• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.49 no.6
• /
• pp.360-364
• /
• 2023

Xanthogranulomatous inflammation (XGI) is an uncommon type of chronic inflammation and is histologically characterized by foamy histiocytes and giant cells. The most common sites of occurrence are kidneys and gallbladder. The etiology remains controversial. Involvement of the lower jaw bone is rare. In this study, we report a case of XGI presenting in the lower jaw.

• Journal of Multimedia Information System
• /
• v.6 no.2
• /
• pp.67-74
• /
• 2019

Bone density is one of the factors in the early failure of dental implants and doctors should make a preoperative assessment of jaw bone density using patient's CT data before dental implant surgery in order to find out whether the patient has osteoporosis and osteopenia. The main goal of this study was to propose a method that based on image processing techniques in order to provide accurate information about where to drill and place an abutment screw of implants in the jaw bone for doctors and reduce human activity for the estimation of the local cancellous bone density of mandible using CT data. The experiment was performed on a computed tomography data of the jaw bone of two different individuals. We assumed that the result of the estimation of jaw bone density depends on the angle of drilling and average HU (Hounsfield Unit) values were used to evaluate the quality of local cancellous bone density of mandible. As a result of this study, we have been developed a toolbox that can be used to estimate jaw bone density automatically and found a positive correlation between the angle of the drill and time complexity but a negative correlation between the diameter of the drill and time complexity.

• Imaging Science in Dentistry
• /
• v.41 no.2
• /
• pp.59-62
• /
• 2011

Purpose : This study was performed to evaluate the changes of jaw bone density around the dental implant after placement using computed tomography scan (CT-Scan). Materials and Methods : This retrospective study consisted of 30 patients who had lost 1 posterior tooth in maxilla or mandible and installed dental implant. The patients took CT-Scan before and after implant placement. Hounsfield Unit (HU) was measured around the implants and evaluated the difference of HU before and after implant installation. Results : The mean HU of jaw bone was 542.436 HU and 764.9 HU before and after implant placement, respectively (p<0.05). The means HUs for male were 632.3 HU and 932.2 HU and those for female 478.2 HU and 645.5 HU before and after implant placement, respectively (p<0.05). Also, the jaw bone with lower density needed longer period for implant procedure and the increased change of HU of jaw bone was less in the cases which needed longer period for osseointegration. Conclusion : CT-Scan could be used to assess the change of bone density around dental implants. Bone density around dental implant was increased after placement. The increased rate of bone density could be determined by the quality of jaw bone before implant placement.

• Imaging Science in Dentistry
• /
• v.49 no.3
• /
• pp.235-240
• /
• 2019

Osteosarcoma is the most common primary bone tumor after plasma cell neoplasms. Osteosarcoma has diverse histological features and is characterized by the presence of malignant spindle cells and pluripotent neoplastic mesenchymal cells that produce immature bone, cartilage, and fibrous tissue. Osteosarcoma most frequently develops in the extremities of long bones, but can occur in the jaw in rare cases. The clinical and biological behavior of osteosarcoma of the jaw slightly differs from that of long-bone osteosarcoma. The incidence of jaw osteosarcoma is greater in the third to fourth decades of life, whereas long-bone osteosarcoma mostly occurs in the second decade of life. Osteosarcoma of the jaw has a lower tendency to metastasize and a better prognosis than long-bone osteosarcoma. Radiographically, osteosarcoma can present as a poorly-defined lytic, sclerotic, or mixed-density lesion with periosteal bone reaction response. Multi-detector computed tomography is useful for identifying the extent of bone destruction, as well as soft tissue involvement of the lesion. The current case report presents a fibroblastic osteosarcoma involving the left hemimandible with very unusual radiographic features.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.22 no.1
• /
• pp.37-53
• /
• 2006

