• Applied Biological Chemistry
• /
• v.13 no.3
• /
• pp.261-268
• /
• 1970

1. A-value in the soils studied in this experiment were found to be about 40-50kg/10a (as $P_2O_5$) 2. Percentage of utilized phosphorus in Soybeans was 10%. 3. The utilization and A-value of phosphorus were very different among the varieties of soybean plants, and the range was about 30%. 4. A/M-value (A means maximum value of total amount of available phosphorus and M means minimum value of absorbed phosphorus by plants from soils) indicated the critical range of available phosphorus to the crops.

• Cross-Cultural Studies
• /
• v.39
• /
• pp.381-406
• /
• 2015

Russian nasal consonants / m /, / n / have a feature value not only [+consonant] in common with obstruents, but also [+sonorant] in common with vowels. Nasal / m /(bi-labial) and / n /(dental) have the same place of articulation but different manner of articulation. The feature value of / m / is [+cons, +son, +nas, +ant, -cor, -high, -low, -back, -cont, -del, rel, -strid, +voic], and that of / n / is [+cons, +son, +nas, +ant, +cor, -high, -low, -back, -cont, -del, rel, -strid, + voic]. There is a difference in feature [cor] value of / m / and / n /. In this study it is confirmed that it is a fact that the Russian nasal consonants behave differently from the other consonants in each phonological phenomenon due to their phonological characteristics. The preceding voiced obstruent is changed to an unvoiced one in a process where the last voiceless obstruent in the consonant cluster ' voiced obstruent + nasal /m/ + voiceless obstruent' skips the nasal consonant and spreads its feature value to the preceding voiced obstruent transparently because of the feature [+sonorant] of the nasal consonant. The coronal nasal /n/ participates in a palatalization with the following palatal actively and palatalize preceding plain consonants passively because of markedness hierarchy such as 'Velar > Labial > Coronal'. But the labial nasal /m/ is palatalized with the following velar palatal actively and participates in a palatalization with the following coronal palatal passively. This result helps us confirm the phonological difference of /m/ and /n/ in a palatalization. When the a final consonant is nasal, the unvoicing phenomenon of a final consonant doesn't occur. In such a case as cluster 'obstruent + nasal' the feature value [voiced] of the preceding obstruent doesn't change, but the following nasal can assimilate into the preceding obstruent. When continuing the same nasals / -nn- / in a consonant cluster, the feature value [+cont] of a weak position leads the preceding nasal / n / to be changed into [-cont] / l /. Through the analysis of the frequency of occurrences of consonants in syllabic onsets and codas that should observe the 'Sonority Sequence Principle', the sonority hierarchy of nasal consonants has been confirmed. In a diachronic perspective following nasal / m /, / n / there is a loss of the preceding labial stop and dental stop. But in clusters with the velar stop+nasal, the two-component cluster has been kept phonetically intact.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.123-126
• /
• 2002

Samples of Nb/Al-Al$O_{x}$/Nb tunnel junction with the size of 50$\mu$m $\times$ 50$\mu$m were fabricated by employing self-aligning and reactive ion etching technique. In the samples with high-quality, $V_{m}$ value (the product of the critical current and subgap resistance measured at 2 mV) was 34 mV at the critical current density $J_{c}$ = 500 A/$cm^{2}$ and $V_{g}$ value (the gap voltage) was 2.8 mV. In the higher $J_{c}$, voltage fluctuation in the current rising at the gap voltage was observed. The $V_{m}$ and $J_{c}$ value were 8 mV and 900 A/$cm^{2}$, respectively.

• Journal of Korean Society of Forest Science
• /
• v.4 no.1
• /
• pp.24-25
• /
• 1965

