALP) activities that were elevated by alcohol were significantly decreased by LRE administration. It was also observed that thiobarbituric acid reactive substances (TBARS) content, xanthine oxidase (XO), superoxide dismutase (SOD), catalase and glutathione peroxidase (GSH-Px) activities in liver that were increased by alcohol, were markedly decreased in the combined alcohol and LRE administered groups as compared with the alcohol administrated group. These effect of LRE within the alcohol groups were in a dose-dependent manner. The glutathione (GSH) content in liver was decreased by alcohol administration, however, increased after administering LRE. Teken together, these result suggest that ethanol extract of lotus root may have a possible protective effect on liver function in hepatotoxicity-induced rat by alcohol administration.

• Food Science and Preservation
• /
• v.21 no.1
• /
• pp.129-139
• /
• 2014

This study was conducted in order to investigate the optimal fermentation periods of the Smilax china L. leaves as a fermented tea via Aspergillus oryzae for 0 (non-fermented), and 10, 20, and 30 days (NF, F10, F20, F30). It was also observed for its quality characteristics. In the color and spectrum (400~700nm) of 1% tea water extract, NF was light yellow, whereas fermented tea (F10~F30) was light red color, and the F10 among F10~F30 has the clearest color and spectrum. Furthermore, acceptabilities of aroma and brightness were insignificantly different between NF and F10~30, while the mouth feel and overall acceptabilities were insignificantly distinct among all of the fermented teas. Therefore, these results suggest that the appropriate fermentation period for tea fermentation is 10 days. On the other hand, the total polyphenol and flavonoid content in the NF was the highest among all of the fermented teas. In the antioxidant parameters, EDA (electron donating ability), FRAP (ferric reducing antioxidant power), and LPOIA (lipid peroxidation inhibitory activity) in the NF were the highest among all fermented teas. Meanwhile, the XOI (xanthine oxidase inhibitory activity) was low, as well as insignificantly different from NF and F10~F30, whereas the AOI (aldehyde oxidase inhibitory activity) was markedly higher (38.09~41.70%) by the hot water tea extract (with or without fermentation), particularly the AOI that has increased via fermentation. In conclusion, the overall antioxidant activity tended to be reduced by fermentation; however, the EDA, FRAP and LPOIA in the fermented tea for 10 days was higher than the activities during 20~30 days of fermentation. There was a similar result in the color and acceptability of fermented tea for 10 days, which was remarkably better than those of 20-30 days. Therefore, fermented tea from the leaves of Smilax china L. could be expected to be used as a functional tea without the loss of inhibitory activity of both the XO and AO via fermentation.

