• Journal of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.303-306
• /
• 2005

Transient luminous events (TLEs; sprites, elves, jets and etc.) are lightning-related optical flashes occurring above thunderstorms. Since the first discovery of sprites in 1989, scientists have learned a great deal about the morphological, spectroscopic and electromagnetic characteristics of TLEs through ground and spacecraft campaigns. However, most of the TLE studies were based on events recorded over US High Plains. To elucidate the possible biasing effects, space-borne observations are needed and have their merits. Imager of sprites and Upper Atmospheric Lightning (ISUAL) on the FORMOSAT-2 satellite is the first instrument to carry out a true global measurement of TLEs from a low- earth orbit. In this short paper, we apply a common astronomical data analysis technique, two-color diagram, on the ISUAL spectrophotometer (SP) data. By choosing appropriated bandpasses and converting the measured flux of TLEs into the unit of magnitude, two-color diagrams of TLEs can be constructed. We demonstrate that two-color diagrams, which were constructed from the narrow-band spectrophotometer data, can be used to classify different types of TLEs and trace their temporal evolution. The amount of reddening due to Earth's atmosphere can also be estimated from two-color diagrams assembled from the broad-band spectrophotometer data.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.1
• /
• pp.125-131
• /
• 2001

In this study, we compared the properties of 23 high and 55 low price sunglass lenses with the standards in the ordinary optical properties, materials, coloration, UV, IR and luminous transmittance, color acceptance for traffic signal, chromaticity and contrast sensitivity. The ordinary optical properties of the lenses met comparatively the requirements of the KS standard. The HIGH-type and LOW-type lenses were primarily made by glass and acrylate, respectively. In the coloration, HIGH-type was in group around neutral color but LOW-type was distributed widely on the line between 570 nm and 485 nm. There are fails in 7% of HIGH-type and 18% of LOW-type in the stimulus purity of the luminous transmittance. Wavelength of the UV/VIS cut-off was over 350 nm for HIGH-type but 6% of LOW-type was under 350 nm. In the erythemal UV, all HIGH-type met the needs of standards but 5 LOW-type failed with DIN standard In the near UV, KS standard worked in stringency, and HIGH-type showed more failure than LOW-type. The characteristics of the IR transmittance of HIGH-type was better than that of LOW-type. In the color acceptance of traffic signal, all HIGH-type met the needs of ANSI standards but 21.8% of LOW-type failed with the standard. In the contrast sensitivity tested with various coloured sunglasses, the value increased with increasing of Land decreasing of test distance. In view of the results so far, HIGH-type met with excellent properties as compared with LOW-type.

• Korean Journal of Optics and Photonics
• /
• v.24 no.3
• /
• pp.135-142
• /
• 2013

Two white light emitting diodes(LEDs) were fabricated by using two kinds of yellow phosphor, YAG:Ce and $(Sr,Ba)_2SiO4:Eu$, and their spectroscopic properties were analyzed as a function of temperature from room temperature to $80^{\circ}C$. The asymmetric double sigmoidal function was applied to both blue and yellow peaks of the emitting spectrum to obtain the center wavelength, the amplitude, the half width, and the skewness parameters. According to this analysis, the center wavelength of the blue peak shifted to longer wavelength while that of the yellow peak shifted to shorter wavelength. In addition, some of the skewness parameters were found to increase upon heating, which indicates that spectrum asymmetry becomes enhanced at higher temperatures. The changes in the color coordinates and the luminous efficacy were larger for the case of silicate-based white LED. These results suggest that the silicate-based white LED is inferior to the YAG-based white LED from the viewpoint of color stability, efficacy and color rendering index.