A statistical study was made on the size of sample plot to be used in the preparation of a yield table. This has always been an important problem needing solution in Korea. For this purpose, 3 replications of Korean white pine plantings with block size of $80m{\times}80m$ were established in the Kwangneung Experimental Forest. A location map was prepared of the pines in the blocks and the heights and the breast height diameters measured. Then those blocks were divided into 64, 64, 16, 16, 4, 4, and 1 standed $40m{\times}80m$ and $80m{\times}80m$ each. After these divisions, the average heights, average breast height diameters, standard deviations and coefficient of variations were computed for the plots and averaged according to plot size. As the results of these computations, it was shown that the standard deviation and the coefficient of variation suddenly increased with the beginning of an increase in plot size. However, these indicated an approximately constant value at a certain limit. Although the average value decreases with the initial increase in plot size, it also indicates an approximately constant value at a certain limit. This limit was between $20m{\times}40m$ and $40m{\times}40m$. With the purpose of evaluating these facts, the average height and the average diameter were computed for the number of standing trees in the $10m{\times}10m$ plots. A negative (minus) relationship was found between the number of standing trees and the average value. As a result of above evaluation, it was found that when the size of plot area was small, a larger estimated value, was obtained as well as a smaller standard deviation and coefficient of variation. It is possible, therefore, that an incorrect value might be used in the evalution of data as the stand structure could appear to be uniform when the plot size was small. In general, when the size of plot area is larger than $40m{\times}40m$, the probability of the difficulty occurring mentioned above is estimated to be small.

• Bulletin of the Korean Mathematical Society
• /
• v.46 no.6
• /
• pp.1079-1089
• /
• 2009

In this paper, we shall show that for any entire function f, the function of the form $f^m(f^n$ - 1)f' has no non-zero finite Picard value for all positive integers m, n ${\in}\;{\mathbb{N}}$ possibly except for the special case m = n = 1. Furthermore, we shall also show that for any two nonconstant meromorphic functions f and g, if $f^m(f^n$-1)f' and $g^m(g^n$-1)g' share the value 1 weakly, then f $\equiv$ g provided that m and n satisfy some conditions. In particular, if f and g are entire, then the restrictions on m and n could be greatly reduced.

• The Journal of the Korea Contents Association
• /
• v.12 no.3
• /
• pp.244-250
• /
• 2012

The results of analyzing the difference between performances of individual dosimeters on this research subjecting the PLD and TLD, which are the official personal dosimeters, through dosimetry are as follows. After scanning the integral dose using an automatic scanner, the values of two devices that went through dose adjustment process had a statistical difference in TLD and PLD measurements under each filming conditions which were 70kVp, 200mA, 0.012sec and 42kVp, 100mA, and 0.012sec (p<0.001 and p<0.001 respectively). As for the difference of measurement value between DAP and the two particles under 70kVp, 200mA, 0.012sec filming condition, TLD had a value lower than DAP average value by $44.2mGy{\cdot}cm^2$ and PLD had a value of $246.8mGy{\cdot}cm^2$ which was lower than DAP average value by $15.5mGy{\cdot}cm^2$, while under 42kVp, 100mA, 0.012sec filming condition, TLD had a value lower than DAP average value by $17.9mGy{\cdot}cm^2$ and PLD had a value of $82.6mGy{\cdot}cm^2$ which was lower than DAP average value by 7.6$mGy{\cdot}cm^2$. Also, compared to PLD, each of 10 devices measured dose value in TLD had a larger deviation between the particles, and for a reproducibility test which repeatedly measured one particle, PLD had ${\pm}1%$ which was lower than TLD's ${\pm}2%$. As such, PLD had a superior performance result in dose measurement capacities aspect compared to TLD, and therefore we could verify that PLD is more appropriate and advantageous in managing radiation-related task performing worker's personal radiation exposure management in the diagnostic radiation field.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.3
• /
• pp.398-407
• /
• 1999

In the present image processing technique, the concept of the gradient indicator(GI) has been introduced to find out the depth-of-field in sizing large particles ranging from $30{\mu}m$ to $30{\mu}m$ where using of the concept of the normalized contrast value(VC) is not appropriate. The gradient indicator is defined as the ratio of the local value to the maximum possible value of the gray-level gradient in an image frame. The gradient indicator decreases with the increases of the particle size and the distance from the exact focal plane. A particle is considered to be in focus when the value of the gradient indicator at its image boundary stays above a critical value. This critical gradient indicator($GI_{critical}$) is defined as the maximum gradient indicator($GI_{max}$) subtracted by a constant ${\Delta}GI$ which is to account for the particle-size effect. In the present ca.so, the value of ${\Delta}GI$ was set to 0.28 to keep the standard deviation of the measured particles mostly within 0.1. It was also confirmed that, to find the depth-of-field for small particles(${\leq}30{\mu}m$) with the same measurement accuracy, tho concept of the critical normalized contrast($VC_{critical}$) is applicable with 85% of the maximum normalized contrast value($VC_{max}$). Finally, the depth-of-field was checked for the size range between $10{\mu}m$ and $300{\mu}m$ when the both in-focus criteria ($GI_{critical}$ and $VC_{critical}$) were adopted. The change of the depth-of-field with the particle size shows good linearity in both the VC-applicable and the GI-applicable ranges with a reasonable accuracy.

