• International Journal of Automotive Technology
• /
• 제8권2호
• /
• pp.233-241
• /
• 2007

A lumped parameter model is proposed for the analysis of dynamic behaviour of a Passive Hydraulic Engine Mount (PHEM), incorporating inertia track and throttle, which is characterized by effective and efficient vibration isolation behaviour in the range of both low and high frequencies. Most of the model parameters, including volume compliance of the throttle chamber, effective piston area, fluid inertia and resistance of inertia track and throttle are identified by an experimental approach. Numerical predictions are obtained through a finite element method for responses of dynamic stiffness of the rubber spring. The experiments are made for the purpose of PHEM validation. Comparison of numerical results with experimental observations has shown that the present PHEM achieves good performance for vibration isolation.

• 한국철도학회논문집
• /
• 제15권2호
• /
• pp.162-171
• /
• 2012

본 연구에서는 곡선부를 주행하는 틸팅열차와 궤도와의 동적상호작용을 고려한 동적해석을 수행하기 위한 해석기법을 제시하였다. 본 연구에서는 3차원 차량요소를 이용하여 틸팅열차를 모형화하였으며, 틸팅열차의 곡선부 주행시 차량의 주행방향이 크게 변화하는 상황에서 주행속도 및 원곡선 반경에 상응하는 원심력의 표현, 선로의 캔트량, 차륜-레일의 접촉각 및 열차의 틸팅각 등을 고려한 동적상호작용해석 방법을 제안하였다. 제안된 해석방법은 기본적인 검증예제들에서 만족할만한 결과를 보여주었으며, 실제적인 문제에 적용이 가능할 것으로 기대된다.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.205-215
• /
• 2015

Common mode (CM) conducted interference are predicted and compared with experiments in a motor drive system of Electric vehicles in this study. The prediction model considers each part as an equivalent circuit model which is represented by lumped parameters and proposes the parameter extraction method. For the modeling of the inverter, a concentrated and equivalent method is used to process synthetically the CM interference source and the stray capacitance. For the parameter extraction in the power line model, a computation method that combines analytical method and finite element method is used. The modeling of the motor is based on measured date of the impedance and vector fitting technique. It is shown that the parasitic currents and interference voltage in the system can be simulated in the different parts of the prediction model in the conducted frequency range (150 kHz-30 MHz). Experiments have successfully confirmed that the approach is effective.