• Journal of Fashion Business
• /
• v.13 no.6
• /
• pp.61-75
• /
• 2009

The objective of this research is to the enhance the color function of work clothing : to research and analyze the hue and tone of work clothing colors to be used for machinery and heavy industries in national industrial complexes, Through this research, the color using problems which related with safety workers will be revealed. For this project, total 42 sets of work suits were sampled from 12 different companies in the machinery and construction industries in the national industrial complexes of Gyeongsang Namdo Province and 16 sets of work suits currently being sold in the market. The collected work suits samples were classified according to item types and design. Color measurements were taken thus: After calibration according to ASTM D1729 specifications of standardized configuration settings to match standardized luminous source D65(Daylight 6500K) in color cabinet BOTECK SuperLight-VI, the RGB values of the work suits were calculated using PANTONE Color Cue TX. The RGB values of the colors thus derived were converted into V/C values using the Munsell Conversion 9.0.6 and analyzed with Munsell's 10-color system and PCCS. The results were presented according to Munsell's color wheel and color and brightness distributions were expressed in table form, as well as presented as a tone map. Following analysis, color hue distribution was found to be concentrated around PB, and brightness distribution toward the low end and mid range of the scale. Saturation values were distributed mostly around the low end of the scale. Following color tone analysis according to PCCS, it became apparent that colors were mainly distributed around dkg, ltg, and g, at low- and mid-brightness and low-saturation. Therefore, it may be concluded that colors used in work suits in the machinery and heavy industries are mainly cool colors, at low- and mid-brightness and low saturation. It is conjectured that such colors were applied uniformly in the workplace in order to serve certain functions, such as concealment of stains and contamination. Therefore, it follows that the utilization of colors, among other functions served by working clothings, must be taken into consideration in order to enhance safety and efficiency.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.12
• /
• pp.2262-2267
• /
• 2010

In order to analyze the reason of wall blackening, which affect the decline of lifetime in a ceramic metal halide lamp, we carried out the deterioration of ceramic tubes by a change in operating conditions with arc tubes of two types of spherical and cylindrical, and we have confirmed the cause of wall blackening through the analysis of element composition and spectrum from SEM/EDS and spectrum analyzer. Wall blackening of tungsten was shown by sputtering from ignition in 20 minute on/off condition and wall blackening from chemical reaction between PCA wall and rare earth halides was shown significantly in a condition without on/off test. Especially, the wall blackening and the decline of luminous flux were reduced by inner convection in spherical type arc tube. Moreover, the color temperature and color coordinate were changed by reduction of emission spectrum of Dy which causes the chemical reaction with PCA wall.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.36-36
• /
• 2008

Organic light-emitting device (OLED) have become very attractive due to their potential application in flat panel displays. One important problem to be solved for practical application of full-color OLED is development of three primary color (Red, Green and Blue) emitting molecule with high luminous operation. Particularly, the development of organic materials for blue electroluminescence (EL) lags significantly behind that for the other two primary colors. For this reason, Flu-Si was synthesized and characterized by means of high-resolution mass spectro metry and elemental analyses. Flu-Si has the more wide optical band gap (Eg = 3.86) than reference material (Cz-Si, Eg = 3.52 eV). We measured the photophysical and electrochemical properties of Flu-Si. The HOMO-LUMO levels were estimated by the oxidation potential and the onset of the UV-Vis absorption spectra. The EL properties were studied by the device fabricated as a blue light emitting material with FIrpic.

• Journal of the Korean Institute of Rural Architecture
• /
• v.10 no.3
• /
• pp.27-34
• /
• 2008

Recently, the outdoor lighting of architectural Facade has increased for the improvement of night-scape in urban and coastal resort. The purpose of this research is to analyze lighting characteristics; Luminance, Illuminance, Color Temperature, Chromaticity in Gyengpo Park of Eastern famous coastal resort. The result of this paper is as follows: 1) The Luminance ratio was measured that compare to the 1:10 criterion(IESNA) was in excess to the most building except "K". Because of these condition, Luminance environments was injurious to visual health the overuse of the outdoor lighting or glare to the eyes. 2) The level of vertical Illuminance value was insufficient 33.3% among the cases of survey with 4Lux standard of CIE. 3) The kinds of outdoor lighting of BLDG were increased lighting emitting diode(LED), metal halide(MH) instead of reduction trend of neon, fluorescent light, halogen. As the crisis of Energy resources we will be investigate adapt method of outdoor lighting, which design is based on economical efficiency by the use of optimum lighting.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.30 no.3
• /
• pp.30-38
• /
• 2016

