• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권11호
• /
• pp.627-634
• /
• 2000

In this paper, new micromachined tunble bandpass filters for multi-band millimeter-wave telecommunication systems are proposed. Two types of mm-wave tunable filters are fabricated using micromachning technology and the responses of the filters are measured. One is two-pole lumped elements filter and the other two-pole resonators filter. Frequency tunability of the filter is achieved by changing the gap between a common CPW ground plate and the movable cantilever beam connected to the transmission line with the controllable renge of 2.5${\mu}m$. The deflection of cantilever beam is measured with the applied DC voltage. With the applied bias voltage from 0 to 50 V, the fabricated filters show 0.6 GHz(2.3%) at 26.6 GHz, and 0.8 GHz(2.5%) at 32 GHz center frequency shift for the lumped elements and resonators filter, respectively. The life time of the fabricated gold cantilever structure are tested.

• 한국정보통신학회논문지
• /
• 제14권5호
• /
• pp.1071-1077
• /
• 2010

본 논문에서는 집중 소자형 6단자 위상 상관기 구조를 설계 제작하고, 이를 바탕으로 집중 소자형 6단자 위상 상관기를 이용한 L-대역 직접변환 수신 성능을 분석하였다. 제작된 L-대역 집중 소자형 6단자 위상 상관기 소자는 저항형 전력 분배기와 twist-wire 동축케이블을 사용하였으며, 낮은 대역에서 소형화 구조가 가능하고, 광역 특성을 갖는다. 집중 소자형 6단자 위상 상관기를 사용한 L-대역 직접변환 수신 성능은 집중 소자형 6단자 위상 상관기의 LO 단자와 RF 입력 단자에 각각 중심 주파수가 1.69 GHz이고 전력이 -20 dBm인 LO 신호와 QPSK 신호를 입력하여 측정하였다. 집중 소자형 6단자 위상 상관기를 사용한 직접변환 구조는 양호한 I/Q 디지털 신호를 복원할 수 있었다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.267-274
• /
• 1999

Since the seismic response of dams can be strongly influenced by the dam-reservior interaction in needs to be taken into account in the seismic design of dams. In general a substructure method is employed to solve the dam-reservoir interaction problem in which the dam body is modeled with finite elements and the infinite region of a reservoir using a transmitting boundary. When the water is modeled as a compressible fluid the equation is formulated in frequency domain. But nonlinear behavior of dam body cannot be studied easily in the frequency domain method. In this study time domain formulation of the dam-reservoir-soil interaction is proposed based onthe lumped parameter modeling of the reservoir region, The frequency dependent dynamic-stiffness coefficients of the reservoir are converted into frequency independent lumped-parameters such as masses dampers and springs. The soil-structure interactionis modeled using lumped parameters in similar way. the ground is assumed as a visco-elastic stratum on the rigid bedrock. The dynamic stiffnesses of the rigid surface foundation are calculated using the hyperelement method and are converted into lumped parameters. The application example demonstrated that the lumped parameter model gives almost identical results with the frequency domain formulation.

• Structural Engineering and Mechanics
• /
• 제84권2호
• /
• pp.285-293
• /
• 2022

Lumped damage mechanics (LDM) is a recent nonlinear theory with several applications to civil engineering structures, such as reinforced concrete and steel buildings. LDM apply key concepts of classic fracture and damage mechanics on plastic hinges. Therefore, the lumped damage models are quite successful in reproduce actual structural behaviour using concepts well-known by engineers in practice, such as ultimate moment and first cracking moment of reinforced concrete elements. So far, lumped damage models are based in the strain energy equivalence hypothesis, which is one of the fictitious states where the intact material behaviour depends on a damage variable. However, there are other possibilities, such as the energy equivalence hypothesis. Such possibilities should be explored, in order to pursue unique advantages as well as extend the LDM framework. Therewith, a lumped damage model based on the energy equivalence hypothesis is proposed in this paper. The proposed model was idealised for reinforced concrete structures, where a damage variable accounts for concrete cracking and the plastic rotation represents reinforcement yielding. The obtained results show that the proposed model is quite accurate compared to experimental responses.

• 대한전자공학회논문지TC
• /
• 제46권6호
• /
• pp.128-134
• /
• 2009

본 논문에서는 집중소자를 이용한 새로운 윌킨슨 전력 분배기를 제안한다. 제안된 구조는 기존 구조보다 임피던스 변환 과정에서 낮은 Q-지수를 가지도록 설계되어 우수한 대역폭 특성을 갖는다. 또한, 보다 작은 수의 집중소자를 사용하여 회로의 크기를 더욱 줄일 수 있다. 제안된 구조는 L-형태의 임피던스 정합회로를 사용하였으며 이에 대한 설계 방정식을 유도하였다. 시뮬레이션 결과, 제안된 구조는 기존 구조보다 임피던스 정합과 격리도에서 대역폭이 50% 우수하였고, 삽입손실은 줄어드는 장점이 있었다. 기존 구조와 제안된 구조의 집중소자 윌킨슨 전력 분배기는 중심주파수 2 GHz에서 설계, 제작 및 측정 되었다. 측정 결과, 제안된 구조는 중심 주파수에서 입력 반사계수($S_{11}$)는 -23.0 dB, 격리도($S_{23}$)는 29.0 dB, 삽입손실($S_{21}$)은 -3.12 dB 등의 우수한 특성을 보였으며 기존 구조보다 넓은 대역폭을 보임을 확인하였다.