Purpose: The purpose of this study was to investigate the influences of the jaw dimension on the bone stress. Materials and Methods: Root analogue implant of Frialit-2 Synchro model in the jaw bone of various thickness from 8mm to 13mm were modelled axisymmetrically for a series of finite element analyses. As load conditions, non-axisymmetric lateral load of 20N and an oblique load of 50N, as well as an axisymmetric vertical load of 50N were taken into consideration. Results: The cervical area of implant under the axisymmetric load and the base cortical bone under the non axisymmetric load condition were the areas of main concern where the higher level of stress were likely to be obtained. Conclusion: The results indicated that at the two concerned areas drastically different stress distribution could take place as a function of the load conditions. Under the vertical load, the lower level of stress was observed for the narrow jaw bone at the cervical cortical bone whereas stress at the base cortical bone remained virtually unchanged. Under the non axisymmetric load condition, however, the stress at the base cortical bone increased very rapidly as the jaw bone width increased without inducing any significant change in the stress level at the cervical area.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.2
• /
• pp.148-155
• /
• 2008

The aim of the study is to interpret the distribution of occlusal force by 3-dimensional finite element analysis of ISP(Implant Supported Prosthesis) supported by minimum number of implant to restore the edentulous patients. For this study, the Astra Tech implant system is used. Geometric modeling for 6 and 4 fixture ISP group is performed with respect to the bone, implant and one piece superstructure, respectively. Implants are arbitrarily placed according to the anatomical limit of lower jaw and for the favorable distribution of occlusal force, which is applied at the end of cantilever extension of ISP with 30mm. Element type is tetrahedral for finite element model and the typical mechanical properties, Young's modulus and Poisson's ratio of each material, cortical, cancellous bone and implant material are utilized for the finite element analysis. From this study, we can see the distribution of equivalent stress equal to real situation and speculate the difference in the stress distribution in the whole model and at each implant fixture, From the analysis, the area of maximum stress is distributed on distal contact area between bone and fixture in the crestal bone. The maximum stress is 53MPa at the 0.2mm area from the bone-implant interface in the maximum side for 300N load condition for 4 fixture case, which is slightly less than the stress calculated from allowable strain. This stress has not been deduced to directly cause the loss of crestal bone around implant fixture, but the stress can be much reduced as the old peoples may have lower chewing force. Thus, clinical trial may be performed with this treatment protocol to use 4 fixtured ISP for old patients.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.5
• /
• pp.478-483
• /
• 2010

Bisphosphonates are synthetic analogue and have high affinity on bone remodeling site. Since they have a long half-reduction time, they accumulate at bone and act for a long time. They are widely used in osteo-porosis derived from imflammatory bowel disease or postmenopausal osteoporosis patient for bone mineral density improvement. In addition, they neutralize hypercalcemia owing to bone metastasis of malignancy. However, a jaw bone necrosis was recently reported in some patients who have taken bisphosphonates for a long time. It is called Bisphosphonate Related Osteonecrosis of Jaws (BRONJ). It can come spontaneous-ly, but more often after oral surgery including tooth extraction. In this case, a 80-year-old woman was treated with bisphosphonate (sodium alendronate) for 2 years to improve bone mineral density. She had her left lower second molar tooth extracted at local clinic. After extraction, she had inflammatory symptoms like a pain, a cheek swelling, and a discharge of pus. She was referred to our clinic for treatment. We treated meticulously from dressing to surgery. After following up about 1.5 years, the jaw lesion was successfully healed. So we report this case.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.3
• /
• pp.209-214
• /
• 2012

This case report assessed the three-year follow-up results after autogenous and xenogenic bone grafts of the jaw. Autogenous particulated bone with osteogenesis and osteoinductive properties and xenogenic Bio-Oss$^{(R)}$ (Geistlich Pharma AG, Wolhusen, Switzerland) graft materials with osteoconductive propertes were grafted into cystic cavities that remained after multiple cystic enucleation in the right upper posterior maxilla and the left lower posterior mandible. Six months later, increased radiopacity in the grafted area was seen. Three-year follow-up results with clinical and panoramic radiography after autogenous and xenogenic bony mixtures in jaw are reviewed and discussed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.2
• /
• pp.107-114
• /
• 2001