• The Korean Journal of Mycology
• /
• v.3 no.1
• /
• pp.1-19
• /
• 1975

Since the importance of casing in fruit body formation of Agaricus bisporus has been emphasized, physico-chemical characteristics of casing materials were discussed by many workers and a mixture of peat and mineral soil as proper casing material has been adopted in many of mushroom growing countries. Because of limited resources of peat in Korea, it is necessary to find practical performance and substitutional materials for casing. The effect of casing on mycelial growth and mushroom yield of A. bisporus varied with materials, its combination and practices etc. The experiments to be discussed in this paper are concerned with pH and Ca of casing material which influence A bisporus, and changes of physico-chemical characteristics with mixing ratio of casing materials and its effect on A. bisporus. The optimum range of moisture content of each material, management of watering and application of physico-chemical characteristics casing materials was also investigated and re-use of weathered spent compost for casing material was described. 1. The effect of calcium on mycelial growth of A. bisporus at various pH in Halbschalentest showed different results with calcium sources. Best results were obtained around neutrality and fresh weight of fruit bodies grown in the range of pH 7 to 8 was highest among the tested levels. 2. Available moisture, pore space, organic matter, cation exchangeable capacity and exchangeable cation was increased by an increase of mixing ratio of peat in casing materials, while an adverse effect was obtained by addition of sand. 3. Mycelial growth on clay loam was more rapid at a lower bulk density of 0.75g/cc and at 20% moisture content on a dry weight basis at the same bulk density. 4. Mixing ratio of casing materials, 60 to 80 per cent by volume of peat mixed with 20 to 40 per cent of clay loam produced the highest yield of fresh fruit bodies and sand the lowest. However, per cent of open cap was highest in peat and lowest in sand. 5. Days required for fruit body initiation was shortened in mixtures of peat and clay loam by one to three days compared with other materials and the formation of flushes was clear. 6. The effect of some physico-chemical characteristics of casing materials on the fresh weight of fruit bodies were estimated by a multiple regression equation; Y=-923.86+$8.18X_1+8.04X_2+7.90X_3+0.12X_4+2.03X_5-0.82X_6-0.54X_7$ where $X_1,X_2,X_3,X_4,X_5,X_6,X_7$ are sand, silt, clay, available moistuer, porosity, organic matter and exchangeable cation respectively. The productivity of certain casing material could be predicted from this equation. 7. Fresh weight of fruit bodies was positively correlated with porosity exchangeable cation, organic matter, available moisture, silt and clay of materials; while sand was negatively correlated. On the contrary, sand was the unique factor reducing per cent of open cap. 8. Distribution of three phases of high productive casing material was concentrated in the range of 10 to 30 per cent solids, 15 to 30 per cent liquids, and 50 to 60 per cent in air volume. 9. Fresh weight of fruit bodies from peat was not affected with heavy watering but in clay loam and sandy loam severe crop losses occurred. Fresh weight of individual fruit was increased and open caps were decreased with heavy watering but light watering resulted in adverse effects: its effect was especially great in peat. 10. Optimum range of moisture content by weight on a dry basis was different with each casing material. To maintain optimum moisture content concerned with yield of fruit bodies and open cap, sandy loam and peat mixtures required daily watering of 0.6, 0.6 to 1. 2 and 1.2 to 2.4 liters per $3.3m^2$ of bed area, respectively. 11. Maximum yield of fruit body was recorded in the range of pF 2. 0 to 2. 5 of casing materials if organic matter content was below 4.2 per cent and in pF 1. 3 to 1.8 if above 7.1%. 12. pF curve of a certain casing material could be draws from moisture content at various pF values by multiple regression equations provided texture, organic matter and calcium of the casing material are given. Optimum moisture range of the casing materials also could be estimated by the equation. 13. It was possible to improve the phyico-chemical characteristics of clay loam and sandy loam by addition of weathered spent compost although the effect was less than in the case of peat. Fresh weight of fruit bodies wsa increased by addition of weathered spent compost but its effect was not as remarkable as peat. Accordingly, further studies will be required.

• Korean Journal of Veterinary Service
• /
• v.20 no.3
• /
• pp.261-279
• /
• 1997