• Journal of Biosystems Engineering
• /
• v.28 no.2
• /
• pp.89-96
• /
• 2003

This study was aimed to identify how the main body vibration of power tiller will be transmitted to the trailer, and to find out the basic information for demage reducing method of agricultural products during transportation. The vertical vibration acceleration level was measured at 6 positions, i.e. engine, hitch, seal and three parts of trailer (front middle, and rear) for the not driving but at the engine speeds of 1,000rpm and driving at 0.35m/s. The results of this research could be summarized as follows; 1. For not driving, the accumulated acceleration level up to 120Hz was 50% of total accelerations at engine part and those were 28~41% at other parts. Those up to 40Hz were 20~30% at engine and hitch part and 2~8% at trailer part. And those up to 20Hz were 13~20% at engine and hitch part and 1~4% at trailer part 2. For the driving with 0.35m/s at paved road, the average vertical accelerations were in the range of 0.005~0.058m/s$^2$. The lowest value of 0.005m/s$^2$ was showed at engine part and the value of 0.031-0.058m/s$^2$ was showed at trailer part. 3. For the driving with 0.35m/s, the accumulated value of average vertical accelerations showed the lowest value at engine parts md showed 5 times value of engine part at trailer part especially highest value at middle part of trailer. 4. For the driving with 0.35m/s, the accumulated acceleration level up to 120Hz was 75% of total accelerations at engine part and those were 20~42% at other parts. Ant those up to 20Hz and 40Hz were 24~26% at engine part and 0.1~0.6% at trailer part.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.1
• /
• pp.67-74
• /
• 2000

Recently, PTFE-polymide composites are being used self-lubricating parts for industrial field. Thus, this study is mainly concerned with friction and wear properties for the piston ring of non-lubricating air compressor which made of PTFE-polymide composites. The friction and wear test was carried out for the different composition ratio under the atomsphere room temperature and constant load of 7.69N and their friction and wear properties were compared with each other at various sliding speed. notable results are summarized as follows. PTFE 100% showed that friction coefficient was almost same values at 0.94 and 1.88m/s but the value was decreased at 2.83m/s because the friction temperature is higher than low speed. PTFE 80%-PI 20% showed the lowest mean friction coefficient at 2.83m/s. PTFE 20-PI 80% showed the highest friction coefficient at 0.94m/s and the value was decreased at high speed but the value is higher than other materials except PTFE 100 %. PI 100% showed the highest friction coefficient at 0.94 and 1.88m/s becuase adhesive wear mainly occurred that speed. PTFE 100% showed highest specific wear rate on the whole. Specific wear rate of PTFE 80%-PI 20% was almost the same value with PTFE 20%-PI80%. PI 100%showed the lowest value at high sliding speed because the friction surface was thicken and carbonated by high friction temperature.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.661-668
• /
• 2022

Various lean design and construction methods such as target value design, pull planning, value stream mapping have successfully transformed the commercial building construction industry into achieving improved productivity, higher design and construction quality, and meeting the target values of construction projects. Considering the significant advantages of lean, the accelerated dissemination and adoption of lean methods and tools for construction is highly desirable. Currently, the lean design and construction body of knowledge is imparted primarily through publications and conferences. However, one of the most effective ways to impart this soft knowledge is through getting students and trainees involved in hands-on participatory games, which can quickly help them truly understand the concept and apply it to real-world problems. The COVID-19 Pandemic has raised an urgent need of developing virtual games that can be played simultaneously from various locations over the Internet, but these virtual games should be as effective as in-person games. This research develops an online 3D simulation game for Target Value Design that is as effective as in-person games or possibly better in terms of knowledge capture and retention and enjoyable environment and experience. The virtual game is tested on volunteers using feedback from pre-and post- simulation surveys to evaluate its efficacy.