In this research, a 6W white LED package with a Glass Remote Phosphor was developed to improve the life of an LED package. The Glass Remote Phosphor was fabricated by the Phosphor in Glass (PiG) method, wherein phosphor YAG:Ce was mixed with glass frit and then heat treated. A paste with 75wt.% of a phosphor substance and 25wt.% glass frit was coated on a glass substrate two times using the screen-printing technique and heat-treated at $800^{\circ}C$ ; this structure gave a luminous efficacy of 136.1lm/W, color rendering index of 74Ra, and color temperature of 5,342K, thus satisfying the requirements as a light source for lighting. Moreover, an IES LM-80 accelerated life test was conducted on the same LED package for 6,000h in order to estimate the L70 lifetime based on IES TM-21. The results showed guaranteed lifetimes of 213,000h at $55^{\circ}C$, 245,000h at $85^{\circ}C$, and 209,000h at $95^{\circ}C$.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1111-1117
• /
• 2011

We was designed the portable LED light which can shadowless shooting and developed using a high-power LED that medical attention as a new lighting components for structural confirmation of oral dental area, medical and surgical lesions in the local area. LED which applied to the development, was used the 3-color LEDs for possible of implement a variety of colors and adjusted the light intensity. It is being magnified of delicacy expressiveness and three-dimensional for tone of the subject-specific. It has been developed a highly efficient light module that LED is used to consider the electrical characteristics and optical properties. SMPS has We was designed the portable LED light which can shadowless shooting and developed using a high-power LED that medical attention as a new lighting components for structural confirmation of oral dental area, medical and surgical lesions in the local area. LED which applied to the development, was used the 3-color LEDs for possible of implement a variety of colors and adjusted the light intensity. It is being magnified of delicacy expressiveness and three-dimensional for tone of the subject-specific. It has been developed a highly efficient light module that LED is used to consider the electrical characteristics and optical properties. SMPS has produced for use in mobile that can be driven at low voltage. In addition, it was also possible to implement a variety of colors from monochromatic Light to polychromatic light using by PWM control method and were available 32,768.

• Korean Institute of Interior Design Journal
• /
• v.22 no.1
• /
• pp.47-54
• /
• 2013

For the office work environmental design, the importance of the design management is increased to improve operation efficiency as well as the aesthetic environmental implementation of the function today. Lighting is a required element ineffective operation environment. It has become more important for the aesthetic, economic, and practical reasons, to consider the luminous environment and the lighting of visual tasks separately. When the brightness is insufficient, productivity deteriorates, and the layout of the lighting located by mistake causes the fatigue of eyes. Productivity rises to office in a large number of studies so as satisfaction is low in general in the dark office, and to be bright. Therefore the purpose of this research is to suggest the right direction of lighting design of office building area. 11newly renovated office buildings are selected for this luminous environment research. We could conclusions as following through this research. First, it was planned brighter than the recommended lighting level in the most space. It shows that the accurate lighting design criteria is needed in order to achieve proper lighting environment. Second, the application of the LED lighting fixtures is continuously increased in the recent office lighting environment. It is explained that it is applied for reasons of the electrical energy reduction and the maintenance efficiency with the long life time. Third, the consideration of the lighting plan for the difference of working types is not enough. with various communication configuration through an independent plan, and the effective lighting plan that appropriateness preparation design and energy saving area vailable must be applied. Fourth, the lighting environment of the lobby needs a specialized lighting plan as are presentative space of the building.