The study for a effect of monitoring on bovine mastitis was conduced for improvement of raw milk from Jan. to Dec. in 1996. Sampling the milk of 367 cows(1, 406 quarters) from 5 herds in Inchon and were carried out California mastitis test(CMT), somatic cell count(SCC), isolation of pathogens and antibiotic sensitivity tests. The results were summarized as follows, 1. The number of bovine mastitis was 177 cows(48.2%) and 371 quarters(26.4%) : clinical mastitis : 25 cows(6.8%), 32 quarters(2.3%) and subclinicsl mastitis : 152 cows(41.4% ), 339 quarters(24.1%). Incidence rate of mastitis by season were Summer 52.0%, Fall and Winter 48% and Spring 41%. Incidence rate of mastitis by quarters were Summer 30%, Fall 28%, Winter 25% and Spring 21%, respectively. 2. In the distribution of CMT degree by quarter, CMT positive(CMT$\pm$) of 1, 406 quarters milk were 50.1% (704 quarters). The ratio of CMT positivity by quarter were left front quarter 55.8%, right front quarter 48.9%, right hind quarter 48.6% and left hind quarter 47% The ratio of CMT positivity by season were Summer 54.1%, Fall 49.7%, Spring 48.5% and Winter 48% 3. The highest mean SCC by season among 5 herds was "A" herd. Mean SCC (cell/ml) of A herd were Summer 2, 032, 000cells/ml, Fall 1, 109, 000cells/ml, Winter 782, 000cells/ml and Spring 577, 000cells/ml. The lowest mean SCC by season among 5 herds was "E" herds. Mean SCC of E herd were Summer 1, 064, 000cells/ml, Spring 795, 000cells/m1, Fall 429, 000cells/ml and Winter 400, 000cells/ml. Mean SCC of the other herds by season were little difference. 4. The milk samples of "A" herd were collected from 10 cows. In 3 seasons, mean SCC of No. 2 and 3 cows were than 1, 000, 000cells/ml. In 1 season, mean SCC of No. 6, 7 and 8 cows were than 1, 000, 000cells/ml. The more than mean SCC 1, 000, 000cells/ml of cows by season were distributed Summer 4 cows, Winter 3 cows, Spring and Fall 1 cow respectively. The milk samples of "B" herd were collected from 14 cows. In 3 seasons, mean SCC of No. 1 cow was more than 1, 000, 000cells/ml. In 2 seasons, mean SCC of No. 5, 9 and 14 cows were more than 1, 000, 000cells/ml. In 1 season, No. 3, 6 and 7 cows were more than 1, 000, 000cells/ml. The more than mean SCC 1, 000, 000cells/ml of cows by season were distributed Fall and Winter 4 cows respectively, Summer 3 cows and Spring 1 cow. The milk samples of "C" herd were collected from 18 cows. In 2 seasons, mean SCC of No. 16 cow was more than 1, 000, 000cells/ml. In 1 season, mean SCC of No. 1, 2, 6, 7, 13, 15 and 18 cows were more than 1, 000, 000cells/ml respectively. The more than mean SCC 1, 000, 000cells/ml of cows by season were distributed Summer 5 cows, Fall 3 cows, Spring 2 cows and Winter 1 COW. The milk sampes of "D" herd were collected 24 cows. In 3 season, mean SCC of No. 14 cow was more than 1, 000, 000cells/ml. In 2 seasons, mean SCC of No. 14 and 18 cows were more than 1, 000, 000cells/ml. In 1 season, mean SCC of No. 1, 2, 3, 8, 12, 17, 19, 20 and 21 cows were more than 1, 000, 000cells/ml. The more than mean SCC 1, 000, 000cells/ml of cows were distributed Fall 15 cows, Spring and Winter 4 cows respectively and Summer 3 cows. The milk samples of "E" herd were collected from 27 cows. In 2 seasons, mean SCC of No. 6, 7 and 21 cows were more than 1, 000, 000cells/ml. In 1 season, mean SCC of No. 2, 4, 7, 11, 14, 16 and 23 cows were more than 1, 000, 000cells/ml. The more than mean SCC 1, 000, 000cells/ml of cows were distributed Spring and Fall 5 cows respectively, Summer and Winter 2 cows, respectively. 5. The rate of isolated pathogenic microorganisms from bovine mastitis were summarized as follows : Staphylococcus sp 168 strains(45.8%), Streptococcus sp 82 strains(22.3%), Gram(-) sp 45 strains(12.3%), Gram(＋) sp 51 strains and the other sp 21 strains(5.7%). 6. The highest of antibiotic sensitivity test of each microorganism was summarized as follows : Staphyolcoccus sp - cephalosporin 76%, gentamicin 55%, Streptococcus sp - ampicillin 61%, cephalosporin 63%, Gram(-) sp - gentamicin 58%, Gram(＋) sp - cephalosporin 63%, The other sp - cephalosporin 90%. Microorganisms showed the highest sensitivity(68%) to cephalospsorin. Microorganisms showed the highest sensitivity(68%) to cephalospsorin.