• Journal of electromagnetic engineering and science
• /
• 제3권1호
• /
• pp.35-38
• /
• 2003

In this paper, compact lumped-element low-pass filter structure with two transmission zeros at second and third harmonics is presented. The use of lumped-elements and transmission zeros can provide the advantages of compact size, sharp cutoff and wide stop-band frequency response. The proposed low-pass filter is a modified Chebyshev low-pass filter type and is implemented by the use of low temperature co-fired ceramic (LTCC) technology. This filter has been verified by both simulation and experiment. The simulated and experimental results agree very well.

• 로봇학회논문지
• /
• 제18권1호
• /
• pp.82-87
• /
• 2023

This paper proposes a disturbance observer-based control for 6-DOF remotely operated underwater vehicles with model uncertainties. The sum of external disturbance and the forces generated from model parameters except for the inertial matrix of the hydrodynamic model is defined as a lumped disturbance in this paper. Then, the lumped disturbance caused by model uncertainties and the external forces is estimated using the disturbance observer. Fortunately, the disturbance observer is constructed as a linear form because all the elements of the inertial matrix of the hydrodynamic model are constants. To verify the proposed control scheme, we show that the actual lumped disturbance is similar to the estimated lumped disturbance obtained by the disturbance observer. Finally, the position tracking performance in the disturbance environment is confirmed through the comparative study with a traditional inverse dynamics PD controller.

• 대한전자공학회논문지TC
• /
• 제45권8호
• /
• pp.114-120
• /
• 2008

본 논문에서는 단락 개방 Calibration (SOC) 방법을 이용하여 MIM 구조로 구성된 커패시터의 기생 소자 값들을 추출하였다. Strip line 으로 구성된 short, open, MIM 구조들의 산란 파라미터 행렬들은 전자기 시뮬레이터 및 벡터 네트웍 분석기를 이용하여 측정되었다. 전자기 시뮬레이션들은 3차원 구조 해석에 적합해왔던 유한 유소법 (FEM)을 이용하여 수행되었다. 적층 구조 내부에 형성된 MIM 커패시터의 전자기 영향들은 집중 소자들로 구성된 II 형 등가 회로로 제안되었고, 2 포트 네트웍 해석을 수행함으로써, 측정된 산란 파라미터들과 등가회로 소자들 간의 관계를 보였다. 제안된 SOC 방법을 이용하여 추출된 집중 소자들은 주파수 독립적인 결과를 나타낸다.

• Structural Engineering and Mechanics
• /
• 제22권6호
• /
• pp.701-717
• /
• 2006

In the existing reports regarding free transverse vibrations of the Euler-Bernoulli beams, most of them studied a uniform beam carrying various concentrated elements (such as point masses, rotary inertias, linear springs, rotational springs, spring-mass systems, ${\ldots}$, etc.) or a stepped beam with one to three step changes in cross-sections but without any attachments. The purpose of this paper is to utilize the numerical assembly method (NAM) to determine the exact natural frequencies and mode shapes of the multiple-step Euler-Bernoulli beams carrying a number of lumped masses and rotary inertias. First, the coefficient matrices for an intermediate lumped mass (and rotary inertia), left-end support and right-end support of a multiple-step beam are derived. Next, the overall coefficient matrix for the whole vibrating system is obtained using the numerical assembly technique of the conventional finite element method (FEM). Finally, the exact natural frequencies and the associated mode shapes of the vibrating system are determined by equating the determinant of the last overall coefficient matrix to zero and substituting the corresponding values of integration constants into the associated eigenfunctions, respectively. The effects of distribution of lumped masses and rotary inertias on the dynamic characteristics of the multiple-step beam are also studied.

• 센서학회지
• /
• 제26권6호
• /
• pp.386-390
• /
• 2017

A $5^{th}$-order low-pass filter (LPF) chip implemented in a six-layer low-temperature co-fired ceramic (LTCC) dielectric substrate has been presented. Lumped elements constituting the LPF are designed three-dimensionally in multilayers. In order to improve the parasitic and mutual coupling effects between them, the LPF is designed by sequentially integrating the three-dimensional (3D) lumped elements, by comparing it to the results of the schematic circuit and 3D electromagnetic (EM) analysis. The designed 3D LPF chip was fabricated in a six-layer LTCC substrate as small as $4.0{\times}3.22{\times}0.68mm^3$. The measured return and insertion losses are less than -11 dB and -0.61 dB, respectively, below 1.5 GHz.