Objectives : To compare jaw bone density of young adults (control group) and post-menopausal women(experimental group) in periapical and panoramic film. Materials and Methods : The bone mineral density values of lumbar and femur were measured by dual-energy X-ray absorptiometry(DEXA) and T scores of lumbar were obtained. T scores were classified into 3 group (T<-2.5, $-2.5{\leqq}T<-1$, $-1{\leqq}T$). Radiographic densities of alveolar bones were measured from interdental bones of premolar, molar areas in the maxilla and mandible and expressed into copper step wedge thickness by Scion $Image^{(R)}$ program. We considered these values of step wedge thickness as bone density of alveolar bone. Panorama mandibular index(PMI) was calculated by the method that the height of the inferior cortex of the mandible was divided by the height from the lower border of the mandible to the superior edge of the mental foramen. Bone density of alveolar bone and PMI were analysed statistically. Results : There were significant differences in bone mineral density of lumbar and femoral neck between control and experimental groups. There were also significant differences in bone density of premolar and molar area of jaw between control and experimental groups by MANOVA test. When considered lumbar T variables, there was only difference in interdental bone density of maxillary molar area between control and experimental group, but there was interaction. Interdental bone density of experimental group was appeared higher in $-1{\leqq}T$ group and lower in T<-2.5 group than control group. There was significant difference in PMI between control and experimental groups, but there was also inter action, thus, PMI of experimental group was appeared higher in $-1{\leqq}T$ group and lower in T<-2.5 group than control group. Conclusion : There were significant differences of alveolar density and cortical bone thickness between young men and post-menopausal women in periapical and panoramic film. These differences were dependent on lumbar T.

• Journal of Korean Dental Science
• /
• v.8 no.2
• /
• pp.65-73
• /
• 2015

Purpose: Parathyroid hormone (PTH) therapy has drawn attention, as an alternative to anti-resorptive drugs since PTH accelerates bone density by anabolic action. The purpose of this study was to identify the effect of intermittent PTH administration on jaw bones of rat undergone bilateral ovariectomy. Materials and Methods: Nine female Sprague-Dawley rats were divided into three groups. PTH group was ovariectomized (OVX) to induce osteoporosis and PTH $30{\mu}g/kg$ was administered 1 week after the surgery. In OVX group, ovariectomy was performed and only vehicle was administered by subcutaneous injection 3 times per week. Control group was subjected to sham surgery. The animals were sacrificed 8 weeks after the surgery and specimens were obtained from ilium and upper and lower jaw bones. Histological investigation was carried out by using an optical microscope and micro-computed tomography was taken to examine structural property changes in each bone sample. Result: In the ilium, the bone volume ratio (bone volume/total volume, BV/TV) of PTH, OVX and control groups was $53.75%{\pm}7.57%$, $50.61%{\pm}12.89%$, $76.20%{\pm}5.92%$ (P=0.061) and bone mineral density (BMD) was $1.12{\pm}0.09$, $0.88{\pm}0.48$, $1.38{\pm}0.07g/cm^3$ (P=0.061). In the mandible, BV/TV of PTH, OVX and control groups was $64.60%{\pm}12.17%$, $58.26%{\pm}9.63%$, $67.54%{\pm}14.74%$(P=0.670) and BMD was $1.21{\pm}0.17$, $1.19{\pm}0.13$, $1.27{\pm}0.18g/cm^3$ (P=0.587). In the maxilla, BV/TV of PTH, OVX and control groups was $61.19%{\pm}8.92%$, $52.50%{\pm}11.22%$, $64.60%{\pm}12.17%$ (P=0.430) and BMD was $1.20{\pm}0.11$, $1.11{\pm}0.16$, $1.21{\pm}0.17g/cm^3$ (P=0.561). No statistically significant difference was found in any variables in all groups. Histological observation revealed that the ilium in OVX group demonstrated sparsely formed trabecular bones compared with other groups. However, upper and lower trabecular bones did not present significant differences. Conclusion: Intermittent administration of PTH appears to affect the microstructure of rat jaw bones, but statistical significance was not found. However, the measurements in this study partly implicated the possible anabolic effect of PTH in vivo.