• The Korean Journal of Physiology
• /
• v.7 no.1
• /
• pp.23-31
• /
• 1973

Numerous factors concern with the absorption of substances through the membrane of the gastrointestinal tract. To simplify the experimental condition, present work has been restricted to observe the disappearance rate of substance from the intestinal loop which was made in the jejunum, 70 cm apart from the pylorus of the adult rabbit. The purpose of the study is to clarify the absorption of urea through the jejunal wall is solely attributable to the concentration difference between the luminal fluid and plasma, and to observe the effect of adding red pepper upon the rate of absorption. The rabbits were anesthetized with nembutal, 35mg/kg I.V. Jejunal loop was made by ligating at 2 spots, 70 cm and 80cm apart from the pylorus. After rinsing with normal saline solution through the polyethylene tubing inserted from the end of the loop, 8 ml of test solution was placed through the same tubing. The test solution contained 200 mg% of urea and 150mg% of polyethylene glycol(M.W. 4,000) in normal saline solution. Right after placing the test solution the first specimen was taken through the tubing, and successive samplings were performed at 5, 10, 20, and 30 minutes. Logarithm of the difference of urea concentration between the luminal fluid and plasma was plotted against time elapsed after the onset of the experiment. If straight line is revealed, it would verify the nature of transport mechanism as diffusion, obeying the Fick's principle. The concentration of polyethylene glycol (PEG) was also measured in order to examine the change in the volume. PEG was used as the marker substance because it is not absorbable in the intestinal tract. Consequently the concentration of PEG relates inversely to the volume of the loop. Instantaneous concentration of urea in the loop times the volume will give the amount of urea remaining in the luminal fluid. The change in the amount of any substance is directly relate to the volume of the compartment and differs from the change in the concentration which is independent of the volume. After completion of the experiment without red pepper, it was added in the test solution and was centrifuged after thorough mixing. Supernatant of the mixture was placed in the loop and similar sampling were performed with the same time intervals that of previous run in order to observe the effects of the red pepper on the passive transport of the water soluble small substance, urea. The results obtained were as follows: 1. Logarithm of the concentration difference of urea between the luminal fluid and plasma was diminished exponentially as time elapsed. The decay constant in the experiment without red pepper was 0.0563/min. By adding red pepper in the test solution as much as the concentration rose to 4,000 mg% and 8,000 mg%, the decay constants were lowered to 0.0493/min and to 0.0506/min, respectively. The time interval by which the concentration difference dropped to one half of the initial value was prolonged. Without red pepper the half concentration time was 13.30 minutes, and by adding extract of red pepper, 15.31 minutes and 15.71 minutes were revealed. 2. The profile of the diminishing rate of tile amount of urea was quite different from that of the concentration because of the change in the volume of the loop during the observed period. 3. By adding the extract of red pepper, it slowed down the rate of absorption of urea in the intestinal loop, suggesting an increase in the diffusional barrier. 4. Larger dosage of red pepper brought an increase in the secretion of intestinal fluid with concomitant expansion of the luminal volume, and the retardation of the absorption of urea was noticed. This effect was largely dependent on the sensitivity of the individual animal to the red pepper, extract. The amount of urea remained after 10 minutes interval was 55.5% of the initial amount in the experiment without red pepper. On the other hand it was not consistent after administration of red pepper, showing 50.6% and 66.5% of the initial figures by adding 400 mg and 800 mg of red pepper in the test solution, respectively. It was postulated that symptom of diarrhea often encountered by taking a hot (red pepper) food might be attributable to the increase of secretion and the retardation of absorption in the intestinal tract.

• Restorative Dentistry and Endodontics
• /
• v.24 no.4
• /
• pp.560-569
• /
• 1999

Blood supply rather than nerve supply implies pulp vitality. To evaluate pulp vitality clinically, electric pulp test and thermal test which are based on sensory nerve response have been used in addition to many auxiliary data such as past dental history, visual inspection, radiographic examination, percussion, palpation and transillumination test. However, reactivity of the nerves to the stimulation is not synonymous with normalcy. Therefore measurement of pulpal blood flow using a laser Doppler flowmeter became a new trial to test the pulp vitality. The purpose of the present study was to evaluate normal pulpal blood flow level of maxillary teeth in adult to provide a guideline in determining the vitality of dental pulp. Pulpal blood flow was measured in maxillary central and lateral incisors, canines, first and second premolars and first molars of seventy nine adults of 22 - 30 years old using a laser Doppler flowmeter (PeriFlux 4001, Perimed Co., Stockholm, Sweden, 780 nm infrared laser, 1mW). For directly-made splints, silicone rubber impressions were taken directly from the mouth. For indirectly-made splints, alginate impressions were taken from the mouth and stone cast were made. After making depressions on the buccal surfaces of the cast teeth to indicate the hole positions, second impressions with vinyl polysyloxane putty were taken from the cast. Holes for the laser probes were made at the putty impressions 4mm above the gingival level. Laser probe (PF416 dental probe, 1.5mm) was inserted in the prepared hole and the splint was set in the mouth. After 10 minutes of patient relaxing, pulpal blood flow was recorded for 5 minutes on each tooth. The recorded flow was saved in the computer and calculated with a software 'Perisoft' version 5.1. Pulpal blood flow was also recorded in six teeth of five individuals with no response to electric pulp test and cold test, with periapical radiolucency, or with history of root canal treatment to compare with nonvital teeth. The difference between the mean flow values of each group of teeth were analyzed using one-way ANOVA and Duncan's Multiple Range test. The results were as follows: 1. The average pulpal blood flow values of all the tested teeth of each location were between 9 - 16 Perfusion Unit. Pulpal blood flow value was highest in maxillary lateral incisors, followed by first premolars, second premolars, canines, central incisors, and then first molars (p<0.01). 2. In six anterior teeth, indirectly-made splint group showed higher pulpal blood flow values than directly-made splint group (p<0.01). In posterior teeth, however, there was no significant flow value difference between directly-made splint group and indirectly-made splint one (p>0.05). 3. Teeth with vital pulps showed higher signal values than teeth with nonvital pulps (p<0.01), and the flow photographs showed heartbeat-synchronous fluctuations and vasomotions, while those were absent in non vital tooth.